RC10Talk - The Net's Largest Vintage R/C Community

THEYTOOKMYTHUMB wrote: ↑Fri Jun 02, 2023 11:49 pm As stated before, I'm not a KISS fan, but I'm not anti-KISS either. I like this song most of the time, which is why I stopped this video about 30 seconds in...

I made it to almost a minute in, before I set fire to my headphones...

RC10resto wrote: ↑Sat Jun 03, 2023 12:46 am Time to right the ship!

Thanks Brian, much appreciated.

First stage complete! The wheels turned out to be the original kit wheels that were brush painted black. The pink was protected by the paint so it’s still super rich and not faded at all! Gave the chassis a quick wipe down and the metal parts a good polish. Also started to take the paint of the wing...

Also, here is a rough overlay to see the similarities. Click on the photo to see animation.

I’m not a big fan of the JRXT 3pc wheels.. Instead, I’m using a new set of orange Junior T 1pc wheels. https://i.postimg.cc/zGJ2LVRm/B6887-F64-FAD2-48-FE-8434-79-C3776-A0-E72.jpg New front stagger rib and rear 10 row spike tires. https://i.postimg.cc/Fsbnsjzg/89-D4-FF1-B-0474-4399-87-D3-A263-E3-A0-D...

coxbros1 wrote: ↑Mon Jun 05, 2023 9:40 pm General Zod!

I've been away for some time. 2023 has been a rough year for me so far. But been getting back into things now to get my mind off daily living and hopefully it takes a positive turn from this point on.

I had seen pictures of the side with the controls but found it hard to believe that's what they actually did , thanks everybody ! I'll see if I can think of another dumb question soon

GoMachV wrote: ↑Thu Jun 15, 2023 1:28 pm This kid is holding it properly

No wonder I struggled with it. It's not designed for all the Southpaws, Mollydookers and Goofy-footers.

I did pursue my tests with the PLA as support interface material for PETG... egoe5wQl8H0 And once the flushing volumes are set properly to avoid material pollution, there is no more adhesion issue within the print. Indeed I just bump a bit the flushing volumes before it goes to the purge tower... An...

Morning walk with my daughter for Father's day.

Hadn't bumped this in a while. Beast chops. Just used the gasser.

She made it over from Norway safely! Thank you @LurkingCAT !

It's true what they say about double dipping , just not hygienic

I took a deep breath, and started cutting into the beautifully sealed parts bags. Starting with the transmission, I had planned to use the Thorp internals. However I am going to stick with the stock gears and dif. I will be using the A&L outdrives and bones, but stock slipper. I noticed the part...

Chris (The "A" in Team A&L) has a bunch of lexan ordered and has been getting the molds ready. It won't be long until we see some new old bodies for the first time in many years. He also has many Losi and Traxxas molds since A&L were the producers of them back in the day. I will tr...