This is a tribute to the great line of RC10 buggies produced since 1984-2009 (RC10 - RC10B4). This is a work in progress. It will take some time and help from fellow members, as we all learn new things about the different versions. So please be...
Snapped a pic today of the runner that I got recently. I bought it from a scammer on another forum (as I found out when it showed up as a roller with not much else working) and ended up having to get some new electronics from civilguy here on this...
Last post
I've had good luck with the Traxxas 2070 servo in my RC10 runner. Not expensive either- you can get them under $20 shipped on ebay from the Traxxas strippers. :wink:
Thought I would get this guy back up and running. I used to love this car back in the day, it was my cousins car. Well, long story short he let me borrow it and then he got a divorce from my cousin and never saw him again. This was 14 years ago, his...
Last post
For as long as I can remember the tires were that way. The car has not been driven in 14 years. This may actually be the original tires from the kit. Who knows though. Lol
Robert
Is there any text left on the tyres ??
Not really. Only on the very...
Is there any special period cars these tires were used on or just replacements for all the 2 3/4 wheeled RC10's? IMG_7511.JPG IMG_7514.JPG
Last post
should fit a Tamiya Holiday Buggy rim by the inverse of the relationship of the early RC10 wheels designed to fit the Holiday Buggy tire popular for racing.
I was envisioning a 4wd RC10 with a vintage transmission somewhere near the middle of a vintage AE chassis so that you could somehow use the B44 front and rear gear boxes and shafts. I would like to see vintage...
I bought this on ebay for what I thought was a very fair price. Anyway when I asked him if he had the original tires and wheels he said. Its been so long I thought those were the original tires and wheels did I stumble upon a great find? They look...
Last post
If you never hit curbs or bottom it out it will stay looking nice. I have an Optima Mid that I ran on cement and carpet. I bet I went through 12 sets of tires and then put it away. It still looks darn near new. It is worth a try though to see if he...
I never see many of these here, so-------------Smoke if you got em', and show them off!
2 of my 3, resto's on all comming soon............
Last post
Thanx ya this car halls A$$...its a fun runner. I have done wider windows since my first protech edinger car i got new and raced. It makes for a smoother body line on almost every carlosi to kyosho iv done. I like the mirage more only for the higher...
Well I was out of RC when the B3 was out. I have restored a B3 and now all thats left is to paint the body. My question is does anybody have scans/pics of Pavidis/Masami/etc. so I can do a little replica work? Thanks in advance guys! :mrgreen:
I had been racing for about a 2 years campaigning a frog then a wildone and finally with a Fox. The fox was competitve but the few who had just bought the new RC10 were just decimating everybody on the track. Luckily my mom came to one race and saw...
Last post
This is a great story Ruffy and it took me back to my story. :D
I remember when I was a kid and some older kids that came to visit my neighbor brought with them a Hornet and a Grasshopper with shiny 540 motors and I fell in love with the hobby. I...
First of all, I want to apologize if this has already been addressed in any other threads. I did a search as best as I could, but couldn't find anything. I also looked on Ebay completed auctions, but was unable to find an exact match.
And I also...
Last post
Box whore!
Guilty as charged.......................... :lol:
Well....... at least your not a whore box! :lol: :mrgreen:
Hello to all… I’m sKott and I have always had to have something to piddle with. Nothing too major, but I need to have something to build to keep my sanity. Back in the early 90's I bought and built a RC10 Team car and had a blast with it. The only...
Last post
After my trip to the local hobby store, it looks like the battery is fine but the speed controller needs to be replaced. Anyone know where I can get one New or used (Futaba 210CB) on the cheap?
I thought I would try my hand at welding a pan. This thing had 4 huge holes in it, and two extra holes. They are gone now. Got them mostly ground down, and need to mill it all flat. I didn't take good before shots like I wanted to, but here is an...
Last post
Well you can decide if you are going to run an ESC, that would take care of 6 holes. Then decide how you are going to mount the battery and what size servo. I think it would look really nice, just don't forget the antenna :D
There is so much valuable information about the history of the RC10. So much of it is on RC10 talk. The problem is that many sites or forums don't stay around for many years. The RC10 has a Wikipedia page , but its pretty barren of info. I added the...
Will they work in the 2,25 tranny or the B2 tranny ?
they look similar and I know that many of the DuraTrax parts were relabelled RC10 parts
Idler Gear and Shaft for the Duratrax Evader EXT (B2)
Topshaft w/18 Tooth Gear Duratrax Evader ST....
Last post
They might. I remember reading something about that only the other way around. It was about using Associated parts to make the Evader gearbox stronger. So I would guess that it should work vice versa. Actually most of the Evader series are old Losi...
Anyone have any info on this body?
I have a brand new one with the Jammin J-204 raised in the back scrap area, but without the header card, just in a bag so I think either Jay may have sent me one to try or one was sent to me in error; but I can't...
Last post
Yes definately meant for the XX.... but I guess it would fit a Pro/SE?
Here's one on Brandon's car in the Losi section....
I remember spraying one up BITD for a friend, as you say marui-hunter, its almost identical to the Xcellorator, but i'm...
