RC10Talk - The Net's Largest Vintage R/C Community

"....no plans to be a Losi collector........"

...........yet.

Diggin' the scheme on that JRX2!

My Mid-motor B1, B4, B6 V2. Lots of trial and error, but in the end a very satisfying build. Off and on about 10 months to complete. At the time my lengthiest build by far. A full build thread is here for the whole story https://www.rc10talk.com/viewtopic.php?f=35&t=45187 mm52.JPG mm61.JPG Chuck

Losi XXXT CR

The heavy hitters are up top, but I'll throw some fodder in. ECX Torment, bought as a slider. Mods limited to AE Rival MT10 big bore shocks, RPM bellcranks, Hot Racing aluminum steering blocks, and steering turnbuckles. Avid S/C wheels. Schumacher front tires and JConcepts rears. Electronics: Futaba...

Not an expert on this subject at all, but an ESC that I was introduced to recently is definitely my favorite so far, simply for its programmability. The Zeta Micro. Via a dipswitch programmer, the following can be set or adjusted: Trigger Start Position, Trigger Full Position, Trigger Start Brake Po...

Ok I have almost all parts needed to build my Kinwald worlds rc10 now minus correct rear wheels and 1/4 inch MIP cvds.

Put this together recently, thought some of you might like it. I love the grasshopper, but it needs a little help. A friend developed some conversion parts for grasshopper 2. I decided to adapt them for the original. Plan was to build something that will handle well and cope with 13.5t brushless hap...

Got a couple packages today. One was an A stamp that someone had converted to a truck with B2 front arms. Other than the bellcranks and some scratches on the bottom, it's in fairly decent condition. Screenshot_20230120_204210_Gallery.jpg Got two Magnum Sport transmitters, one with a manual. Screensh...

It didn't come in the post per se, but I got my original Top Cat back. :D It is pretty rough and has gained a few speed holes in the chassis in the 28 or so years since I saw it last. I will rebuild it and run it, preserving what I can. I have a boat load of re-re TC and Cougar parts for that which ...

In addition to selling my Top Cat back to me for the very reasonable price of $0.00 (that is the equivalent to 0 pounds for you Englishmen) :lol: , my buddy threw in a lightly used Storm 2000. From what I can tell, the front end was just removed to get the servo out, presumably to go in another car....

Well, Project Fantom 20 Exp 3P is finished, lots of work on the body, but the results are quite amazing, one of my favorite cars

Not today, but this past weekend. Freshened up six Speed Gem Pro motors, two of each. The other three doubles went to Frankentruck for being such a helpful & generous guy.

I have shared some photos of this in another thread years ago, but since then I've done more work to it. This is my RC10GT blue chassis I bought new like 20 years ago. I converted it to a mid-motor, transverse battery electric https://i.imgur.com/Iligzsw.jpg The motor bolts to a 1-piece transmission...

It wasn't today, but last Wednesday I ran my first organized RC car race since ~1996. :D It was a carpet oval race. I broke my KF2 in practice, so I slapped a set of slicks on my re-re Top Cat. :shock: I ran novice class against a few "street stock" Slashes (basically LCG chassis, RPM hop ...