RC10Talk - The Net's Largest Vintage R/C Community

Okay, now I’m done, so I figured I’d go down my 5-link runner build, here goes: Junior 2 chassis XX-T retrofit trans w/22 5.0 slipper MIP XX CVDs w/XXX Gen 2 axles Vintage RC lipo holder (modified) Robinson side bulkheads Factory Works chassis brace, steering and rear shock tower Jammin’ Pro SE fron...

My most recent classic Andy’s paint job for my RC10DS

I don't think I've made any component changes to the car since last posting, but I've run it a few times and eventually decided to do a rough setup for running at the upcoming burn. Doubt I'll have time to run it or anyone to run with, but that's neither here nor there. Anyway, I set the rear ride h...

I think that looks awesome with the mini JRXT body! The wide/truck RPM arms really add to the comical effect too.

If the 3 comicals could join forces, we could beat that concours winning ringer!

Oh that was you on FB! Great build. I didnt ask before but how's the geometry on the ld2 knuckles compared to stock? I had to play with raising and lowering the bellcranks to get the right turnbuckle angles so bumpsteer was reduced. Also, the Jammin' front shock tower has taller holes for the cambe...

One more pic before the BK race next weekend:

I made the three hour trip today and picked up this rc10 from the guy, real nice guy, knew it's history, everything. I'm kinda speechless right now lol, I'll have to make a separate post about all of this, I'm just in shock right now that I own an original rc10 after all these years of them slipping...

Got some running footage today. I had a guest driver while I fumbled with the recording. :mrgreen: https://youtu.be/RJN9jKUfeOI?feature=shared I also added a skid plate. It comes in handy. :lol: . PXL_20231015_200726313.jpg . PXL_20231016_181231914~2.jpg . The shiny spot in the middle is interesting...

Started putting together a long shock vintage runner for a friend of mine

One heck of an esc for a runner

This is my first project posting on this forum. If this is the wrong section, please move it to the correct section. I enjoy doing custom builds dsigning and fabricating custom parts. I have a decent amount of capabilities within my shop including CNC machining, manual machining, 3D printing. I also...

Swearing off this spaz stix liquid mask. Literally. IMG_20231015_151848771.jpg Basically turned this new body into a practice bodysince all the details i wanted to add got borked. 3rd time this stuff has kicked my ass. Works fine till paint is on it then it get super brittle and refuses to come off...

I'm coming in hot and heavy on this. That usually happens in the beginning when things are new and exciting then things taper off. I managed to rough out the chassis model so that I could start mocking up the layout. I was a little nervous about having to bend the nose piece up. More so than the oth...

I wouldn’t use anything other than bitty designs or bob divleys only 2 I trust. Just watch for small lumps in the bittys if it’s not fresh