jumped on the losi waggon from kyosho
-
- Approved Member
- Posts: 398
- Joined: Mon Feb 18, 2008 3:54 pm
- Location: toronto canada
- Been thanked: 1 time
jumped on the losi waggon from kyosho
well i just picked up my 1st losi's ever .love the flat chassis losi's as they are similar to kyosho ultima's . ok here they are tell me did i do alright with the purchases?
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=140390440410&ssPageName=STRK:MEWNX:IT
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=140390461767&ssPageName=STRK:MEWNX:IT
figured i dont know much about them and my 4yr old son kept hawkeyeing my shelfers so we'll have a good bash session with the losi's .but they do look like in good condition but im not a losi guy. i always wanted a kyosho ultima based truck but figued i got enough ultima ,why not grab a losi truck/buggy
thanks all comment are welcome .as im in need of help perhaps some links to manuals as well
cheers
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=140390440410&ssPageName=STRK:MEWNX:IT
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=140390461767&ssPageName=STRK:MEWNX:IT
figured i dont know much about them and my 4yr old son kept hawkeyeing my shelfers so we'll have a good bash session with the losi's .but they do look like in good condition but im not a losi guy. i always wanted a kyosho ultima based truck but figued i got enough ultima ,why not grab a losi truck/buggy
thanks all comment are welcome .as im in need of help perhaps some links to manuals as well
cheers
2nd place is just the 1st loser
- bearrickster
- Approved Member
- Posts: 4372
- Joined: Thu Mar 06, 2008 11:36 am
- Location: Hollywood Maryland
- Been thanked: 8 times
Re: jumped on the losi waggon from kyosho
for the price I think you did well, they look fine. its hard to hurt a Losi. I have a extra jrxT manual and a NIP set of those wheels.
- highwayracer
- Approved Member
- Posts: 1187
- Joined: Wed Dec 12, 2007 9:43 pm
- Location: Illinois, USA
- Been thanked: 6 times
Re: jumped on the losi waggon from kyosho
Welcome to the Losi forum!!! You did well. The ultima front end was the inspiration for front the jr series.
If you or your son will be running the car/truck on the street, make sure you use a chassis protector on the bottom. The losi graphite will produce some really nasty splinters.
Good luck on the build!!
Regars,
highwayracer
If you or your son will be running the car/truck on the street, make sure you use a chassis protector on the bottom. The losi graphite will produce some really nasty splinters.
Good luck on the build!!
Regars,
highwayracer
-
- Approved Member
- Posts: 398
- Joined: Mon Feb 18, 2008 3:54 pm
- Location: toronto canada
- Been thanked: 1 time
Re: jumped on the losi waggon from kyosho
i got one of the trucks today.not bad condition.they came with nice alloy shock collars and the bottom alloy mounts as well. i could use a manual for the tear down and rebuild.
2nd place is just the 1st loser
Re: jumped on the losi waggon from kyosho
Looks like good prces on those. There are manuals available on line, or pm bearrickster, looks like he can set you up. Losis are cool because so many parts are relatively easy to swap.
Gary
-
- Approved Member
- Posts: 398
- Joined: Mon Feb 18, 2008 3:54 pm
- Location: toronto canada
- Been thanked: 1 time
Re: jumped on the losi waggon from kyosho
so i took one truck for a boot with some old green losi motor. not too shabby. im gonna toss my li po cells in it and a newer brushed motor. then a brushless mamba in it . will it hold up gear wise? my son is 4 and had his 1st attempt at driving. does losi make a 4way wrench like the kyosho ones? all my tools are for kyosho's .
its my 1st truck as well and its pretty cool. cant charge batteries fast enough for my son to go driving lol
its my 1st truck as well and its pretty cool. cant charge batteries fast enough for my son to go driving lol
2nd place is just the 1st loser
- Prince Steve
- Approved Member
- Posts: 400
- Joined: Wed May 06, 2009 11:26 pm
- Location: New York
- Been thanked: 2 times
Re: jumped on the losi waggon from kyosho
Ahhh..
How could you leave KYOSHO??
You got some good deals on those trucks.
I actually have a few myself. They r nice.
Enjoy them with your son..
How could you leave KYOSHO??

You got some good deals on those trucks.
I actually have a few myself. They r nice.
Enjoy them with your son..
AKA ( settin03 R/C hobbies and more ) on Ebay
Since being on this site I have found that I have too many parts and R/C Models. Please help me get rid of them.
Since being on this site I have found that I have too many parts and R/C Models. Please help me get rid of them.

