RC10Talk - The Net's Largest Vintage R/C Community

Seeing as I have one each of the 10th scale cars I am going to to some measurements to get the shock lengths as close to right eye to eye for the xl shock cars, the lengths are going to be different as the models build with different numbers of spacers in them, lxt rear is too long for the ProSE and...

How a question or comment is worded will change how it is perceived. If you start with "I've broken this POS three times and this is junk", it'll be perceived as a rant. Unfortunately, the internet is full of whiney bitches. If you clearly state your problem or ask about what can or can't ...

R/C Excitement, Inc. 208 Bemis Road Fitchburg, MA 01420 (978) 342-3374 ************************************************************************* **NEW FOR 2023** 1. Flipped Schedule: This year, in an effort to get more racing in, we’re going to be flipping out program upside down. This means that Sa...

ooooo.... I hadn't seen the 7 car before, or at least not in a long time. Looks like he favored Hornet/Grasshopper sized front wheels.

I joined the comical rc10 club

7 1/2" with the old school front end and trailing arms. I took out 3" total so with conventional arms it might vary just a tad

Instead of dealing with adapters, CRP still makes axles for this.

They fit RC10, trailing steering blocks and have the correct Tamiya axle dimensions. They have standard buggy, wide-track buggy, and truck versions.

GoMachV wrote: ↑Wed Jul 26, 2023 12:14 am 7 1/2" with the old school front end and trailing arms. I took out 3" total so with conventional arms it might vary just a tad

I’m kinda thinking about doing this now to an extra JRX2 I have.. it can be shortened 1.75” and still retain the 5-link. A rear H arm setup could go 3”

Sorry no updates currently. The partner we are using has been pumping out several other molded parts lately so this has been pushed back but it is still planned

I can't help but think it looks sweet as it slowly goes together... need to print some of Rogues logo wheels for it, but I know it will print badly because the yellow is old and stringy heh

This just arrived. I had bought a used one from a Japan eBay seller and they lost it in their warehouse. Then recently I stumbled across it NIB on Amazon. It was shipped from Japan in about a week. RogueIV could probably pick one up on his trip, although Amazon still has a few more available. Anyway...

Oh my goodness, it is sized perfectly for the tire

I would "loosen" the tracks resulting in lower corner speeds and cars sliding around. This promotes passing. Passing (or at least trying to pass) is racing. I am not a fan of what (to me) is just processional Formula 1 with hills. I tried watching EFRA (I am a Schumacher fan and they compe...

working on a project a friend requested
.

7 1/2" with the old school front end and trailing arms. I took out 3" total so with conventional arms it might vary just a tad I’m kinda thinking about doing this now to an extra JRX2 I have.. it can be shortened 1.75” and still retain the 5-link. A rear H arm setup could go 3” I have an ...