RC10Talk - The Net's Largest Vintage R/C Community

Test print of front end , its low resolution 0.28 layer height and I'm using up some ancient PETG but it all lines up , I. Printing the rear now but again using up old filament so it's funky translucent blue and won't be finished till morning .

More power for my RC10L

Here's a Power Pacing Products OM-10 conversion for the RC10L that I recently finished. There isn't much info out there on this one, and only one magazine article on the company's later MID conversion. This conversion uses a narrow lower rear pod and t-bar with a proprietary bolt pattern. It also in...

Belt driven trans / transaxle; pre and post. A bit of post work as the gear shafts came out ~10.06mm, and the bearing inner races are ~9.93, so a little filing was needed. One day I am actually going to fully calibrate my printer, but that day isn't today. :D And these modern cameras put some much d...

With other projects I've been working on, I almost forgot about the latest makeover with the tractor. After I finished the JD, I really didn't like it. It looked pretty accurate, just not my taste....so after I retired, I tried one more time for something I like. All the decals on it (and the Bush H...

I purchased this roller from a guy that I horse-trade with semi regularly in regards to RC cars. He B/S/Ts in all RC, and he gives me a buzz when he gets "vintage" stuff. These are great guys to have on your side! From a couple of cars I had gotten off him previously, and some pics he had ...

So, after cleaning and polishing, electronics were added and most things dialed in. VIPER BUILD 2.jpg VIPER BUILD 3.jpg VIPER BUILD 4.jpg VIPER BUILD 5.jpg VIPER BUILD 7.jpg When it got time to choose a body, I knew that with the BBS style wheels, I couldn't go Nascar or anything American along thos...

Here ya go my cougar 2 works indoor runner

Build thread is here

https://www.rc10talk.com/viewtopic.php?f=28&t=46765

Thought I posted this already, anyone know anything about this chassis I believe it is a OK model ip400. Any info would be great cheers

My workstation is a bit of a nightmare, I'm in the process of building a 12m x 7.5m man cave/shed but until then I'm stuck in this space.

Step 1: Chassis Design.

Step 3: Chassis Fabrication and Assembly.

Step 4: Body Paint and Final Details.

This is my Trackmaster oval car. Repop Trackmaster chassis from FTW. Badger oval car transmission / sliders McAllister front lowering kit Novak electronics / Reedy Conquest 17 motor Bolink wheels Brewster Baker inspired body Build thread here: https://www.rc10talk.com/viewtopic.php?f=37&t=48166 ...

This is my Shorty bucking Bronco. Its an Axial SCX-10 rebuilt as a short wheel base truck in order to accommodate the short wheelbase of the beautiful Tamiya Bronco body. A STRC short wheelbase chassis kit was used along with STRC aluminum shock mounts. Short RC4WD aluminum shocks where used to get ...