RC10Talk - The Net's Largest Vintage R/C Community

Tamiya F104 tires are an option for stock wheels and handle darn good you also want 2° camber front and rear 🤙🏻 https://www.rc10talk.com/download/file.php?id=176803&t=1 That's a great option with the F104 slicks, looks exactly right. They look like they would fit a lot easier in aftermarket bod...

Oh yes. Plink and blue go very well together

https://www.associatedelectrics.com/teamassociated/cars_and_trucks/RC10DS/Classic_Kit/parts_accessories/

We're getting DS tires soon (late August), listed at $30 for both front and rear! Arms and dogbones are available now.

Gotta love those (8) shock O-rings for $6!



But kinding aside, I do appreciate when AE actually puts part support out there for their ReRes!

2s is your voltage basically, a 2s is 7.4v (rated, 8.4 or so fully charged). The C rating is how fast it can discharge. Not really a consideration for the speed control. It's a consideration for the motor choice. Think of it as larger fuel line- if you are running an engine that doesn't need all tha...

KidAgain wrote: ↑Tue Aug 27, 2024 1:01 pm Great write up bud appreciate all the work you're putting in.

You should try the Tamiya F104 belted slicks one day see how you like them.

It's on the list! Might see if there's any at the lhs this weekend.

just a heads up, i have literally thousands of those 8-32 posts and nuts in the old school fluorescent yellow- if anyone is making a purchase on the website just leave a note for how many you need and ill add them to the order for free- so long as its a realistic quantity lol. I have plenty of 4-40 ...

While the ground clearance is less with the foam wheels, the foam wheels fit better in the stock wells, of an HPI 256mm wb. The body is propped up and hovering over the chassis, if the front wheels didn't clear the wells, the body would be thrown off at this point. EOGU5uww10E The rear wheel wells m...

I had to revise this conversion because I was writing it out in order that I was doing it, but half way through, realized I needed to build it backwards, so I wanted a build thread that more accurately shows my method for going about this conversion. It will probably still be a bit choppy, and there...

Next is the bellcrank and the belt tensioner. For the bellcrank screws, use one of the longer ¾” screws for the right side, and preferably cut the other ¾” screw down a couple of threads or so, or use one of the 5/8” screws. If you use the full ¾”, it will hit the tensioner, but the 5/8” doesn’t get...

Amazing kit

Glad to see the PS-12 Silver and PS-1 White backing toned down the PS-20 Flo Red, gives it that orange color on the boxart. https://i.imgur.com/aFEuMj1.jpg https://i.imgur.com/Jutx7eY.jpg https://i.imgur.com/CjDRWVf.jpg https://i.imgur.com/Pcygr52.jpg https://i.imgur.com/nTY6oVw.jpg https://i.imgur....

Grendel has eyes now. Here's lookin' at you kid!

Guessing you guys checked after they were listed, but before stock was actually released / added.... I just checked now, and they are in stock.

https://60years.associatedelectrics.com/rc10ds-tires-front-and-rear/

You're welcome