Hey guys! What are you using for shock pivot balls for the Team Cars? Are you using the newer Associated versions, RPM's delrin pivots or just finding new old stock on ebay? Which one do you like best?
well, last time i checked, you could still get the old metal ones from tower. or, you could use the rpm ones. if your gonna use the rpm front arms, you need to use the shorter, newer ones.
I have been looking for some replacement pivot balls for an old Bullet I am trying to get to running condition. Originally these were available as Traxxas part number 1642 which included both the pivot balls and rod ends. This part number is no...
Last post
I believe the 1942 set has the four round shank ends for the shock rods as well. They fit the underside of the spring cup and are slightly shorter as well. The balls in the 1942 kit fit the older style white and gen2 black rod ends. As previously...
Hello! Does anyone know, or can anyone with a Cat XLS re-re take a measurement of these ball studs?
Are the balls 5.8mm diameter?
Thanks in advance! Cheers!
Trying to build up a heavy duty front end for a 7035 truck from extra white nylon parts. I tried to use a common shock pivot ball and it won't fit in the arm mount slot. I know there are are 2 or 3 different white nylon arms. These are the thicker...
Last post
Found a couple RPM derlin pivots I'm going to try. Thanks for measuring them to compare.
i got 3/32 dif balls for the diff gear in the original stealth tranny is that right?they seem to fit small and the diff rings when i tighten dont seem to be touching them just the gear itself.
also what lube am i suppose to be using the ae black...
I’d like to rebuild my ball dIff. I am pretty sure the RC 10 came with 1/8 inch balls. Is there a modern replacement for these? I have a new set of rings. Thanks in advance.
Last post
I want to say it's 8 for 6 gear, and a dozen for stealth. 6 gear could have more if you used a kimbrough gear or one that has a ton of holes. but the original gear was 8 holes.
Yeah, I counted 8 on one of my 6 gear cars but don’t want to open the...