RC10Talk - The Net's Largest Vintage R/C Community

HEY GUYS sorry for repeating this but I hit the send befor I was ready and found a couple of mistakes . YUP even your OLD Rustbucket screw up .;-)

Hello. OK IF nothing works after you do what has been sudjusted I have a feeling what may be going...

:shock: WOW, your stuff always looks good, but those tecna's make it look sweet :wink:

I have a couple of blue shocks if ya need 2 more 3.25 eye to eye. JohnnySr.

:shock: , ---------- 8)

good idea to put a mid-motor transmission on the short wheelbase: should help to keep the front tires in touch with the ground.
If you can : flip the servo over and mount the ESC across from it. That's a heavy piece you'd rather keep low in the...

E-clips are 1/8 .....easy to find at any hardware store.

Some progress.....body painted and mounted, still need a wing.
Swapped out the motorplate for a black LiteSink, hope to locate a blue one one of these days.
Also need to find proper rear tires and install one of the Revtechs I recently scored....

I use it everywhere im kinda internet legend

Huh.....first I've ever heard it...... :lol:

Since you appear to be the one to most recently run/race one, seems like you have a new action Mr....... a how to thread.

Yeah but the thing with Darryn is ..... he's a freak on the race track! Seriously he could run any car and still amaze...

thanks!! there are blemish's and a few runs and mistakes but at least i can say i painted them anyway! you can see the imperfections when looking closer but getting better with each body! i was going for blue with red flames and white but backed the...

Good to see you building again. I bet it's fun to open up those new bags of parts and finally see that beast come together.

I dig it, I would do the custom works wheels personally. Here's the details on how to make the CW wheels fit properly.

Yeah, one was anodized in a separate batch than the other. The same question has been raised on the anodize tint grade to associated, and as far as I can recall, there was no intention on the shade of gold. The color simply just differed depending...

With or whithout airscoop ??? :lol:

:lol: :lol: :lol: :lol:

Lots more done today and i must say this has been great to build. I installed new RPM ball cups today only to find that the ball cup on the shock tower and the inner ball cup mounted on the steering rack hit so i need to order some stock associated...

josh i have a chassis for that gt, but its black....... nice gold pan too :mrgreen:

love the gold pan!!

hot shot looks great too,

man thats a nice gold pan! them parts look nice and white to me, i got a 98%minty fresh tub , but the nylon is yellowed up, tires are brand spanking new never used. down here in hawaii, the parts yellow very quickly , the nylon was a decent white...

right here

two 6 x18 sheets per pack 4mil thick for $4 per pack. toss me a pm if you would like some.

if you do that, make sure you use some kind of light grease on the gears, since the trans will be all metal.

thanks im gonna add them to my Avid order tomorrow.

Man...that looks nice.....

I'd love to DYE those fresh, white parts.... :mrgreen:

When do you plan to finish it Dr Oetker !

I think in February it will be finish :roll: but before I must find a lot of parts :(

thanks.

Dang all mine have the stealth. :cry:

So you parted out the sand rail and you are building a snow cat or Snow-C-10! I got it!! :D Or maybe not. Looking forward to it what ever it is. -B

Murphy those cars are awesome. Seeing all these beautiful cars makes me antsy to finish mine. :mrgreen:

It is cold outside! Today was a good day and do inside project so I picked this back up and cleaned...wow what a difference. Still don't know exactly what I have but it doesn't look like it will take much to get it good. Tell me what you would do,...

looks like a team car with worlds pieces, explains the u joints, 2.0 rear wheels and non machined chassis tub.
thought the worlds car came with u joint driveshafts?

junkman,
PM me, I was just cleaning out and sorting my junk fastener bin and found a pair of them.

Yeah i saw that that about two weeks ago and said the same thing.I can do the same thing at work for free.I have purchased a couple of items from them and they did arrive as advertised.

Just an FYI - I ordered a pack of those stand-offs from Sheldon's and they are the same 1 ones used on the RC10 chassis. All 6 are tapped for 4-40 screws.

i dont see any time soon the b4 being phased out till the b5 is due even then you will beable to find parts and kits for a while longer. just like u can find a far amount of b3 parts still.

I was going to say, if I am marshaling a race you are in, I'm waiting until your car comes to a stop before I get it; no catching-and-release here LOL

Thanks ace028, I am looking forward to seen you Ultima. The last thing on this Buggy is I adapter a modern RC10B4 dust cover. I am running a B4 slipper clutch so I adapted the dust cover.

:mrgreen:

so your holding that a&l rack for me right? :lol:

welcome.. its nice to see pretty much a virgin car. I always wondered what the front tires looked like when new.. Mine are bald..lol.. They are bald since i can remember..
robert

I'll post a pic if needed, but you notch the diff rings at the inner lip, then drill a hole on both alum diff halves at the same point, insert the same size roll pin (needs to be cut flush with the diff ring)
and wala!
i would love to see a picture...

The car looks awesome.They looks so good naked,i just like the way machinery looks. 8)

new stock motor plates are long gone ...try to find 1 on ebay

$50 or so later, I have a FT screw kit coming, along with all the parts I could buy to make the front end basically new.

it's for the internal voltage regulator. read step #4:

PM sent. :)

Here is what I have.

Tom, great to see you made it over here. I was digging through my boxes the other day and found a white battery cup (and other assorted AE related parts). Its yours if you want it, shoot me a PM and we can figure out how to get it to you.

Get that...

that goldpan with the holes sure does look purdy :wink: .....

oh I've got some better than that! thats a heavy weight!

The bug body is a parma.

heres more pix but this time ill use a photo gal setup. smaller page usage.
some internal shots and finnished body.

ahh damm its even got an rpm rear shock tower!!!! i need one of those so bad!!!!!!