RC10Talk - The Net's Largest Vintage R/C Community

If anyone knows me, I am a huge Tamiya King Cab and Tyco Bandit fanatic. I really love the yellow King Cab that was featured in the 1990 Radio Control Car Action Magazine, so this is just a little tribute truck I created with a Bandit. Im really proud how they turned out and are now a part of the co...

The brackets for the front lower shock mounts worked out well. For the upper brace, I modified the ends to have hex pockets for the shock stud nuts. Both solved the front end build problems and the front suspension moves in a normal, predictable manner. The steering throw with the bigger servo saver...

It's a much improved runner and a satisfying basher. The steering is good, the wheelies are not overpowering and have sort of turned into a sprinter/chock style launch, and overall it's a lot more stable. I think it's pretty much done, at least until some way to better control the gearbox pivot come...

Dadio wrote: ↑Mon Mar 04, 2024 1:25 am You could always split it , make a two piece mould .

Yes, the plan is even for more parts, as the recess in at the bottom of the body will require to remove central part before the side pods...

The build is here: https://www.rc10talk.com/viewtopic.php?t=47780 My RC10B1.5 Black Fiberglass 5 Link Titanium PDI Zeta Pro Micro programmable ESC Novak Mercury FM shielded receiver Futaba S9452 steering servo Reedy Modified motor Cobra Little Pee Pee runaway stopper Race Prep tires Factory Works ch...

I did some splits and tried to make them in the smartest possible way considering what I'm trying to acheive... The side pods requires to be removed at the end, so they will be separated at the seam line between the main body and the side pods, making the split less visible in the vacformed body (ho...

I modified some bits of the moulds - removing some useless material, and making sure we can print this sitting on a flat face while ensuring nice finish all along the areas in contact with the vacformed sheet... https://i.imgur.com/DYvfIkg.jpeg https://i.imgur.com/DvrBDa5.jpeg Some supports will be ...

my dude. diogee dog.

little f'r HATES rc cars. if he so much as hears a servo or esc chime up its go time.

I found a new 19D a few years ago, then this 19S popped up last week. These early 1990’s motors with ceramic shafts are really cool.

Not a replica just spare parts thrown together, just put shocks on it for the first time.

Started into a Bullet refresh this weekend. Original plan was to go all out, and get the best of everything, but found out most of the parts I had (from two parts cars) cleaned up pretty well, so just decided to refresh it, and only replace what was really needed. As I found on my Slegehammer, Traxx...

Worked out a 4 part chassis, or 3 parts considering the last one is an addon... https://i.imgur.com/xuwbgyJ.jpeg And that should print on one single plate in 8 hours on my X1C (PLA - it would be longer with PETG or ABS)... https://i.imgur.com/Fii33EB.jpeg The way I broke down the chassis was basical...

She is mechanically complete. The body is a few days out, and then I need to figure out the plan with the roll cage. I almost don't want to do anything with the body and leave it as-is, because let's be honest, its not the best looking body out there. The only new parts used on this car are: shock t...

Making friends with the neighbors pupper.

Our doberman is getting big but she tries to still curl up in a little ball and sleep on top of the pillow