Well found a nice on on e-bay and found out the guy lived blocks away! Shot him and e-mail and picked it up a couple hours later. Car was only ran a couple times and then stored away. Everything is in great shape except the rear bulkhead, but he has...
Last post
I was supprised about that too. The only white parts on the care are the servo mounts. Other than that its all black. I put a good size order in on tower and found some parts on e-bay as the graphite rear tranny brace was modified slightly. I should...
The Winning Edge with Jammin ' Jay Halsey .
Featuring designer Roger Curtis . Plus ;- Gene Husting , who designed the tyres and some other things, plus motor magician Mike Reedy.
here's my...
Last post
Is there any where else that I could find that 1990 RC10 video you refer to ?
Here's something I noticed today while digging, different labels on the ends of a couple RC-10 boxes. I am used to seeing the printed label on the ends of the boxes, but I have one (maybe more) that the information is actually printed (stamped)...
Last post
Wow, you have hit gold :!:
Don't start building :lol:
Nope, she'll stay in the box for now. I'm thinking I have struck gold also! The only problem is that some of the bags in the kit have been opened, hopefully nothing is missing. I am missing...
Was just dosing on the couch and was thinking of the 4X4 conversion for the RC10
Now I do not remember the belt drive version?? I first seen the conversion in Texas 85-86-87? was a flex shaft coming off the tranny and going to the front drive!...
Last post
Cable drive, did somebody say cable drive? All I have left from the cable days is this front gearbox. Note the square drive in the center of the top gear. The funky part was the front driveshafts. Or should I say hooks. Wire hooks that were bent in...
Which kits came with universals or CVD's? I have the two pictured here and was wanting to put them on a period correct car. I have one of my CE's (I believe it is the later version) and was wondering if one would be correct on it. Sorry for the...
Last post
What's wrong wit U Willis?
hey, i'm allowed to have a brain fart every once in awhile. :mrgreen:
Ewwww, those stink worse than Lex's Kyosho farts
Hi folk,
This is my first post in RC10 forum. I like to share my RC10 photos to you. This RC10 was bougth from eBay 1~2 years ago. It cost me US$350. And I also bought a painted body for it from RACER8388. I really like his painting. His painting is...
Last post
The body is a Sidewinder, originally used on the TQ10...
Hi all. I am completely new to the AE RC10. I fell in love with this buggy back in the late 80s, but had no way to afford it. I had to settle for a Cox Bandito at the time. It even had the Kyosho name on the bottom of the pan. After reading the...
Last post
scr8p thanks alot for that post (dont know why i just saw it now) how did you find that???i always wanted to find pics of the car used in the movie but no luck ... you made my day
does anyone know of any company or any place to purchase aluminum turnbuckles in various sizes, yet have a consistent look to them (like lunsford sells all sorts of sizes and are consistent with look to them)
i know ebay has like 50 billion...
Last post
Try shorter using long rod ends and shorter turnbuckles.
I just received my new Novak 4 and receiver. In looking at the esc I noticed 2 wires red in color that come from the same place as the switch. They are bare on the ends and they is a small piece of shrink tubing on one of them. Looks factory to me....
Last post
according to my novak booklet, leave apart until 7-10cells is used. :)
There not going to re-produce the 4X4 kit! So can we use something else?? From another car? Scab one together? I seen a kit go for way to much on the bay and there is a car on there now with this setup missing teeth in belt, Belt stretched, and...
Last post
you'll have to use the topshaft on both sides or the center shaft on both sides: those have to turn inthe same direction. OTherwise your front and rear will just fight eachother.
is this a composit craft conversion? I got it in a trade and want to sell or trade it but would like to know what it is and if possible what kind of price it may bring. Thanks for any help.
Last post
It has the RPM Worlds suspension conversion kits on the front and rear as well.
I'm looking for suggestions from you veterans with regard to the netting used for the windows on replicas, what are you guys using for something that looks like the box art RC10 body, where the netting is straight up/down and side to side?
Thanks...
Last post
on the original RC10 they used window netting from a super champ/Hotshot. As you can see by the detail its twisted and looks smoking rad....
Got this car back in the day from my uncle and it sat in the closet for many many years. Recently I began to rebuild it, basically everything is stock except for dying white parts black
I'll let the pictures do the talking :P
Last post
Yeah I have aluminum adapters for those pan car wheels that fit the rc10 axle size
Well, I threw a bid in on this car--and just forgot about it, figured I could salvage a few parts off it for one thing or another. And of course, I didn;t expect to win it with the bid I had in-
Turns out that this little bugger needed.
New rear...
Last post
Really, and this is odd for me--I kinda like the scratches on this one. All the parts are pristine it's like someone built it, took it for 1 run then forgot about it.
I was a little worried one I realized I won it ( :oops: 3 days later :oops: ) but...
Im not sure which section this may belong in so Im going to start with the RC10 buggy section.
Basicaly I have a 'WORLDs' alloy tub RC10 with all black nylon parts and want to swap them all out for white bits. (Is this a sin?)
