RC10Talk - The Net's Largest Vintage R/C Community

And here is the Hunter with the new set of wheels... https://i.imgur.com/HXJ0Q2X.jpg https://i.imgur.com/EvByc8N.jpg https://i.imgur.com/HiOUzrL.jpg I'm quite sure one looking in the details would say the rear side of the tires are not good, but this is to run the car, and I know from what I did wit...

TRX-1-3 wrote: ↑Mon Sep 11, 2023 9:18 am 2023 VONATS concourse best paint! Nice.

Well, it's tranny Tuesday. :D I have the parts sorted and will start opening everything up if my ocd can lay low for a while. I won't be using the Thorp Stealth slipper top shaft, but I will set it to the side in case I ever decide to swap out the Hydra. It appears that particular 3101 Hydra kit is ...

Here are some Pics

...

Today was shock tower day. Opening the bags was somewhat stressful since I had never seen the rear tower in the wild. I drilled two upper holes for the rear tower to mount properly to the RPM rear bulkhead. The front bolted up as expected. I'll most likely use 3/4 shcs for the upper & lower shoc...

Finally got some done on the graphite tub.
A&L steering rack with some Composite Craft Teflon tape underneath and the mighty Schumacher SACS active caster system U1617A for the RC10

How about it’s only a box of spares if it ain’t built. Only reason I buy anything nib is to build it myself otherwise what’s the point That's the great thing about this hobby. Some collect sealed kits, some have open box but unbuilt, some build them, some flip them. I suppose the point is whatever ...

This started as a project for a friend, but in the process of drawing it up and getting parts together I decided that I needed one too. The suspension arms, bellcranks, shock towers, battery cups, chassis, top plate, etc. were all designed by studying photos of the original 1991 buggies, RC10, and R...

I completely forgot I bought this

My donor car arrived. It has some unique features.
. . .
After casting off some crap, it's almost a respectable pile of junk.

"She's a beaut Clark!"
.

First and foremost, a HUGE shoutout and appreciation to Larry Doe for helping me make this dream a reality. Larry was kind enough to bring my car down with him for the IFMAR worlds this past week at Hobby Action Raceway in Chandler, AZ for me to display in BK's memorial pit spot. I'll have this on d...

Will be watching this with keen interest. Love the Lipo specific chassis, if I ever build a runner I am definitely going to do a 91’! The Pavidis themed paint job on the body is also awesome, love it! Hi ! Yes, will be a runner for carpet racing in europe. Will go for the original shocks with diffe...

Final pics .... enjoy

Some general built information: - used Associated ballcups or RPM (on the steering) - uses FAN RC front arms and original (NIP) rear arms - FAN RC bulkheads and middle shaft with slipper unit (no one way anymore) - steering knuckles are from Kyosho and much stronger then the origina lones - chassis...