RC10Talk - The Net's Largest Vintage R/C Community

Well looking for something else on Ebay I bumped into something very familiar looking RREGSHSDGSD.jpg What gets me is the inverted rear shocks, which has been something that people are currently doing. I was looking at that one, too. If I hadn't bought all the stuff to do a Retrofit trans for my LX...

MTM motor installed with a new RPM #7308 gear cover.

Finally found a picture of the former servo lay out. Not too good, but you get an idea and you see the large saver mounted...

Didn't think about it when I sent the car, but I actually have a new Coyote saver in black. Same tree as the grey silvertriple posted above. A little donation to RC10talk and I'll send it your way if interested.

Here is the overdue pic of the servo saver cluster included in the NIB SG Gemini SLX package https://i.imgur.com/jXIh5Cn.jpg Now that being said, it doesn't correspond to the diagram present within the box, and the bumper is not corresponding either... Seems that there is a lot of subtile differenc...

I see I'm not the only one that has way too many of these. I think my current mini count is 4 JRX2 and 3 JRXT. Oh I plan to have 7 (or 8 but that 8th one is dumb lol) by the time I am done, one for each model based on the jrx2 ;) I added a thin nut under my ball studs now the steering doesn't snag,...

They already have Losi, so it makes sense.

Let's be honest, Trinity doesn't have the following that they did back in the day.

And I'd rather see Horizon buy them than the name fade away.

I finally have steering parts to model

Oh nice! I have been working on a xx buggy chassis to shrink to 16th scale myself. I was thinking of redesigning those bellcranks a bit to eliminate the bearings and servo saver when I shrunk them I'm planning on changing the design a bit to try and emulate the worlds prototype's machined look. Sho...

Got in my new test subjects, they don't seem too willing but they have no choice! Muahahaha -evil scientist laughter-

The camera adds 10 layers of dirt to the dirty one heh.

Alright, I've procrastinated all I can as it pertains to updating the forum software. It's supposed to be done at least once a year but I've let it go over two years now. A number of new versions have come out during that time, and we've fallen almost too far behind at this point. So with that being...

I spent a little time on Fusion 360. Have very little knowledge of the program so it took a while. It is supposed to be an idler for a Kyosho TOMSE rear gear box. I think I got the tooth count, Mod , pressure angle and dimensions correct. Finding the pressure angle almost broke my brain. :shock: Idl...

Well... I started with Tinkercad, and I know precisely what I'm talking about regarding limitations... Fusion360 is from the same editor and is really more powerfull. And I'm not alone to say that. Worth trying... Have a look at some of my Nichimo, Hirobo or the Marui Super Wheelie/Big Bear threads...

I wanted to print some orange antenna mounts so um.. yeah

https://cults3d.com/:1327190

one slotted for easier antenna mounting.

...oops, used the 3d model I had made of the rc10 antenna mount before I adjusted the holes for antenna tube, was an easy fix.

It was a good Kyosho day.. A new 480S. https://i.postimg.cc/tgzjZb73/6-CA247-C5-6032-41-A0-9568-9-F4288049-D80.jpg And something I thought I would never find..A W-5005 Special Rod Set(Turnbuckle upgrade) for my Maxxum FF build. https://i.postimg.cc/W3bP0yJQ/80279-B1-A-4129-43-AC-97-C3-8-D722-F35-CAF...