Will rc10 3 degree rear arm mounts work on an rc10t?
-
- Approved Member
- Posts: 125
- Joined: Mon May 16, 2016 7:19 am
- Location: Rome, Georgia
Will rc10 3 degree rear arm mounts work on an rc10t?
I'm about 99% sure the answer is yes but the seller couldn't say for sure... I bought some rc10gt blocks a few months back that I was told would fit but apparently they are slightly off to mount on an rc10t.
- scr8p
- Administrator
- Posts: 16514
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 28 times
- Been thanked: 948 times
-
- Approved Member
- Posts: 125
- Joined: Mon May 16, 2016 7:19 am
- Location: Rome, Georgia
- jcwrks
- Approved Member
- Posts: 526
- Joined: Wed Jun 21, 2017 3:40 pm
- Location: San Angelo, TX
- Has thanked: 119 times
- Been thanked: 240 times
Re: Will rc10 3 degree rear arm mounts work on an rc10t?
FYI Robinson Racing has 2.5 & 3.5 degree mounts in black. If color is not an issue then the re-re parts may be easier to acquire.
The official TX SKUNK
-
- Approved Member
- Posts: 531
- Joined: Sat Jun 24, 2006 6:41 am
- Location: Herrenberg, Germany
- Has thanked: 27 times
- Been thanked: 62 times
Re: Will rc10 3 degree rear arm mounts work on an rc10t?
Where are the 3deg usually applied?
In the Arm mounts
or
in the hubs / hub carriers ?
What Part numbers do I have to hunt for?
Thanks, Tony
In the Arm mounts
or
in the hubs / hub carriers ?
What Part numbers do I have to hunt for?
Thanks, Tony
*** POWDER - KING ***
-
- Approved Member
- Posts: 1254
- Joined: Sun Mar 09, 2014 10:43 pm
- Location: peoples Republic of Australia
- Has thanked: 750 times
- Been thanked: 26 times
Re: Will rc10 3 degree rear arm mounts work on an rc10t?
Hi,
The re-release arm mounts are 3 Degrees, ASC 6360, same toe in as the originals on the 10T Team Truck.
https://www.towerhobbies.com/cgi-bin/wti0001p?&I=LXDSXV&P=7
The Worlds rear hubs are 0 degrees, same as the originals on the 10T Team Truck, ASC 7364.
https://www.towerhobbies.com/cgi-bin/wti0001p?&I=LXEDZF&P=7
The re-release arm mounts are 3 Degrees, ASC 6360, same toe in as the originals on the 10T Team Truck.
https://www.towerhobbies.com/cgi-bin/wti0001p?&I=LXDSXV&P=7
The Worlds rear hubs are 0 degrees, same as the originals on the 10T Team Truck, ASC 7364.
https://www.towerhobbies.com/cgi-bin/wti0001p?&I=LXEDZF&P=7
-
- Approved Member
- Posts: 124
- Joined: Wed Feb 10, 2016 5:26 pm
- Location: Staten Island
- Has thanked: 1 time
- Been thanked: 7 times
Re: Will rc10 3 degree rear arm mounts work on an rc10t?
Did Associated change part numbers and possibly the specs on some parts?
According to the original 10T manual:
rear mounts, part # 6360 (does not specify degree of toe in, but Google pictures shows 1.5 deg on older packaged parts)
rear hubs, part # 7358, 3 deg of toe in
On my 10T, I have 0 deg mounts and 3 deg hubs. Attached is a picture of the spares I have, notice the part number on the mounts. That is what is now the rear hubs.
According to the original 10T manual:
rear mounts, part # 6360 (does not specify degree of toe in, but Google pictures shows 1.5 deg on older packaged parts)
rear hubs, part # 7358, 3 deg of toe in
On my 10T, I have 0 deg mounts and 3 deg hubs. Attached is a picture of the spares I have, notice the part number on the mounts. That is what is now the rear hubs.
- scr8p
- Administrator
- Posts: 16514
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 28 times
- Been thanked: 948 times
Re: Will rc10 3 degree rear arm mounts work on an rc10t?
The original 6360's are 1.5. The re-release 6360's are 3.
-
- Approved Member
- Posts: 1254
- Joined: Sun Mar 09, 2014 10:43 pm
- Location: peoples Republic of Australia
- Has thanked: 750 times
- Been thanked: 26 times
Re: Will rc10 3 degree rear arm mounts work on an rc10t?
Hi,
Team Associated made running changes, they also recycled some part numbers just to make things confusing,
and there was optional rear mounts and hubs.
ASC6360, 1.5 degrees rear mounts are in the #7001 kit.
ASC7363, 3 degree rear mounts are in the #7035 Team kit.
Team Associated made running changes, they also recycled some part numbers just to make things confusing,
and there was optional rear mounts and hubs.
ASC6360, 1.5 degrees rear mounts are in the #7001 kit.
ASC7363, 3 degree rear mounts are in the #7035 Team kit.
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4 Replies
- 481 Views
-
Last post by RCveteran
-
- 7 Replies
- 703 Views
-
Last post by Mark Westerfield
-
- 41 Replies
- 4572 Views
-
Last post by DaveM
-
- 5 Replies
- 632 Views
-
Last post by tony6187
-
- 160 Replies
- 11491 Views
-
Last post by SnoopMaxx
-
- 2 Replies
- 634 Views
-
Last post by foots
-
- 3 Replies
- 908 Views
-
Last post by LemonC
-
- 7 Replies
- 681 Views
-
Last post by JK Racing
Who is online
Users browsing this forum: No registered users and 3 guests