RC10Talk - The Net's Largest Vintage R/C Community

A stream of deliveries over the last few days... Some elements for my printing ongoing projects arrived today (printer, post processing station, isopropylique acoohol and resin). This was expected with an accurate tracking... But there was a package incoming from Australia as well, which I did not e...

Here’s a look at the different motor plates.. Mini JrxT has holes for 14-16 tooth pinions and comes with a 15t. https://i.postimg.cc/mg3mnCZb/1B6530FF-64E1-41B4-8919-FBE304373D16.jpg Mini Jrx2 has holes for 17-19 tooth pinions and comes with a 17t. https://i.postimg.cc/wjYWF0pf/676916FE-A8C4-4FC3-AC...

This is my RC10 A+ chassis 6 gear buggy. It's gone through a little bit of front end evolution to replace the nose tube setup and lower the bellcranks a bit. https://www.rc10talk.com/viewtopic.php?f=35&t=47355 RC10B6 chassis, trimmed and modified Trinity Modified Litespeed Litesink Hitec Shredde...

Always something going on here. Latest project I have been working on late at night after rod work is expanding the gun room again. After expanding it twice in the past year I finally said the hell with it and just making the entire basement the gun room. Still have a lot to do and waiting on some s...

Looks like our LHS that my buddy and I ordered our from got em in so hopefully we’ll be able to grab them this week. Looking forward to seeing what numbers we end up getting.

M7 by 0.5 mm tap and die , the thread size of Tamiya SRB shock cap threads .

I called an end to my "Colin Chapman" experiment with my Storm 2000 oval racer. :) I ran the shocks very soft with loads of travel. I used Cougar wheels to lower it, but it still sat quite high for an oval racer. This naturally led to a lot of suspension movement which then required lots o...

JC racing in the UK have it on their "In the pipeline" https://www.jcracingproducts.co.uk/in-the-pipeline/projects-in-progress

They seem to be getting everything done more or less on schedule.

I finally settled on some tires and wheels for the little Hopper. I still have the basher setup as well. Screenshot_20230309_143633_Gallery.jpg I picked up some Blitzer Beetle wheels on clearance. One of my trucks got some new tires, leaving these rears needing a home. The fronts are JC Racing mini ...

I built this recently.

IRONMAN OFF ROAD!!!
That was THE game to get on at the pizza joint when I was a kid. There was a line!

TRX-1-3 wrote: ↑Fri Mar 10, 2023 4:16 am IRONMAN OFF ROAD!!!
That was THE game to get on at the pizza joint when I was a kid. There was a line!

One of many games I was terrible at, but it was very, very cool!

While the car is cool, I mostly gave it a thanks because you were at "666". :twisted: I must be blind, I don't see the 666 You were at 666 before I thanked you. You are now at 668. Screenshot_20230309_154103_Samsung Internet.jpg It is still 666 on the home page, which will be updated late...

No track time yet, but been thinking about making plans. There's a really cool track in the area but it looks huge in the photos. I feel like I'll be squinting to see my buggy when it's at the far side. The eyes aren't what they used to be.

My friend was good enough to pick our trucks up the other day. They had gotten in 6 of them. Mine is #2129. Turns out it’s on the box as well. He said even though all 6 were in the 2000’s, the numbers were all over the place. Mine and his are 100 apart and they were the closest together. Strange.