RC10Talk - The Net's Largest Vintage R/C Community

This is a custom chain drive Tamiya Frog. Be sure to zoom in on the pics to see all the details. It has an ultra tall gear ratio with this setup. The B&R that was originally chosen for the build just didn't have enough torque, so in went a Lemans 550 360ST unit. It worked perfect. It is not just...

Run down of build 40th kit OG CE Stealth Transmission OG CE long arms and shocks rebuilt Rere team universals joints Factory Works carbon towers, battery holder and trans brace Fan Rc titanium turn buckles Team Losi Ball cups Fan Rc Worlds steering bell cranks Original AE front and rear sway bars up...

Here is my "ugly runner"....It started as an Associated T3 stadium truck. The chassis, rear shock tower, bumper and braces are all G-10 fiberglass, hand-cut on a scroll saw...Dimensions have been stretched to short course specs. The bulkhead is actually a servo mount from Exotek, and steer...

Behold a build most Grotesque. https://www.rc10talk.com/viewtopic.php?p=581151#p581151 Screenshot 2025-03-09 195431.jpg IMG_20250308_002002083_HDR.jpg IMG_20250308_002113666_HDR.jpg The more you look at it the worst it gets. most of the parts are bent and tweaked. Rusty and/or stripped hardware. Hin...

Ok, so this is the car that has the misfortune to be owned, and even worse driven by me ;-) My “transponder-carrier” B6.X started as a B6.1, but received a few updates like: - B6.2 rear suspension, mainly due to parts availability - B7 KPI mod up front, not 100% on it yet. But for now it gets to sta...

My builds are quite involving, and they are taking time : on this one it reached another level. Not a single original part was used. Lot of 3D prints and home made parts, some replacemnt parts widely available, and we have a *not* Zerda, and it took about 2 years and a half to get there between the ...

Time warp graphite, looks like it was used a couple times and put away. It's all original and all I did was clean it up.

Recently I replaced a few antennas for old Futaba radios. Never throwing out old parts, I stashed the broken antennas. I also saved several Tamiya connectors with mostly cut wires and the terminal still locked in the connector. I can get the terminals out but it always a PITA. Never bought a tool sp...

Fine Design Manufacturing Top Fuel Truck I restored a few years ago, uses AE 12i rear pod powered by a Reedy 510r and Novak 4.5L Velociti topped off with an Andy’s painted Parma Chevy.

https://www.rc10talk.com/viewtopic.php?t=44554

Tamiya super blackfoot, nick-named: Junkyard Dog. Had this baby since it was new in the box. Its been through hell and back, and then through hell again. Every thing is original except for the random assortment of screws used for repairs. The body has been repaired so many times it's worthy of the n...

RC10 quadra symetric clay racer. JC Racing 2.6 gearbox w/V2 slipper and B6.4 gear diff 3D printed quadra suspension by Nikki(NIX Concepts) RB10 12mm shocks Factory Works Carbon Fiber bits B6.4 front hubs and carriers B6 wing mount and 7 inch wing B6 ball studs, cups a Yeah Racing Ti turnbuckles Cust...

Ready to upload new pics with some blah blah. But it's not very spectacular. So I want to resign of entering if an 11th entry want to come in. After 3 days of no one coming in, i'm getting out now. As announced, not worth a 3rd photo and not as bad as my january build of the month, but feel invited ...

Yokomo MX4 still with its first 1998 airbrushed shell, KoPropo EX1 Mars radio, PS-2004 FET servo, Novak Cyclone, Reedy Fury and Keil V+ pushed 2000s. Take a look at the battery. The shrink tubing on one cell is mounted upside down. Funfact: the battery box also shows it the wrong way round (compare ...

Got a package from DHawk an aluminum losi front bulkhead for one of my JRXs and some hardcoated aluminum stealth gears for the FR01 Quality looks good and they got here a lot faster than I expected.

Along with the Jrxt body that I rescued from my folks' house, a Jrx Pro body returned home. The original chassis was given to another family member, so I'll have to build up a new chassis to sit under the body. I've had this basket case, mismatched buggy in storage for many years. Much like the Jrx2...