RC10Talk - The Net's Largest Vintage R/C Community

Got a nice haul of Aussie Dirt & Track magazines in the mail.... a local deal, and pretty good price as well. 26 of the first 29 issues... some rare awesomeness here! DandT.jpg Issue 26 is going to a good mate to complete his D&T collection, and the rest..... who knows? Maybe I'll just read ...

I had always assumed AE just copied Composite Craft's bellcrank design and modified the post to be on top instead of the bottom for the 6037 Worlds Car. However I never knew it was primarily due to Kinwald using the CC bellcranks at the 1993 IFMAR Worlds. I'm still not sure why the front Wide-Fives ...

Electronics have been selected.

• Big Jim mod is a '94 Kinwald teardown that is new but no packaging

• Tekin G12 esc ('94)

• Tekin TFM 75MHz Rx ('92)

• Orion V-Max 1700 SCRC cells ('94)

• Futaba 9101 coreless ball bearing servo ('90?)

One of these

Built a Vanning. Still need to source an engine and radio box cover. The rest is all new from an unfinished kit.

I made the three hour trip today and picked up this rc10 from the guy, real nice guy, knew it's history, everything. I'm kinda speechless right now lol, I'll have to make a separate post about all of this, I'm just in shock right now that I own an original rc10 after all these years of them slipping...

Brings back memories.

Looking back from the backseat of a Amphicar.

THEYTOOKMYTHUMB wrote: ↑Sun Oct 15, 2023 4:26 pm Brings back memories.

Fixed it for you

Price estimate £499 ≈ $600.
ETA December 31.

The esc and rx are mounted on the chassis, and I have the wires where I want them. I decided to go ahead and work on mounting the body. It's a scoop-less RCPS Turbo Mirage painted by Perry @ SRS Raceway in Scottsdale, AZ back in '93/94. The sharpie around the windows is original and I will not be fi...

So after 10 months of gathering parts I am finally ready to start this build.
I will post my parts list in the first post.

Started putting together a long shock vintage runner for a friend of mine

Cut and trimmed a TBG Pro-Line Vision body.

Paint job is awesome !! Perfect ! Thanks. It's definitely a period correct paint job, and the scheme is really eye-catching. I decided to solder up the electronics last night. I swapped the smaller 13 ga positive wire for a 12 ga since I would have hard wired the battery lead to the single run inst...