RC10Talk - The Net's Largest Vintage R/C Community

These won't look rare but they are...1 of 2 sets of test arms for a RC10T. They were made with a special blend of RPM and fiber filled nylons to see if they could hold up and still be covered under the RPM warranty. They did but never went into production...I have one NOS set and one set on my Ultra...

JosephS wrote: ↑Mon Oct 23, 2023 2:34 pm I have not seen:
NIP RPM ultramolded Buggy.

Here you go. I had another new one missing the header card.

Yeah, glass filled is always stiffer...wasn't a big noticeable difference in use though...

That's a great idea! I hadn't even thought of drilling and tapping new holes offset from the original location. I already have an M3 tap too, so my net cost would be ZERO! Probably the best and least expensive solution. I think I'll try this and report back when done.

JosephS wrote: ↑Mon Oct 23, 2023 2:34 pm I have not seen:
Early Edinger e-clip secured outdrive pivot.

Here you go.

You can change the crystal within the module. These would not be narrow band

Manual...
http://manuals.hobbico.com/fut/3pg-manual.pdf

And she's done.

I'm happy with the results.

Didn't realize there existed this type of RC racing. I know I would totally be the person to trip over all the course barriers.

https://youtu.be/dYrvvkbrrwI?si=6fGmr32cR-ENB1DE

The 6570 (og) and 6569 (rere) are 26t
Pretty sure those 9360 for B2 and newer are 28t

They said none of the clear parts will be sold separately, I hope they make enough of the metal parts and such to keep us happy for another year or so

I guess that means we might see some silver anno chassis/nose/motor plates pop up before long now too.

So finally got some time to try and repair my son's Team Orion brushless motor with the stripped mounting holes. I took some pictures this time! So it turns out that two of the four provided mounting holes are stripped, and they are next to each other, so can't just turn the motor 90 degrees and use...

For sure ordered one. I over paid on the Worlds ReRe and RC10 ReRe and wasn't going to miss out on this one.

I hope they do another re-release for 2024 for the anniversary which would be sweet.

Finally a paint job I can do myself
- limestang