RC10Talk - The Net's Largest Vintage R/C Community

Kranzel's Terminator 2wd oval car?

Success finally! https://i.imgur.com/43XUJts.gif Laying the motors on their back is how it was supposed to be done. https://i.imgur.com/5pEEqSg.jpg So much less support material to remove, once it is oriented correctly. https://i.imgur.com/POrkiDu.jpg https://i.imgur.com/Zi0URZA.jpg https://i.imgur....

Alright chassis is together! PXL_20241008_124310872_C46nFyGI9L.jpeg PXL_20241008_124331431_2X3eGqbF2O.jpeg First white part is a silly one, but I dig it! Rear hub spacer. It was black in my later B2 kit back in the day. PXL_20241008_124351830_14L3qcwv01.jpeg Time to build the best shocks in the indu...

Orange and purple stuff. 8) Novak.jpg Novak ESC with cans. Not enough orange! ESC.jpg All this wiring for damn brushless? Motor.jpg Front width with the DT02 wheels is around 254mm. I have some BMAX2 wheels that take a 5x10mm bearing that I'll try. Rear width is 245mm with the Yokomo setup. Seeing o...

Team Associated RC10T ready for some future Vintage Racing 🤙🏻 Specs: RC10CC chassis and motor plate Factory Works shock towers Andy Jacobson #3033 Truck body PRO TUNE MOTOR MOTIV RC 13.5/17.5 R1 Wurks Blinky Super Stock ESC MOTIV RC 6400 battery Team Tekin Racing T-180 servo Factory Works A&L st...

Been getting progress done on a buddy's Team car he's had since about '91-'92. Old plastic servo saver just shat the bed and made for a good stopping point I suppose. Unfortunately, his 30+ year old Topaz is alotta bit weak and only turns around 24k rpm at 7.2 volts after being cleaned up nice with ...

I must keep running into post picture limits. Just needed a few more to wrap up today's progress. For the tires, I have to thank jcwrks for trading me for the correct fronts. Rears will prove to be a bit more challenging, but until I can track down the Flat Stubbies, a set of XTR Pro-82's will take ...

Alright, everyone, this is it. Woke up this morning motivated to get the body done. This is a body I had on another car, so it isn't perfect, but the paint was close enough to the box art/Matt Francis design, that It was worth putting on this ride. I removed the stickers that weren't correct, and be...

Pagoda

Morning rain at the Indianapolis Motor Speedway.

Amain was (is?) closing out some toy grade stuff, took a gamble on them since they didn't have much for pics or reviews. This entire lot was under $100, and while shipping wasn't free I did make another purchase that qualified so the entire lot shipped for free. Pretty impressed with the quality for...

Watching clips from RAD

Some of the basics showing up. Wheels, tires, shock towers. . 1000015506.jpg . Actually, I think I prefer these rear wheels. The TQ-22 tires were previously glued to 1 piece wheels but came off with relatively little dried glue left on the tires. I might have to put some 3 piece front wheels on too....

Anyone see this?

MIP trailing arms and a set of Andy's arms.