RC10Talk - The Net's Largest Vintage R/C Community

Found a sticker sheet for the RC10 Worlds on ebay not sure if it was from the ReRe or original but it had the graphics I wanted. I made a high res scan of the sheet and also had everything in the converted to vectors so I can modify them and resize etc before printing my own stickers. Below is a pic...

Associated protech

Boki turbo mirage

Got the LED controller today. X4920DVor2k Hot glue to set the LED's in the buckets. https://i.imgur.com/U1IWH7V.jpg https://i.imgur.com/LFxCGco.jpg https://i.imgur.com/50ffNkG.jpg https://i.imgur.com/xtTVJW1.jpg Will get the wires routed and tacked down, and then see about fitting this body on the DS.

This should be on the way here soon, for the RC10 DS, the Factory Works shorty LiPo holder.

I just realized I hadn't shown off the latest two pieces. All new kits are coming with machined nylon bellcranks, and we have optional aluminum caster blocks now as well. With those two parts, we are just left with 2 printed parts on the car. The bulkhead and front gearbox.

Had to strip the car down, refinish chassis(wrong color) and relocate bellcranks...got battery mounts done too....processing nicely....batteries (Sanyo)/Novak esc, Tekin receiver up next

Factory Works shorty holder made it today. https://i.imgur.com/2dY46s8.jpg Even with the ESC installed, I was able to fit a Tamiya wrench on the locknut that secures the holder to the chassis, had no trouble installing this. https://i.imgur.com/ysAxoCW.jpg https://i.imgur.com/JcRcylf.jpg https://i.i...

So, I got a little something something coming in for my FR01 based car, and the question of chassis flex came up. The ol' question of whether graphite chassis flex much more than aluminum tub chassis. I got to researching a bit, and it just became too bogged down, and too much opinion without facts,...

The backspacing is what ruins every other option, the DS is very shallow, can't just hang an odd size wheel off of this, and expect it to be balanced. Look how short the axle is, and where the camber turnbuckle is, no room back there. https://i.imgur.com/sI8eyR2.jpg Turns out there is one very solid...

Good choice on going with foams. The Speed Hawg replicas in the kit are pretty good on pavement but they have a couple things against them. They wear fairly fast and the sideways are not stiff enough to take side loads. I'll go into more on my thread though. Thanks! Looking forward to guilt free dr...

Would've loved to hear those little tires screeching around the track, I have to do that someday. Glad to know the details about the DS tires, thanks! When you mentioned body roll, I was immediately thinking about the anti-roll bar adjustments. Looking forward to hearing what setting works for you o...

I don't think it's been mentioned but I've found another error with the manual. Page 14, rear shock install, step 7 shows the shock bushing with the flange toward the tower/bulkhead: new manual.JPG The bushing should be reversed as explained in the original manual (page 32): vintage manual.JPG After...

I spoke with Cheng yesterday and apparently in his kits he does include the 1.02 rear shafts so don't use the CE or Team manuals, use the original Worlds. I would highly recommend not using the rere manual for the majority of the kit since the rere manuals are beyond terrible. Find the original worl...

Tamiya F104 tires are an option for stock wheels and handle darn good you also want 2° camber front and rear