RC10Talk - The Net's Largest Vintage R/C Community

Step 1: Chassis Design.

I use RIT dye. They have one specific to synthetics that I use and reuse.

If the stealth holes are drilled and countersunk properly, there's no way to know what it started as. Especially if they countersunk the motor guard holes too.

I built this RC 10 in the early 90’s while I was working at RC Car Action mag. Dig it out the other day. Had Tekin 410k esc. Carbon fiber tub chassis. Anodized old style shock bodies from Associated. Reedy motor. Did an article about it but don’t have the issues around.

Just got inspired by some threads on the Tekin conversion to post an old build. As per usual I had collected parts for a long time and wanted to build a mid motor conversion for vintage racing on modern carpet tracks. In 2014 I was ready to assemble a car for the Nordic Vintage Challenge. Ended up d...

An old scratched up golden nose plate was stripped and sanded for a good finish and kick-up adjusted to 25 degrees. Then a coat of black and the SACS mounted.

Ok, from the active caster provided by Schumacher at the front end we continue to the active camber at the rear... Overhauled a black case stealth and flipped the top shaft the right way for the mid motor configuration and mounted it to the Tekin motor plate from the kit. On this build I've used the...

Thank you for all the info and taking the time to explain it to me Joseph. I'm not 100% set on having him use the vintage one, but I have several, probably 6-8 rollers I got over the years when I saw a good deal. I have lots of back up parts as well. I was looking it as a project we could work on to...

I am officially an RC10 owner. What better first car than this beauty. I just received. Vintage Team Associated RC10 Gold Pan RPM ULTRA MOLD. Has stealth transmission and Losi HydroDrive. Period correct tekin ESC and unknown brushed motor. MIP CVD axles, minimal to no wear on the drive cups. ball be...

Hi there ....
I am a New member from germany, building a New RC10 with JC suspension parts.
Got a New tub, stealth is like New.
Run the donation car at the last Euro Masters in GB together with Mr Drescher in the A Main ....
Looking forward to a Clay race in July with the car.

Schumacher Viscous Drive. Been hunting one for awhile. It's like a Losi Hydra drive, but cooler because its aluminum. I'm probably going to install it on a Losi or RC10.

The wait is over introducing Nostalgic RC’s second line of Carbon Fiber Slipper pads. These pair of pads are for the extremely popular B4/T4/GT2/SC10 and SC10RS variants from Team Associated. Grab a set and never worry about the slipper again 💪🏻 $15.00 (1 pair) plus shipping Email to: Nostalgicrc@gm...

Traxxas TRX1 Modern Racer

Build thread - https://www.rc10talk.com/viewtopic.php?f=31&t=47896

Shaggys pleased as punch with his new ride .