RC10Talk - The Net's Largest Vintage R/C Community

Update I bought a really nice parts car (wide-body GP20) with a GS21 CR that must have sat on the shelves more than it ran. I am basically putting Inferno ST specific parts on the GP20. - Rebuilt the GS21CR with a new oil seal, new recoil starter/back plate seal, new throttle body dust boot. Parts: ...

I need to replace the battery connector on a old timer based nicad charger.
Are there any higher quality, easier to attach Tamiya connectors?

Or is this the best option?

https://www.amainhobbies.com/racers-edge-tamiya-type-connector-plugs-rce2480/p35608

Another for my growing X Factory hoard, I mean collection:

Red chassis rc10 team car.

Finally some real progress, got all 3 diffs completed - New 53T spur gear from Australia - New bearings from Boca bearings - Kyosho 5000 diff grease front and back, 30000 in center diff - Kyosho IFW34 non plastic brake discs - hopefully these don't melt as easily with the raging power of the GS21CR :P

I just finished this JRX-Pro chassis. All graphite cutout chassis and a lot of new parts.. This is my favorite buggy of all time and really tried to make it perfect..only thing that isn’t “correct” is the shock collars but the wide black ones really look nice. Do I have to put a body on it? https://...

Amazing work! the attention to detail and selection of parts is spot on!

Your builds really are next level!
Awesome once again

I picked up a TERX 75AM and TSC 411P set. They came attached to a nice 12L carrying case. I'll probably look to see if someone else needs this nice 12L because I have a few of them already.
.

The only thing I don't like about ceramic bearings is how loud they are.

I have Boca ceramic hybrids in one of my reels. It sounds awful when you cast it. At first, I thought that I screwed something up while switching bearings.

But once you get used to the noise, it casts like a dream.

The Dom.

Jammin J-550 Pro-SE Steering Enhancement Kit I have two of these kits…so I decided to open one up, install it on my Pro-SE and see what it’s all about. https://i.postimg.cc/CLRMcynn/6-F1-C2564-28-E7-4-D73-B3-EE-DBE9-D1-CA8-AB6.jpg The shock tower is the same shape as the original, slightly thicker a...

Overall..the camber link is raised, lengthened and made more perpendicular to the chassis centerline. Also aligning up better with the swept front arms..

Found a few more GPM alloy parts for this so on they go.... super-rare top deck and also the steering link. Just the front and rear gearbox eccentrics to add now. I have also added some Japanese mag decals across the battery straps and switched the motor to a red prism label 30deg 1990 Demon 27turn ...