RC10Talk - The Net's Largest Vintage R/C Community

Getting it mocked up...tough build...1000 measurements ...maybe more...no joke

This morning.

Alternate angle of the morning run.

After work, put some electronics in my newly acquired B4.

Hitec Shredder receiver, Yokomo SCR-BR esc, and an Flight Test servo. I don't have many extra Reedy motors, so I used a Trinity Speed Gems Pro (15X2).

A really nice time capsule came my way. All it needs is a good cleaning and a body. The original owner seems to have taken really good care of it. I'm not sure if I'll go painted or clear with the body.
.

The Frankentruck lost its body to one of the EGTs. But it got an upgrade. The replacement was from a shelfer GT, but didn't quite work with the T3 rear shock tower. After a little trimming and the addition of a pair of carbon fiber RC10B4 hub towers for the shock attachment points, the body now fits...

Was digging through a junk box and found an old Wii power supply that had it's cord chewed up. I noticed that it had enough output to be usable. Screenshot_20230704_155051_Gallery.jpg So I fixed the cord and fitted it to a Traxxas RTR charger. Screenshot_20230704_155115_Gallery.jpg While it isn't an...

Got a sweet batch of motors from a factory backed dirt oval racer! All the bagged motors were factory rebuilt in 1990, ready to race.
.

And here it is, with all its siblings.

Updated for 2025, this directory includes every hobby level R/C shop currently open for business that I could find in the United States and has grown to include over 700 brick and mortar stores nationwide. There are a few tracks on the list as some areas only hobby shop is connected to a track, but ...

It's funny how after all that work, it looks like I did nothing at all... Forest for the trees... :lol: Noticeable difference in appearance without looking like a whole new theme. Most importantly... the site and pages loads a LOT faster than before. I give it two thumbs up! I kept thinking of the ...

I just spent another countless amount of hours finishing everything up. So It's officially 100% done... for now.

Managed to fit one of those $20 Injora transmissions on a RC10 (going to be a truck). I had to clearance the gear cover a little, to allow more upward movement of the half-shafts. Screenshot_20230801_192132_Gallery.jpg The half-shafts came off a ECX Torment and the carriers are from a Traxxas Stamp...

This project started with a new partially assembled RC10B4. This could be the stealthiest RC10 of all time. Except for the shocks, this is as blacked out as a buggy can be! I came across blue anodized suspension arms for the B4 (not sure who the maker was) and was intrigued by the idea of adding som...

LowClassCC wrote: ↑Tue Aug 15, 2023 4:09 pm Working on building a 1/32 scale short course truck. Here is one of the screws that it is assembled with.

20230815_152701.jpg

That is a short, coarse, screw.