RC10Talk - The Net's Largest Vintage R/C Community

I came across the following site a few years ago when I got into trying to protect some bare steel sprockets. Maybe it can help you or anyone else here:

COMPREHENSIVE CORROSION TEST: 46 PRODUCTS COMPARED
https://dayattherange.com/?page_id=3667

Schumacher is bringing back the Cougar. This is great news as I’m probably not the only one thinking they had given up on vintage.

https://www.liverc.com/news/schumacher-cougar-classic-release/

And finally got the front Kyosho tires for a future Assault build, and as expected, they fit great for RC-10B1s also. So, if you are building a slightly incorrect B1 runner and just want good functional tires, Kyosho is currently making them for about $25-30 for a full set. The opposite side of the ...

MarkyDents wrote: ↑Sat Jun 11, 2022 2:24 pm And finally I feel better about the front springs
6D49A9C2-ACF9-4E32-B8C9-76656B8FE024.jpeg

10T silver fronts are pretty close, especially if you use the early spring cups and later style upper locators. That is what I used on my Graphite with 1.02 fronts.

The trans is this one is the 2.65 ratio. Supposed to be for a truck, but all the new buggies are doin' it so I don't feel bad.

It doesn't fit in a rpm world's buggy unless you do some serious trimming to fit around the arm mounts

Already on it
First step is to see what they have done. The front tower is almost exactly scaled. The rear is tweaked quite a bit. But yes, for sure. I have a set of long shocks coming just for this occasion

A bit late about this... Due to the fact I wanted to use white as background on the bodyshell, I decided to use liquid mask https://i.imgur.com/tKWUSOM.jpg I have 2 hobby knifes designed to be used with the index, I will try those for this (my wife had those for scrapbooking, found the idea being go...

Getting back around to this and added the brushed system and RX; Futaba R203GF receiver, Novak GTS esc & Reedy Ti 12x2 brushed motor. It'll be dressed with the T4 RS pre-painted body, shown here, until the T4.1 FT body gets painted and decaled. Haven't ran it yet besides on the stand to verify s...

Decided to go brushed modified like an old school racer...

Factory Works Pro front shock tower with long shocks & springs. Looks great! https://i.postimg.cc/wBWgSqCz/CC64-E8-BD-B434-43-AA-BA42-0748369-FA419.jpg https://i.postimg.cc/jjqRgwkv/E8364296-31-E2-4838-8-CDF-185-B2-AFFD467.jpg https://i.postimg.cc/QdJXJkSH/BF0-D8-BD0-FB43-42-CF-BE58-1-CD50-BA737...

If you can find them losi made some open end bell motors for the mini lst which he showed above. They are not the best quality as I have had one have the wiring explode.. But the Team Losi Insane 370 looks good and came in a two pack

Trinity made some as well. There are a few on ebay.

Well I think I am done with the rough shape of the chassis although I do need to do the upper brace. I finished them in both styles, Junior and Pro :) Printing will be a bit tedious with them as they do tend to be large, it is probably best strength to print them laying on their side but easier to p...

62DF7F1A-09CD-43FF-9C54-D12AD842027B.jpeg After getting the chassis finished I’m now looking at making some parts with kydex. I hadn’t used it before so I took a stab at a t2 motor guard. I did not realize that it was moldable at temperatures low enough to hold and bend by hand. It shrinks a bit wh...