RC10Talk - The Net's Largest Vintage R/C Community

Tear down done....time to start cleaning!

This will be a buggy, built mostly with Blitzer Beetle parts. More or less, a Bear Hawk. For this car, I'm using as many new parts as possible. So far, the only used parts are the red carriers and servo mounts (already had them). The electronics will be mostly vintage but in good condition. As with ...

2.5 year update.

Getting it prepped for the Vonats. Still have to glue up the tires I'll actually use and swap in the Reedy S+ 17.5. Number plates are in the works too.

Do the 1/16 traxxas vehicles have a differential available for the center trans? If not the pinion setup is probably just as viable.

Ok I see they do have a center diff available, I just ordered a cheap trans from ebay we will see. I am still open to other options as well

I very much like how you’ve worked around not making additional holes in the chassis 8) I am so far good on not drilling any holes in this chassis, and I am also hoping to not countersink any holes that aren't countersunk from the factory. I am also going to try for making all the printed parts mat...

Ugh grass is also super tough on parts, lots of drag.

If you can't get it to survive consistently, then yes you are probably trying to push too much torque through a high load surface(grass) so something would need to be adjusted. Run on different surface or keep cranking the power down.

Very cool. Those shock towers are also CC, and I like the Touch of Class integrated into the rear for the motor connector.

Have all sorts of chassis and no idea what they went to. The guy was into dirt oval and it's sadly something I never ran except with converted Losi stadium trucks or buggies
Any ideas on these? I greatly appreciate all the help!

Have all sorts of chassis and no idea what they went to. The guy was into dirt oval and it's sadly something I never ran except with converted Losi stadium trucks or buggies :P Any ideas on these? I greatly appreciate all the help! L to R: Composite Craft RC10 oval Composite Craft RC10T ovaL Trinit...

Well the mini revo center trans is a no go, OD is only 1mm smaller from 20 to 19... still too big. I might look into the micro cars or just make a trans case that doesnt look right... or make a trans without a diff whee

Been a GM guy my entire existence up until a couple years ago when we started to get Fords for the family truckster… And now I’ve picked up one for myself. I think that you'll be happy. Generally, the fit and finish on Ford trucks is a step above the rest. Not saying that anyone else makes poor tru...

Found a couple pics of the ol '89 notchback. Wish I never let this one go.

That's a Dahm good possibility.

What if you designed a small Asian city with RC in mind? It might look like Seo-Gu Incheon metropolitan city in South Korea. A bunch of enthusiasts came together and pushed for the city to include on-road and off-road tracks into the spaces beneath bridges. It's all FREE from 6am to 8pm (when lights...

After huge help from Bob @ Stick It 1 Racing, I was able to finish off this incredible build. Enjoy!