RC10Talk - The Net's Largest Vintage R/C Community

I got several Stealth gear boxes myself..........I noticed 4 out of 5 have a small slit at the bottom side of the gear box ........which potentially will have dirt going in .........is it a defect or the factory intentionally making such a design...

Is there a way i can repair the front of my graphite chassis where it is delaminating at the front edge?

Thanks in advance

I just scored a RPM worlds car in good condition with a few scratches. Overall the car is a 8-9 out of 10. I am in the process of two separate projects one a klein arm tub car and a custom trailing arm /GT2 dual deck car. I am guessing that i could...

This is my start to a gold pan runner build. Milled the chassis at work and rounded over back of chassis where it attaches to the motor and also rounded over the nose piece and cut it the same shape as the 6309 nose. Then sanded edge of chassis all...

Time to post pics of my stuff. Here’s what’s left of my racer from 1989. I got back into RC10s after impulsively buying a nice CE on ebay last year.

The gold chassis and stealth trans are new/used from ebay as are the wheels. Regretfully, I sold my...

I've never seen a resto project of a RC10CE with the driver figurine. I remember way back when I got the RC10CE Graphite kit, there was a polycarbonate (like the body) driver figurine. I remember this because I didn't think much of it at the time,...

Here is My NIB Edinger RC10. Hope you guys enjoy! :D

I have been wanting to start a project to race on a large MX style track predominantly used by 1/8 cars and trucks. I love the way a trailing arm car runs and handles. The track is loose and rough with huge jumps. It will be a 10th scale buggy built...

I have this one buggy you guys have see it a million times but now the cooler weather is moving in and im breaking my cars out to go running again. My question is which do you guys prefer the original arms that are short or the wide track a arms on...

i have a 6 gear gold pan drilled for a stealth transmission.
i cleaned the car and added radio gear ; itll run fine for a few feet then it starts to slip .. the pinion is spinning the spur, but the car is not moving.
you pick the car up, the rear...

I have collecting parts for the past few months after selling off all my old RC10's(big mistake!!!) and now I am going to build 4 cars!! #1 I recently picked up a mint Worlds(later all black version) car that needs a cleaning and body trim/painted....

Pick this up off a dude, pretty sweet buggy, came with front bumper, original speed control wiper arm thing.

Yup - another Worlds car! :)

This is my build-up thread for what is my first RC10.... I now also own a nice Gold Pan RC10.... but this is my project car & one that I intend to be my vintage runner (hopefully to be equipped with a Brushless motor &...

Is the b3/t3 platform still competitive in club racing ?

I found the wheels at my LHS and they seemed to have right offset for RC10 and later B2/B3.
parts # is Hongnor TM-49Y or Ofna #40849 wheels for CRT.5. and just checked they are listed on ebay also

DSCF0600.JPG

offset is perfect with HPI hex...

Just wondering who made this shock tower and if it was of any importance. I was wanting to dye it black for my graphite runner I am building but did not want to mess up another valuable piece like I did yesterday. I accidently put one of my long...

Ok I'm putting a stealth from an rc10t4.1 on my A-stamp and I'm wondering if I can use the slipper clutch from my original 6 gear or if i need to order an all new slipper clutch? Thanks in advance for any help.

Here is the start to my project racer. I started with a Composite Craft graphite chassis that I drilled for the Stealth transmission. All of the nylon was already dyed, but very poorly, so I re-dyed it all. I used Andy's arms front and rear, Houge...

I found this on craigslist yesterday!! I was shocked...it's pretty minty! Came with the body, and an unopened wing, and all the manuals, stickers and tools! Enjoy!

Found a B4 in 4wd conversion.

See the URL, somewhere in the middle you will see it:

Very nice work. :lol:

two of my rc10's

Here is a picture of my B44 with my RC10 MIP 410L.

I got this car when I was 15 and sold it to a friend back in '92 or '93. I contacted him a few years ago and he still had it in mint condition but added the A&L chassis brace. He sold it back to...

i was digging through my big box of rc10 parts (some old, some aquired with resto cars). i have a odd set of white rpm arms and today was when i wondered.... could those be worlds arms ??? they are!!!!! yipeee!!!!
i will eventually stumble on a rpm...

Being a big fan of the Losi XX, I was never really into the RC10 buggy, until you guys made a fan out of me with some sweet RC10 (Old is New) buggy builds, I had to have my own copy of those cars. After some research, and bugging some of you guys on...

Well, here is a TQ10 project I have been working on. Picked it up off of the bay a while back. It was in pretty rough shape when I got it. and decided to go in a little different direction, as the front of the chassis was pretty shredded. I decided...

According to Curtis, there were many cars sold out there that we refer to as the Early Edingers. The kits with goodyear tires, notched pistons, early speedo's, light gold anodizing, etc... and with all of the features making them early Edinger...

