RC10Talk - The Net's Largest Vintage R/C Community

Update!.. Stoked! ....needed proof that it will go straight with 2 engines firing side by side...just did a test hit on two "D" engines only (no second stage)....50mph in 1.7 sec....straight as an arrow...no filming...tommorrow morning same setup by hitting the the 3rd engine "E"...

I finally noticed where to enter the caption that was right in front of my face.

Just got inspired by some threads on the Tekin conversion to post an old build. As per usual I had collected parts for a long time and wanted to build a mid motor conversion for vintage racing on modern carpet tracks. In 2014 I was ready to assemble a car for the Nordic Vintage Challenge. Ended up d...

TheDiamondOne wrote: ↑Tue May 02, 2023 2:06 pm

Dadio wrote: ↑Tue May 02, 2023 1:25 pm So how far's the Gand Conyon from your place ?

Bout 2500 miles..lol

You should move to a smaller country , then it wouldn't be so far away

I’m using 4000mah batteries and after a 30 - 35 minute run, the motor is still only slightly warm. The taller pinion gear installed yesterday has yielded an increase in speed but I think there’s more left in that motor - maybe much more. It just needs more gear. I’ve been running the largest 32dp pi...

This is my Trackmaster oval car. Repop Trackmaster chassis from FTW. Badger oval car transmission / sliders McAllister front lowering kit Novak electronics / Reedy Conquest 17 motor Bolink wheels Brewster Baker inspired body Build thread here: https://www.rc10talk.com/viewtopic.php?f=37&t=48166 ...

Posting up my RC10 mid motor conversion from Tekin, with the active camber link activated. In addition it is also sporting a Schumacher SACS (active caster) front suspension kit made for RC10. Back in the days mid motor was rather exotic, but became the golden standard on high grip tracks in the 200...

Car looks like a hand-full.

C Stamp RC10T

This is my Shorty bucking Bronco. Its an Axial SCX-10 rebuilt as a short wheel base truck in order to accommodate the short wheelbase of the beautiful Tamiya Bronco body. A STRC short wheelbase chassis kit was used along with STRC aluminum shock mounts. Short RC4WD aluminum shocks where used to get ...

Well we made a decision. Time to crap or get off the pot. We are bypassing 88mph, 100mph. This weekend sometime going for 120mph. Just gonna send it. Stay tuned fellas.

I got a bunch of driveshaft stuff in the mail. Xtraspeed makes Scorpion universals, among other stuff, so I'm going to start seeing what I can do with the parts. I think the rear shocks need about 4-5mm in limiters to keep the bones from flying out. If I can get it together, I might be able to make...

By far the best pictures i have seen of this car.

JOSH STRAUSS TRIBUTE BUILD. This is a tribute build to a old friend of mine, Derek, and also Thumb's best friend growing up. (He won't speak to any of us now, he is a rich judge and lawyer) He was a rich kid and had this car prepared like you see here back in 1989. We all wanted it so bad but had no...