RC10Talk - The Net's Largest Vintage R/C Community

Pic is from http://www.hirosaka.jp/story41.html On the same page there is also a picture ( http://www.hirosaka.jp/img22/memo23/52.jpg ) of a RC10 without a body, but red wing with yokomo decal (and yellow end plates) "Mr. Sumita, like Mr. Hirosaka, used the RC-10BX in stock and adjusted the sl...

On this page there is a black/white picture of Mitsumi Hirosaka's yokomo with number 2 on it http://www.hirosaka.jp/story27.html http://www.hirosaka.jp/img2/memo13/68.jpg "Yokomo Super Dogfighter 2nd place Mitsumi Hirosaka / Unlike his brother Masami, he drives a machine in almost normal condit...

generic 1/8" "external" retaining rings. Parma and others sold them back in the day but a place like McMaster Carr sells them as they are just common industrial hardware.
https://www.mcmaster.com/retaining-rings/external-retaining-rings-7/for-od~1-8/

HFT has them also. https://www.harborfreight.com/300-piece-external-retaining-ring-assortment-67655.html

They are from the RC500

Hey Sandkil, I just bought those RC500 ones from eBay, the closest looking ones I could find to the ones on the Masami RC10GX, when they get here if they look and feel right happy to send you some?

Ok I have almost all parts needed to build my Kinwald worlds rc10 now minus correct rear wheels and 1/4 inch MIP cvds.

Measuring the associated 5118 part, I think these from Mcmaster Carr are the right ones. https://www.mcmaster.com/90341A101/

Anyhow these are the Associated one.

My absolute pleasure, following your build on Instagram and am already lagging behind you with mine. As soon as I get them will do a test fit with pics and if good will send you some

Looking good!
Such perfect photos could be mistaken for 3D renders

sandkil wrote: ↑Mon Jan 16, 2023 9:08 am Some reproduction bits for the GX and future builds.

Very nice! Would you be able to point me in the direction of the source please

Just got a new HPI Mustang GTR 200mm body, a gift from my wife. https://live.staticflickr.com/65535/52635639720_86250eef2d_c.jpg These came in a few days ago...Boom Racing's ProBuild 1.9 customizable beadlock wheels and a RC10DS front end setup. The setup is in superb condition. https://live.staticf...

Looking good

So I just received my package and they appear to be the right size….however the circlip pliers I have are too large, any suggestions on the correct tip size for the pliers or suggestions on a cheap pair on amazon? (Really appreciate any input) Lol I have already fired one across my living room which...

Not cheap, but these are what I use on all the small clips that I've encountered.

https://www.amazon.com/44-11-J0-SB-packaging/dp/B002J1OQBW