If there is anybody...
Last post
Well, sorry but I can help with my opinion only. I have a black Team car with white parts and I love the contrast. I also have the Team car in black parts and it does look kida stealthy. I do not have the parts to swap you. If you have the means and...
I have an A chassis gold pan. I would like to know about interchangeable parts from later models that were introduced by Associated that would work for my car. Specifically: bearings, wheels, drive train, steering, etc.
Last post
Thanks Steve. I also go this graphite rc10 that a friend gave me way back when. It's got a MIP trans dyed parts (yuck). It has fat tires, Twister motor and Novak esc. I think this may be a stealth trans. What do you think?
I just got junk off of eBay. I once had an A gold pan in 1982. I'd like a shelf queen but I like to run stuff. I will watch my grandson smash this car, but I will learn him better. I will Frankenstein the gold pans and post the pictures. I will have...
Last post
Easy, time travel! I was wondering about batteries for my cars. Not for racing, just backyard fun.
Hot tub time machine?
Don't spend too much on 'basher' batteries; don't go cheap, but it's better to get several mid-range packs than one really...
I want to know who's sticker use on the roof of many Cliff bodies ,the red and black stick after the antenna...:
The pic is an RC10L car, but he have on the RC10, the 870C...too.
Last post
i have a kind of better pic of jay Halseys yz10 from the aussie worlds with the same sticker i will try posting it but otherwise i'll just email it to you as i can never seem to post pics on here.
ps it says power under pressure if that means...
J Concepts reports on their Winter Indoors nationals race, and an RC10 makes the grid!!!
I noticed something so cool as we moved into the mains. In the 2wd stock class an RC10 was sitting 2nd on the grid. 1993 technology was looking good! If...
I was looking for Pro-Line B4 bodies, but all of them are discontinued.
All I could find were J-concepts and Associated bodies, anybody heard about new Pro-Line bodies?
Last post
If you guys are running the B4 I highly recommend the 4th hole shock tower and 1/2 degree hubs. We have been running the light weight setup for a while now and I'm happy to say, it works great! All my towers are hand drilled, but the new pre-drilled...
Hi, new guy here. I'm trey, in the Air Force, And live in Cheyenne, WY. Always wanted an RC10 when I was younger, never had the money for one though. I had a Futaba FX10, but it didn't fill the want for one. Got my RC10 today. Took a few years! A...
Last post
for the first time in my life, I have now driven an RC-10. Yup, 30 years old, and never had one. I finally got mine up and running today. Snow everywhere, so I just putted around the house. Only bought 1800mah batteries, and they dont seem to last...
I own a well used Graphite and goes very well. Im just curious that does the graphite 10 handles better or worse than the tub that was available at the same time??
From what iv'e been told they were the same. Hard to believe when the main...
Last post
Thanks to all reply's
Its very interesting to read what team drivers thought.
I will post pics when i learn how to.
Its a old clunker runner thats a x vintagracer buggy. It really is my work horse but it never dies. As metioned the shocks are...
I have a box (Cadillac) and it is printed on the top and sides BUT there is no printing on the ends??? This did not have glue on end covers as there is no glue residue or anything else on the ends. Did they print the top and sides and then glue...
Last post
This did not have glue on end covers as there is no glue residue or anything else on the ends
and that is why your labels have fallen off...................very common for the glue to completely dry out and disappear. there is also the chance that...
hello, here is my custom A&L RC10. I made some of the parts (front and rear shock struts, tranny plate, motor guard) because I don't want any black part on it.
I put a protech body on it because it has a high roof (A&L rear shock tower is...
Last post
That is an awesome looking buggy. Don't know why but I love the old school look of fiberglass.
Spent some time at the track today. I was going down the front stretch when all of a sudden my car quit moving. I must have broken my rear arm mount on one of the jumps.
im000336.jpg
Now the search begins for a replacement.
ED
Last post
I have broken 2 left side ones in the last year! Boil them (or any other nylon parts) in water for a good 20 minutes and the will be much stronger!
First:
I always forget to start a thread about a build until it's almost done. So here are some pics of my almost completed gold pan runner.
g1.JPG
G2.JPG
Nothing much. A&L Steering, Proline wheels, AE 6873 tires front, AE 6823 tires rear, ball...
Last post
Yup, the T2 was really a very mild variation of the 10T; the only different parts were the chassis tub, tranny, and rear bulkhead. The entire front end except for the bellcranks was exactly the same, the suspension arms have the same dimensions, and...
I'm converting a buggy to b4 wheels and I have some rpm arms that I believe are the andy arm length and need to know what cvd to use and outer hub? I think I can use the b44 which is what they use on the klein arms but not sure if the rpm are the...
Last post
Thanks alot that what I thought but just wanted to make sure.
gonna set it up racer-style like the stinky pinky. if i ever get to it... :wink:
just what i was looking for, but had to ebay it for 66 bucks. about twice what its actually worth. if you were one of the competing bidders you can thank me now,...
Users browsing this forum: Seznam [Bot] and 42 guests
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
Seznam [Bot] and 42 guests