RC10Talk - The Net's Largest Vintage R/C Community

Haven't bought anything for a while, but picked up a couple of used bodies, originally bought for putting on cars as I build them to sell.... but now that they have arrived, I'm not quite sure. Body Lot.jpg My photo quality isn't great (taken on the floor at work), but the bodies are a fair bit bett...

Got mine.

Before going to sleep today, I checked the logs and whatever bad traffic we were being hit with has subsided enough where I was able to remove the US filter at least.

Thanks for putting the time into this reference! Just today, I needed to see what was out there, and their specifics, and this helped me out greatly!!

Excellent work, and much appreciated! This definitely will come in handy.

I wanted to run another test just to make sure I wasn’t losing my mind or completely off. I grabbed three sliders, although I really only wanted to test two; an A Stamp, the FR01, and the TQ10. I only grabbed the TQ10 to see if it performed just as poorly as it had prior. The test was relatively sim...

Cleaned up used truck with a few gucci graphite parts for flare. Still need to get the body painted.

RogueIV wrote: ↑Wed Sep 04, 2024 5:23 pm

Alex B wrote: ↑Wed Sep 04, 2024 3:44 am Some Photographs.

It comes with a servo or did you add that after?

I put the servo in.

Here’s mine, still exactly as I found it.

Took it racing this past weekend. TQ'd the 2nd quali, started 2nd in the main , but ran out of tires and talent. My podium mates drove impeccably, to boot.

Had a blast racing it, for the first time.

Need to build some adjustability into the suspension.

Finally finished the DS chassis. ... and this CAD model. https://lh3.googleusercontent.com/pw/AP1GczODUfKAyvEJN6BnryjraXfiJk0dYUnJnqHrMhKJTiEmtsoe0O32fmx9Ad6ak9hhGm-VHt6LmWZcw5viKVaHJyn_cFx-xeZ4s_li91bCOUnejJJTP2Nm2ioz9DZtY1eBge0-fSue9AX-KuydWH88NTY=w1798-h929-s-no-gm?authuser=0 https://lh3.googleus...

I tried to beat up on AE, but couldn't make it happen. Need to devise another tact.

Thank you very much for the add! I've lurking long enough and decided to go legit and be a member, hahahaha!!!! Thank you, again.

Here is a modernised Graphite RC10 with long 3D printed front and rear arms to accommodate Yokomo long driveshafts and low profile wheels. It has a few twists including the reversed rear shock tower to have rear shocks more in line. Steering rack is also 3D printed and allows a perpendicular servo m...

What do you do when you have an A stamp chassis and transmission laying around, as well as a 10T nose and suspension?
Rounded it out with some old ECX shocks and cheap electronics from the parts box.