RC10Talk - The Net's Largest Vintage R/C Community

coxbros1 wrote: ↑Sun Feb 12, 2023 10:38 pm Will u be printing a roll bar for Big Bear?

The body set and accessories for the Big Bear are not my designs: they are available on thingiverse and cults3d... I've only used the files to display them on the chassis...

Hi, can you send the files for the big bear tire mold to Neal at MCI? He will make the tires, I am sending him one brand new wheel right now, he either needs a perfect tire or this 3d file. Let me know and thank you. You may tell MCI to contact me if he has any interest on this. So far, I've shared...

If you are hiring out the printing, you will need to print a gauge and see where it ends up. My attempt to use shapeways to print was around 5% out of spec instead of the .4-.5% they list but only on the holes, not the other measurements :roll: When I inquired they told me it was due to the process...

I've looked out for information on injection mold costs... All depends the material you want to inject, and the quantity you want to get from the mould... But in short, for small quantities, Formlabs advertise some high temp resin (glass filled) able to work out 10 to 1000 depending upon the injecti...

Welcome here from another french guy

Well, I had a look as well in the past... So far, beside the IDEX solution, if you want to print multimaterial, there was : - Prusa MMU solution. It requires a a Prusa printer, so it is out of question for me currently. And additionally it works more or less as per all the feedback I saw. - Mosaic P...

I really like when test prints are not the same color than the original parts... It really helps people to sense what we are doing here

It did not took long. I've ordered a Bambu Lab X1 Carbon / AMS combo and a resin printer (Anycubic Photon M3). They have been ordered at the same time while both in stock, and I'm curious about which one will arrive first... I'm thinking now about the way I'll get organized in the area to mitigate a...

The prototype of my Universal Marui Gear (Mod 0.8) set is arrived... Here is the design: https://i.imgur.com/RPYtVMN.jpg https://i.imgur.com/ehgXDL0.jpg It was designed to cope with all 2WD Marui cars, and to get as closed as possible of the standard Mod 0.6 gears ratios. It includes even the motor ...

I did the tests, and there is some good and some bad stuff The Differential is a perfect fit, as expected, it works smooth and insert the axles shows the right clearances, and that on all the tests https://i.imgur.com/Ye8FxvC.jpg On the Hunter/Galaxy, I did the idle gear without test fitting the new...

A stream of deliveries over the last few days... Some elements for my printing ongoing projects arrived today (printer, post processing station, isopropylique acoohol and resin). This was expected with an accurate tracking... But there was a package incoming from Australia as well, which I did not e...

Spend the afternoon at the club with few people interested by CAD. I showed them how to use Fusion 360 and explained them how to model - a simplified touring rim https://i.imgur.com/HRSA8fI.png - a simplified Tamiya TT01 rear hub carrier with 2 degrees angle... https://i.imgur.com/GYu0t2z.png I trie...

I just received a notification indicating the X1C/AMS combo is on the way... I'm super excited (I think i'll check ten times a day the tracking until it arrives )

My wife put the treadmill on sale last week, there was a lot of them on the ad site, I thought it would take a bit of time to sell... She put it at a good price, but not too high. One week after we had few proposal. Honestly, I did not thought it would be out of the place so fast. It's gone, now, an...

Yeah but now that the treadmill is gone where will you hang the laundry!!! :lol: :lol: well, country side advantage is you don't really need a treadmill... Nice people just gave me money for it so it's not needed anymore... Maybe we get another lockdown at some point, but I'm not too woried about t...