RC10Talk - The Net's Largest Vintage R/C Community

Are those speakers or fans above that one case. Just curious. They look cool. Look like A/C to me. Thanks for sharing Prof , that kind of workshop is like my dream come true , think most of us must have at least one of his products. :D Looking at the third picture you can see the raw billets of alu...

I actually ended up running 4 4000mah 2s lipo's through the gearbox , about an hour and ten minutes , the last half hour with a pretty pokey motor and I've just pulled the box apart . IMG_20220408_154921_947.jpg IMG_20220408_155448_723.jpg IMG_20220408_155543_731.jpg IMG_20220408_160826_668.jpg IMG_...

Not the greatest looking designed bumper , not your fault but if it were for my personal use I'd design something more angled up at the front .

What if in 1987 Yokomo had given the old dog another chance ?
Teaser pictures ....

W as confused by toric joints , had to look it up , better described in English as "O" rings , no way a criticism of your English as it's very good, just an easier search name for them .

I've added loads of colours to my Shapeways stuff , don't think any radical colours have been ordered yet .

Not often this easy , that Super Shop is the Gibbons Goolies
Would have entered myself but I'm waiting on a single decal

New front bulkhead for 10mm longer bottom arms .

They're both from a long time ago ......in a childhood far far away

The picture of you holding the motor plate up to the screen is very familiar . With flat objects you could put them in the scanner of a regular paper printer with the graph paper , then import the scan into Fusion , scale the picture and use it as a template . The motor plate I made up for my second...

Front bulkhead and arms , the hub carrier I've made 5mm wider to make it more stable , the stock one is only 10mm wide where the pins link to the arms and if you have an adjustable camber upper arm it needs more stability . IMG_20220412_104931_922.jpg IMG_20220412_105031_163.jpg IMG_20220412_105255_...

Thanks Jeff that's what I thought , came to the same conclusion too about keeping the chassis flat and tilting the mounting , this is what I have so far , kind of hard to get a clear idea from screen captures , even if your familiar with the 834b then this is going to look strange anyway as its so f...

I'd also recommend rehydrating all the nylon parts , give them a clean then stick them in a bucket of water for a couple of days , don't boil them , nylon should have a water content to remain supple and when it dries out it becomes brittle , simply soaking in water for a day or two restores the wat...

Brian, could you grab me a dirty thirty while you're in there please?? :D Dirty thirty...? In my parts, we had a strip...my bad, "gentlemens club" right up the road which was on US route 30 and IL-251. It's unofficial name was Dirty Thirty.... thank the good Lord you're not talking about ...