Picked this up on the bay for $49. Hated to do it but painted the beat up chassis. Found a GREAT site- to make white parts whiter :wink: And here we are so far. I'll keep you posted as i move along with this.

I have been searching everywhere to find an exact answer i am looking for. Team car rear arms using the b2/3 CVD kit, do i need to use b4 axles or are the b2/3 long enough? Are b4 axles used to get more drop out of it or is it just needed. Also what...

Some of you know that my Dad has a room in his home devoted to Team Associated RC history. I shot quite a few pictures one evening with the intention of doing something with them, but it never went anywhere. He expressed an interest in putting them...

Was anyone making repros of the original rectangular Thorp aluminum wings? I thought I had seen someone somewhere that was replicating these, but now I think my memory is letting me down.

I'd love to find an original, but they just don't come...

Hello all

This is my first post.

A month ago I brought a 1990 team (B chassis, PINK!) which im doing a resto on.

Ive got a budjet of $30 (or £20 in my money :) ) to spend on parts this month.

I was thinking of some new rims as shes sitting on...

Here are the Drill Or Not To Drill for Stealth & TQ10 Updates,Like-R-Not :roll:

Guys,

Im really stuck and know the only place for help is here. Ive been given an RC10 B3 to convert to a B2 (its a better car on high grip surfaces) to use at the next Petit RC event in January next year, but ive got rear end problems that has...

I just got a vintage team associated RC 10, it all seems to work ok, but i noticed the front arm is broken. Is there a good spot to look for parts other than ebay? I looked there and they want 5.00 for the arm and 20.00 to ship it, which is...

I have searched and failed so can anyone point me to the right one?

I'd like to try a set of these: (sorry, don't know how to link the pictures from the bay)

but with which one of these?

1.
2.
3.

or should I just not bother and go with one...

I'm going to list my RC10 FrankenT on ebay but was curious what chassis it has on it. I think it's a buggy chassis converted to truck use, based on the age of everything I got in the lot (approx. 1987 or earlier).
If I have this info when I list it...

Hey guys here's a quick pic (in poor lighting :) ) of the current status. The front tires are temps. They are Traxxas ribs that are simply GIGANTIC and look silly. There's a stealth transmission bolted on there too along with MIP CVDs :)

After sitting in a box for about 18 years, I recently got inspired to ressurect my Team Car.
Thanks to the posts here, I did the B4 slipper upgrade, the traxxas ball bearing steering upgrade, found some 2.2 wheels and put some new tyres on and then...

I just recived this in the mail - purchased it off of craigslist in L.A.

Needed the pan, shocks, and speed controler. There is what I am trying to upgrade, purchased it for $60.00 of craigslist before I knew anything about RC10's.

I guess...

Early car, all new built with all NIP parts except front tires :? :lol:

Early car with milled front( should have the 4 hole ) and rear towers, early tranny brace, and early ball cups and 1st gen carbon fiber chassis zzz early 6036 002.jpg zzz...

I finally got around to starting another build, but I'm having a problem. I'm trying to put a Fibre-Lyte battery brace on an AE graphite chassis, but it doesn't fit right.

The brace is too long to fit under the rear bulkhead when on the front...

Hey all,

Anyone know exactly what the Hot Trick shock towers were used for? What I mean is, were they ment for oval cars, or just as
replacements to the original towers. I know they lower the car a bit (which would indicate oval), and the rear has...

Found this for a song in Burbank. Looks like it has technacraft turnbuckles, houge bellcrank, some weird shock towers I don't know, cvds, an interesting washboard like motor heatsink, carbon transmission brace, RPM gear cover and a Novak 410-M5. It...

Seeing the progress Johnny and Miguel (and others) have been doing lately with their carbon RC10's, it has inspired me to complete mine, well almost (I need a servo saver and some decals). I picked this one up on the bay as a parts car for an...

Hi guys, My name is Neil. Some of you might recognize my username from TamiyaClub, as I certainly have noticed a few names over here :)

I would like some help identifiying my used RC10 so I decided this would be the best place to ask. I acquired...

This is a love/hate kind of car. I've shown the car before but i ve done a few mods to it recently and thats where you will love it or hate it. It started as a new in open box 6030 graphite that I assembled to box art specs. It lasted that way a few...

Many of you have followed my Custom RC10 thread and I thank everyone for there support on this car. Here are some action pics I snapped...not the only thing I snapped either.

I was on my way to a well site, I work on the rigs, so many long dirt...

I must have been going through a dumb phase in the early 90's. First I totally strip down a RC-10 buggy down to every nut bolt and screw for no reason at all, and next I engraved my initials and Social Security Number on the side of the Gold Pan. Is...