RC10Talk - The Net's Largest Vintage R/C Community

Well I think I am done with the rough shape of the chassis although I do need to do the upper brace. I finished them in both styles, Junior and Pro :) Printing will be a bit tedious with them as they do tend to be large, it is probably best strength to print them laying on their side but easier to p...

Got a test chassis printed, I need to adjust the spacing of the holes in the tail a bit but wont be able to do that until next week due to poor internet access.

https://www.ebay.com/itm/275354620434?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=xj2lzGJlRzS&sssrc=2349624&ssuid=LuWSqPl1SAW&var=&widget_ver=artemis&media=COPY

Esc.

If I'm not mistaken, original Mini T springs are even longer.

RCveteran wrote: ↑Mon Jun 20, 2022 11:45 pm Always something making like difficult Thanks. Guess I'll be adding a 4-40 wrench to my metric traveling tool kit.

If you don't need deep well, a common bit driver works.

While working on sizing and carefully placing holes in the chassis file I just did this up quickly.. It is going to be a pain to print.. if anyone does post a picture lol This one is likely going to need to be printed on it's side if you want any chance of it not breaking the first time you hit some...

Looks good on draft print quality.

Another pic.

Looks great, almost makes me want to learn 3d printing.

Hot off the printer, heavily modified Kingroon with all the fixins

I usually dont cheat with a raft but I knew I was gonna be away for most of its print and didn’t want one to cause them all to fail

Oh, and I finally sorted the body mount/post for my A&L towers too.

Pack of 100 white nylon with the flange just like OG
https://www.mcmaster.com/#94909A005

Changed orientation. Much less flex/much stronger.

Update! My chassis design has been updated, there has been a thorough tweaking of the model to more correctly represent the size difference of the Molded and Jrx2 chassis. If you grabbed it before grab a new one! I will do up a chassis brace soon. I also have more parts in the mail so will be able t...

Nice thread idea. :D I'll throw in the SG Racing (Tag Racing ) Coyote for being the first for two things. Firstly saddle pack battery's in a buggy, and secondly the first centre line transmission 4wd with just a spur on the centre prop shaft and two bevel geared diffs. Pretty sure it's the first and...