RC10Talk - The Net's Largest Vintage R/C Community

Very "Bling"! not sure what else to say, the SRB rear end does address the hopping rear end but looks like it sits too far back and almost as primitive? well engineered though.

I was asked if i could make an improved steering knuckle for the Hirobo Zerda , they are a weakness and i had one brake myself , i managed to get a pair of knuckles for the Alien Mid that are stronger but hard to find so these are the ones i came up with , the red one on the right is a Zerda origina...

"Not the Bl##dy hex shafts worn out again ! "

The Zerda knuckle is now a free download on Thingiverse or it will be when they get round to it

My Yokomo Dogfighter YZ-834b, its staying

Looking nice and fresh How do the adjustable Caster front C hubs feel ?

To do a 12mm hex conversion could be fairly easy but first you need to find some wheel axles , the end of the dog bone is fairly standard size , same as the scorpion for example , probably ReRe optima axles would work but i don't know for sure , once you have the axles then designing and printing an...

For just messing about the Turnigy TrackStar 80 amp ESS from Hobby King would work fine .

Here's how the gears turned out , firstly there is one small blemish , there's a swell in the width of the gear teeth and a slight narrowing either side , it doesn't seem to affect the mesh and its almost certainly because i angled the gears on the bed so i could fit them all in , so printing them f...

The gears fitted the 5mm axles better than i expected , in time i'll make them a tighter fit but for now they are good enough to test , i fitted them to one of my spare 3d printed yz-834b gearbox's and the mesh is good , better than i expected so I've built up the gearbox and installed it in the Yo-...

Took about a minute to strip the first two gears :lol: so i rebuilt the box with just the diff and idler gear in resin and ran again with no holding back and got another 5 min before they failed , still no use at all but it was an interesting experiment , i have some Siraya Tech Blue engineering res...

Saw this on you tube and just had to share it here.
https://www.youtube.com/watch?v=wzN595nesWk

I've now fitted the metal crown gears that BattleTrack kindly supplied , I've run it a few more times , still sounds silly smooth and is so composed , of all my Vintage cars probably only the PB Mini Mustang drives better but I've not driven them back to back yet so I don't know , with getting the r...

Well done LoboNYC , good win !

therigliveson wrote: ↑Fri Oct 09, 2020 11:06 am Picked up a Mugen Bulldog II from fleabay...slow plan to clean up. Anyone know if I can whiten the wheels with peroxide bath?

I saw this and almost bid myself but I really want the early caged version , lucky you its not the version I want but I'm still a bit jealous .