This topic will act as a way for me to convey any news regarding the forum that I feel members should be aware of.
Last post
Google is forcing any site that uses Adsense to display a GDPR pop-up notice to those located in the EU and UK. If you don't comply, your sites ads won't be shown in those locations thus losing the revenue. The deadline isn't until January 16th 2024...
This is the place to discus the: Ultimate Vintage Brushed Motor Reference Guide
For cleanliness and clarity, it was decided to no longer allow posts to be made in the actual topic itself. The discussion regarding it can be made here instead in...
as of late, there has been a bunch of the same kind of threads being started. guy digs out his old r/c from his parent's attic or basement and now he wants to get it going again with modern electronics. i know for me, i get tired of answering the...
Last post
Thank you for all the info and taking the time to explain it to me Joseph. I'm not 100% set on having him use the vintage one, but I have several, probably 6-8 rollers I got over the years when I saw a good deal. I have lots of back up parts as...
Well my nib RC10t should be on my front porch, and my wonderful girlfriend is going to bring it up to the physical rehab center that I'm at. You can read about that story in my other topic in this section but would like to post some pic's later just...
Last post
More time spent faffing around with operating systems than actual productivity on pc's methinks m'lud.
I'll stick to goose feathers and ink...
Futaba used to offer these two spec lists for their older discontinued receivers and servos. Now they're only available through the Internet Archives site. That's a bit of a pain. So I decided to edit them a bit, and post them here for easier...
Last post
I see that R142JE is called out in the manual. Somehow I muat have gotten confused about the 152 superseding the 142. Thanks for the measurements.
20 does sound like a good starting point. Just making sure 23 isn't more common.
So what models from the gallery section are your favorites? Post as often as you like. Crediting the builder would be nice, but leaving it as an I Spy type post is cool too. This one will always be in my top 3 all time. Perfection... IMHO :mrgreen:...
Last post
All of them are beautiful. But LoboNYC's DS Pantera is just... jaw dropping.
After receiving a few requests for account closures, it's something I feel needs to be addressed.
Closing your account is not an option. If you no longer have a use for RC10Talk such as leaving the hobby for instance, you say your goodbyes if you...
Here are the pictures I shot of Gene Husting's RC Museum that's in his home:
Last post
I actually acquired Gene's RC12i from Curtis last year. It was not his personal race car but his promotional/marketing car. It is on display at Hobby Action Raceway in Chandler, AZ.
I’ve always been fascinated with R/C cars. I recall having a few low end ones that went forwards and backwards and only turned in reverse. One year for Christmas I got a Shinsei Dust Runner ATC 250 three wheeler. It was digital proportional and was...
Two things with this post. 1st, I would like to complement Alex on the most professional and best looking images of his cars and parts, both on other webpages and his ebay listings. Second to none. 2nd, A question direct to you (Alex), what do you...
Last post
Thare's a great DIY light box article on wired.com:
It's simple, do not start a thread asking what your item is worth. We are not Antique R/C Car Road Show here to appraise your goods. The answer to What is this worth? is We don't know. Another answer is Whatever someone is willing to pay for it. Do...
This is a how-to that I just posted over at Clodtalk because the site search feature doesn't work. This method works for any site. Hope the info helps.
--------------------
The search feature of this site and others leaves much to be desired. The...
Last post
I do own Macrosoft stuff. Macrosoft? CRAP!!!
No wonder this keyboard was $1.
:lol:
Just wanted to share the recent body set i completed for my RC10 B6.4d. I had the idea to paint a similar livery as a homage the OG RC10 box art. Below are some photos of my original RC10 and the B6.
Last post
I am new here and I just am trying to learn how to start a conversation. This is a very nice rc10. I would sure like to have some nice paint work done like this I need some advice on the bet way to get some bodies painted up for some of my replicas...
Here is my first successful paint job with the new airbrush. The first body was a mess, as I did only two coats of liquid mask and it was a mother to peel off.
Last post
870c yz10 Protech body from boki in cliff lett style colors.
Post only interesting pictures taken by you, not ones you find on the web. Any subject matter is fine...
Last post
DF092322-8BA9-44D4-857C-C3FA1110A202.jpeg
Reminds me of the asshole song and sometimes I park in handicap spaces while handicapped people make handicapped faces , cos I'm an asshole ,I'm an asshole.....
I live in an area that already gets significantly more rain (+60%) than the national average. On top of that, we've been having record numbers lately (on top of an above average year).
So it hasn't...
Last post
Yes, the like is basically what happens when one's brain can't keep up with their vocabulary. :lol:
Some of the Parma body molds are now being pulled by Mid America, a slot car shop. I have seen posts of people asking for specific bodies such as the tmaxx dump truck and I requested the grasshopper body- both were added to the website and I'm just...
Last post
Stoked!
Cool!
Thought that said Stolen! at first... had to do a double take... :shock:
*Note to self: must pay more attention when reading :lol:
I was reading a thread Repairing Novak 4 esc _ what tools and what parts? and it got me to thinking.
When originally building my TOMSE I wanted to use my Novak1 ESC only later to find out it was not working.
First I tried to look for any info on...
Last post
Thanks again!
Interesting... The white signal wire is connected to the #5 on the IC.
But only by soldering across 2 separate copper pads. This is shown in your pic inside the red oval that I drew.
This seems to be a hugely popular thread on another forum out there, so let's see how it do here?!?
Simple, what did you do RC wise today? Pics or it didn't happen! Painted a body, rewired a ESC, mounted some wheels, finished a 3-year project...
