I'm trying to piece together a tecnacraft kit and am unsure on sizes... was getting varied numbers and I'm nowhere near my truck either so no opportunity for me to measure.
the original 6 turnbuckles for the camber and steering were a 7253 which is 2.62"
The steering link is a 7251 which is 1"
The servo to bellcrank was a 7252 which is 1.65"
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas Factory Works website
After a bit of searching, I'm still coming up short. Can anyone give me the original RC10 and B4 turnbuckle lengths? I'm going to use the 3.5mm set, and can't seem to find the proper info.
Does anyone know of a modern Titanium turnbuckle kit that I can use on an RC10 (stock wide front arms and stock rear arms) that I can still purchase and find replacement turnbuckles if I need to? I'll be using the innermost mounting points on both...
Last post
Actually, by the looks of it the front setup you have is what I could use too. So any idea what lengths all those lengths are or what you bought?
Sorry Keith, they're FT replacements for a CE or Team car. I've not measured them, they used to be...
So I finally got my Graphite runner on the track yesterday, and ran my first lap in almost a decade... Got cocky pretty quickly in lap 2 and managed to completely snap a turnbuckle (right rear). The Dubro ends held up great, and everything else was...
Last post
That really depends on what color turnbuckles you want. Durability should be the same.
Building a mid motor oin RC10 and trying to figure out what dogbones I'll need. Mounting things a bit differently (trans in a slightly different spot/longer arms etc) so it's not as easy as swapping to a B4 bone for example (or maybe it is idk their...
Last post
Anyone have a chance to measure anything? Specifically the B4 dogbone?
Thanks
Can anyone tell me the approx. lengths from eye to eye of these shocks?
Also is it really true that these fit all the following traxxas models - i.e. are the stock shocks of all these models literally identical? Saw this list on an ebay posting....
Last post
Yes, all those cars really use the same length shocks.
The fronts are roughly 3.5 and the rears are 4 .
I was wondering if somone can give me an idea of the different arms available to use on an RC10gt that I'm building a late model dirt oval car out of. I was going to use rc10 wide track front arms which measure at about 2 from inner pin to outer...
Last post
you can run the custom works wheels with the gt hub carriers but you have to run the c/w .125 spacers. or you can run the B4 hub carrier with or without the spacer. Currently I have it mocked up with RC10 rear arms, B4 hub carriers and axles that...