RC10Talk - The Net's Largest Vintage R/C Community

Here are photos of my Italian sponsor-themed RC10GX. Finally, a body that complements that white bumper. Hope to add a wing later...but for now.

sandkil wrote: ↑Sat Oct 14, 2023 12:02 pm Hey Alex,
Have you checked out Delta Plastik?

https://deltaplastikusa.com/collections/1-8-vintage-rc-bodies

Hi Erik,

Yes, i have the site saved. I got the body for the RC300 from them.

Eventually I'll decide on the body style and order from the site

Don't think it's possible , the belt would have to be routed up over the motor pretty harshly , belt drag would be bad . You might be able to use one of the really early cable drive setups .

Last night I did a test cut for a Brian Kinwald 93 worlds style rear shock tower as close as I can reasonably get it I think. Let me know what you think.

Hi all, just wanted to share my blue carbon fiber shock towers I made today for my A stamp car. I think the blue works well with the gold. Also blue is my favorite color so that’s a thing too. Let me know what you think.

Gold pan project with blue accents

I couldn’t not get the promoto. All stock….for now.

Box art rc10 runner

While waiting for parts on this project, I watched this: u22BKr_aPjY At 7:53 he says the track was torn up and Brian Kinwald put in a good lap with the Losi Hydra Drive/Stealth combo, says he then bought the entire team the same setup. Having the late Stealth CE kit from '92-'96, I went looking for ...

Today was exciting. The first batch of iridium carbon fiber parts got cut. This includes BK rear towers for the 93 worlds car (mounting holes still need to be countersunk) as well as a batch of towers for the Losi mini JRX2. I’m sure many of you have seen “iridium” carbon fiber and I imagine many ha...

Progress update…this design is now cut in “iridium” carbon fiber, just like BK used on the 93 worlds car. Very cool
Material.

Starting off my Christmas vacation with another 10Lss build.🙂 - Composite Craft Ground Effects chassis, Aero lower pod plate, graphite upper plate, graphite t-bar and sway bar - Wood Racing aluminum front end - CRC aluminum bulkhead and collet-style clamping hub - Litesink motor plate - Trinity serv...

Been at this one for a while now and finally about to wrap it up. All parts are scaled 1/2 from the 12e making it a 1/24 car. Fits slot bodies but I'm struggling to find a nice early 80s stock car for it. I made a few concessions along the way but very minimal. For example the kingpins are press fit...

This took a lot longer than I wanted, but the 93 Kinwald towers are going on eBay today made from 0.072” iridium carbon. Obviously, these are going to be fairly limited being a niche item, but if you are looking for one, check my eBay store.

Success! The adapters worked out pretty well. I do need to source properly sized rear springs though. The included "stiff" springs aren't enough to keep the back of the car level. I put some placeholders on the rear but the diameter is wrong. Definitely got rid of the pogostick effect. IMG...