RC10Talk - The Net's Largest Vintage R/C Community

Dadio knocked it out the park! Much Appreciated Gavin!

That is an amazing Yokomo! If it’s a runner, post some race footage!

i'm quite curious to see how the sprocket is actually working in real, and how long it last... I'm saying this as I've been quite disappointed with my Nylon idle gears... Any thought about printing the sprocket part in SLM and design part around to be printed in Nylon? I've had way more luck with s...

The circled ones are the Pro printed option .

Yep since the motor is flipped the polarity is reversed. Not a problem on a modified motor but a timed super stock type motor would be unhappy. Usually you flip the top shaft and cut the motor plate, if you can't flip polarity.

Very cool build. Years ago, I got lucky and scored a Lucas Agitator Pro-10 on eBay, it's a really cool chassis for sure.

Never what you want to see
Luckily no damages

Came home to find Cali passed out in front of a Lassie marathon.

Supplies! 20240131_182053.jpg I'm going to redo the motor plate touchup. The paint pen I used is a bit too flat. I'll experiment with the epoxy to fill in the stealth holes on the chassis if I can get the color dark enough while mixing. I think these are the correct towers. 20240131_182435.jpg And s...

Your chassis looks to be the last version. You could build it short or long front arm.
https://rc10talk.com/viewtopic.php?t=47447
That would also decide which towers and spring cups you would use.

coxbros1 wrote: ↑Wed Jan 31, 2024 8:43 pm Both great!....but that 's that belt in every way imaginable!

I've never been "this guy"! But this thread is 9 years old....

....But this build is timelessy bangin'.

Testing has begun... (Enter Shang Tsung here)

Purdy Tami Mountaineer body showed up. Hope to have this thing doused in Easy Off in the next couple of days. Also got in a set of Blackfoot tires, which until last week, I did not realize, were the same as the 2nd gen 3speed (Bruiser / Mountaineer) tires, although a Blackfoot and a Bruiser are with...

27mhz transmitter, receiver and xtals for the Blue Eagle LS. And gear cover and front arms for another Blue Eagle.

Huge investigation 🔎 was implemented to find out why it turned...not sure if the AVC turned the wheels or not...but regardless it's getting removed....the main reason is to why it turned into the wall: The downforce at the rear was so extreme it pressed the rear of the car and collapsed the rear sp...