RC10Talk - The Net's Largest Vintage R/C Community

https://i.imgur.com/xE2tPGw.jpg https://i.imgur.com/m3GnYqC.jpg Suspension works like this, lots of friction, but the pivots move in those caps like the metal parts do. Everything fit together easily, due to the accuracy of the model. Broke the passenger side upper front arm, printing a new one now...

XLR8 , my mistake, I gave you the wrong dimensions when I said the pipe joint was where the crossbar was, it was lower, that's why the shock was too short earlier. Also wasn't thinking this is PLA, and easy to make it work. https://i.imgur.com/1y9jiE5.jpg https://i.imgur.com/Qf2uDOn.jpg Will get th...

Glad I didn't follow that QIDI factory video blindly. I'm not replacing my entire Chamber Heater as shown in their Factory video, just the SSR, so I only needed to remove the back cover and not pull the entire top and bottom off - as the factory video would seem to suggest. Made an addendum to the f...

Brendan2904 wrote: ↑Wed Nov 20, 2024 7:53 pm How did you attach the rear wing?

I use 3M VHB on everything, also used it on the tail wing.
https://www.amazon.com/3M-Scotch-5952-VHB-Tape/dp/B01BU7038A

It's clear to me that updating the firmware is a critical first step in my case and the printer will need to connect to the web to accomplish that step. At the moment, the printer is connected to my laptop via LAN-only mode. The QIDI is able to update Firmware from an SD card, do Bambu give you tha...

Apparently, the X1's firmware can be updated via SD but not the P1 -- at least not yet. Exiting LAN-only mode does not free-up access to the web. Bambu Support had me create a cfg file on the SD card that contains my LAN sign-in credentials. The printer reads the cfg upon boot-up and I no longer se...

Brendan2904 wrote: ↑Thu Nov 21, 2024 4:14 pm I was going to use gorilla tape but I think the 3m would work better.

I've found that lexan scissors will cut the 3M VHB without gumming up like other scissors do, really easy to stick the 3M on something, and trim the excess that way.

I printed the Tamiya Sand Scorcher driver figure, from a CAD model I purchased a while ago. I printed the face in three different orientations. The faces shown are in the orientation that they were printed in. Notice the color, or reflectivity is exactly the same between all three. https://i.imgur.c...

This might help with the wing setup? e0f854_ccf8ab505d6544938db1b3d3c18f7ca5~mv2.jpg I was going for the actual car that won the '85 IFMAR 2WD buggy race, not the magazine cars. Thanks though! https://i.imgur.com/98WxrHh.jpg https://i.imgur.com/E2LOzqJ.jpg JJH came in 2nd place in the 4WD buggy cla...

Amain still has the preorder: https://www.amainhobbies.com/team-associated-rc10-40th-anniversary-1-10-electric-2wd-buggy-kit-green-asc6010/p1586171 And a $30 coupon. https://www.amainhobbies.com/discount-coupon-code The green edition looks like it has the Tamiya sized front wheels, at 1.5", har...

After looking through all the vintage boxart, I can't find any pics of the passenger side. https://tamiyabase.com/images/stories/boxart/box_58016_04.jpg I've found others interpretations of what the passenger side looked like, but the K&N decal under the door handle is directional, it won't work...

Your license plate does look great. I'll look in to the gloss decal sheets for color laser printers, would like to print on the good stuff if possible. Three fried ROM chips on this Commodore SX-64, has kept me troubleshooting and researching for days now. https://i.imgur.com/fBMv0r7.jpg Better than...

Please tell me you're running your 3D printer with a Commodore 64... 8) 8) 8) :lol: Laser prints are more resilient than inkjets. Inkjets require lamination especially on vinyl where the ink comes off easily. Unlaminated laser prints will wear and fade too, just not as fast. Laminating makes the de...

Got the floorboard painted. https://i.imgur.com/3Fqc8jP.jpg Finally solved the mystery of the larger decals. https://i.imgur.com/MKETM5Q.jpg There are two sheets that MCI sells for the Sand Scorcher. The sheet on the left is Sand Scorcher specific, and that's where I took the larger Penzoil, Simpson...

The guitar sounds like something from Castlevania, cool stuff. Speaking of castles... so many quarters spent at Aladdin's Castle playing Super Off Road... worth every penny. That's a serious level-up, using a guitar :lol: Are you a game collector, or a MAME user? Let me know if you need any of thos...