Last post
Finished up my Blitzer mechanically. Front camber is off, especially on the driver side, which is perplexing considering it isn't adjustable. Maybe the caster block is out of whack. :?
It's not uncommon. These things have a lot of play in the...
Not just scale crawlers, includes vintage class race.
- limestang
Last post
I liked some of the movie replica vehicles they had there... like this video had the Pizza Planet Toyota from 'Toy Story'... but there was also a Dorothy toting J20 from 'Twister', semi with full mural trailer from 'Smokey & The Bandit', 'Back To...
Just wondering if anyone has heard of or dealt with this company before, not sure if it’s a real site or a really good scam
Cheers adrian
Last post
Never shopped there... which you're probably wanting people who have... but, Winternity Torino google street view address puts them back where the orange van is... address placard above right of door is same listed on their site, shades are down but...
Erich talked about a thread that never ends, here's an other one that should be funny.
The idea is to ONLY post pictures, wherever they come from, and to respond to the last one with another that shares an idea, a concept, a number or whatever with...
Last post
Sent this to the 'ol lady earlier. I figured I wasn't going to get any this weekend anyway, so why not...
I am looking to build a 1/10 wheelstander just for fun, but am not finding much in regards to COE bodies outside of Tam Euro Truck TT01 bodies. The Tami bodies may work, but are a little off on WB from the Legends chassis I have sitting around,...
Last post
That double cab is pretty cool, but with shipping from UK, it is a bit too much for this little side project. Thanks for the link though! It may very end up working out well for another project. :D
I got a deal I am working out this weekend for a...
Would 1/12 scale offroad racing ever attract interest?
We have 1/12 scale on-road class using 1/10 scale electric motors and batteries and electronics. Why not in offroad?
Once we get to 1/16th scale it gets to be a little too small, perhaps a bit...
Last post
Our local track saw an uptick in novice racers with the Losi Mini B/T2.0. These were kept as a controlled spec class, but many kids, including my own, soon moved up to 1/10 scale.
Well, I am a old guy that just keeps messing around with RC stuff.
Found my old RC-10 and RC-10T, both pretty old.
In fact, the RC-10 is so old it still had the mechanical wiper speed control on it.
Controllers were lost in...
Last post
Welcome to the forum. Salem here. Originally. Parents still there in West Salem. RCPlus! is a great shop. Although I have not been by there since it has new ownership. Anyway...welcome aboard!
I know this forum has chat room, but it seems relatively not used by most. Maybe many don't know how a chat room works, or really just don't want to enter a chat room.
So, how about a thread for bored people sitting around who want to talk about RC...
Last post
So, if you are trying to figure out what to do with that $99 DR10 or $75 Losi 22S you bought, just an idea:
I was asked by a friend to make a template of my Ascots chassis for him while I had it stripped down. :!: I thought it might be useful to somebody on here. If you want a copy you will need to pm me so I can email you a full size version.
There's the Things that irriate you thread. The Vintage... I'm getting tired of it! thread. So, welcome to what should be the quite comical.... Today, a stupid person...
Started a new project. On a Sunday. With no clue what they're doing. Three...
Last post
You could dedicate a completely separate thread just for stupid drivers.
The other day, some idiot starts changing into my lane, when I'm right there beside him . But not only that, when I laid on the horn, he just ignored it and kept on changing...
Anyone have a source for decent replacement endbells for stock and modified brushed motors? I have quite a few motors with extremely nice cans *rimshot* that have horrid endbells.
I look around on eBay from time to time and see a few here and...
Last post
Buy some of these (or similar cheap motor)and strip them for parts.
I have old vintage batteries which have leaked and dried with green acid on the terminals. I also have 20 and 30-year-old batteries that appear perfect on the outside, and which have never been used.
After batteries have leaked and dried is that...
Last post
I store my display batteries on the shelf amongst other items like buld dischargers and other electronic equipment. I even have a battery bug on display, anyone remember those? I also display some loose cells in battery jigs to emulate how they were...
Anyone know when the last printed Tower Hobbies catalog was?
Last post
It isn't perfect, but my Samsung Galaxy phone and tablet both have scan functions in the camera settings. It automatically adjusts and crops the page. It does take a little getting used to.
Not ideal for a full catalog but it would work okay for...
The centering spring for the wheel on my transmitter let go this weekend. Trying to hold off on big purchases for a bit, so I thought I'd take a stab at opening this one and seeing if I can print what I need. Got all the screws out but it doesn't...
Last post
Fortunately my job still swaps out customer printers and had a bunch of old Dymos in the bin. From my printer design days I recall that Dymo likes to use worm gears and extension springs (super specific industry knowledge), so I took apart a few...
While doing some research for the RPS Yokomo SE I just bought, I came across this article in the Dec 1999 issue of RC Car Action. Some interesting text, but the RC10 pics are all wrong; just a stock RC10 replica, not Halsey's actual car.
Enjoy....
Last post
Thank you for this old school post!
By chance anyone have a picture of the motors/similar that won the 1985 race for the rc10 and the yokomo 834b?
I get this is sort of a depends situation , but are you more apt to buy piece by piece r/c items or part lots? These would be used items also.
Last post
I scour the net for a particular part if I need it and also look at badly worded listings and generic things and have purchased a lot of items for just one particular thing. It seems to work out well in the long run, but you do get some stinkers...
I don't know anything about Tomy motors and I don't see any info out there. This Tomy Zenergy is labeled as 1/10 off road racing motor and looks to be a triple wind. Number of turns is unknown.
.
PXL_20230818_234717318.jpg
....
Last post
No idea about that motor, but I love that endbell!