New Composite RC10 buggy.....

[Md_RC10]

I found what I believe is some sort of Composite RC10 buggy on Ebay.
Anyways I purchased this buggy and I will begin trying redo a couple things to get it up and running again.

I did notice during my inspection that there is a thin metal plate sitting between the chassis and the Stealth transmission.
I'm guessing that this is sort of BS modification.

[vintage AE]

I bet the metal plate is the "template" that people used to drill hole from a 6 gear tranny to a stealth tranny. For some reason, who ever driller the new holes didn't remove the plate and just screwed the trans on top of it. I would remover the plate and screw the transmission back down.

[DaveM]

Should be a good project!

[Md_RC10]

Should be a good project!

Thanks DaveM....

I pulled some stuff off the chassis, including the transmission.
Trying to get an idea of what I want to do with the chassis, pretty sure that I want to get rid of all the dyed parts at this time.
I need to start a parts list.....

Unknown on brand of shocks I have here, I'm definitely keeping the Andy's Arms front and rear...

[DaveM]

Hi,

I am doing a similar rebuild of a graphite buggy, here is a link it may give you some ideas,

https://www.rc10talk.com/viewtopic.php?f=35&t=40536

It is what someone called a zebra buggy, a mix of black and white parts.

I would try to keep as much as original as possible.

Maybe change out the front and rear suspension mounts, front caster blocks and rear hubs to white,

and re-dye the rear bulkhead black.