-
- Approved Member
- Posts: 398
- Joined: Mon Feb 18, 2008 3:54 pm
- Location: toronto canada
- Been thanked: 1 time
Re: jumped on the losi waggon from kyosho
well i finally stripped the main gear inside the gearbox. doesnt loo all that bad but its jamming up. theres like two washers inside the gear it appears they are not centered . is this a factor.
if i was to dismantle the two truck to make one good one wich truck is better?
if i was to dismantle the two truck to make one good one wich truck is better?
2nd place is just the 1st loser
- Prince Steve
- Approved Member
- Posts: 400
- Joined: Wed May 06, 2009 11:26 pm
- Location: New York
- Been thanked: 2 times
Re: jumped on the losi waggon from kyosho
bdrmbully wrote:well i finally stripped the main gear inside the gearbox. doesnt loo all that bad but its jamming up. theres like two washers inside the gear it appears they are not centered . is this a factor.
if i was to dismantle the two truck to make one good one wich truck is better?
You see!! The Kyosho GODS r warning U!.


AKA ( settin03 R/C hobbies and more ) on Ebay
Since being on this site I have found that I have too many parts and R/C Models. Please help me get rid of them.
Since being on this site I have found that I have too many parts and R/C Models. Please help me get rid of them.

-
- Approved Member
- Posts: 398
- Joined: Mon Feb 18, 2008 3:54 pm
- Location: toronto canada
- Been thanked: 1 time
Re: jumped on the losi waggon from kyosho
i know lol and im totally not liking the way the gear box is set up compared to kyosho's lol had my fun they may have to be up for grabz lol
like i say i wanna take the best parts of the two and build one good one for my son and sell the rest off.
like i say i wanna take the best parts of the two and build one good one for my son and sell the rest off.
2nd place is just the 1st loser
- Prince Steve
- Approved Member
- Posts: 400
- Joined: Wed May 06, 2009 11:26 pm
- Location: New York
- Been thanked: 2 times
Re: jumped on the losi waggon from kyosho
I have a bunch or gear parts for them so send me a pic and I may be abe to help you. Free of charge.
( So you can have fun with your son - until the next one breaks
)


AKA ( settin03 R/C hobbies and more ) on Ebay
Since being on this site I have found that I have too many parts and R/C Models. Please help me get rid of them.
Since being on this site I have found that I have too many parts and R/C Models. Please help me get rid of them.

- tamiya_d1_junky
- Approved Member
- Posts: 60
- Joined: Mon Jan 25, 2010 11:22 am
- Location: Sunshine Coast, Australia
Re: jumped on the losi waggon from kyosho
As my name suggests, I WAS a Tamiya junky until I saw my first JRX2 Junior
- I am now on the Losi wagon and slowly selling my Tamiya fleet off to make room for more Losi buggies and trucks!! You can not honestly beat Losi for quality, style, and handling.... welcome to my addiction!!!




I LOVE VINTAGE!!!
- Mad Racer
- Approved Member
- Posts: 972
- Joined: Thu Apr 09, 2009 10:50 pm
- Location: Vintage at Boondal. Australia.
- Been thanked: 2 times
Re: jumped on the losi waggon from kyosho
Hey Conrad.
I hope to have my JRX2 5 link up and running by sat as well. Always loved it and is really a shealf queen but decided to run along with my new JRX2 Truck that would have been ready but the new body shell is no good. Waiting on another shell.
So i will have my Metal Hot Shot with a fully rebuilt Hot Shot 2.
Vintage Losi are great.
See you SAT.
I hope to have my JRX2 5 link up and running by sat as well. Always loved it and is really a shealf queen but decided to run along with my new JRX2 Truck that would have been ready but the new body shell is no good. Waiting on another shell.
So i will have my Metal Hot Shot with a fully rebuilt Hot Shot 2.
Vintage Losi are great.
See you SAT.
Vintage . Older is Better !!!!!!! Vintage At Boondal, Australia.
http://www.rctech.net/forum/australian-racing/548133-off-road-vintage-boondal.html
http://www.rctech.net/forum/australian-racing/548133-off-road-vintage-boondal.html
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 12 Replies
- 1071 Views
-
Last post by adam lancia
-
- 5 Replies
- 781 Views
-
Last post by LowClassCC
-
- 8 Replies
- 2437 Views
-
Last post by License2iLL
-
- 0 Replies
- 835 Views
-
Last post by splaice
-
- 4 Replies
- 775 Views
-
Last post by mrlexan
-
- 4 Replies
- 951 Views
-
Last post by tecnica2001
-
- 5 Replies
- 891 Views
-
Last post by highwayracer
-
- 5 Replies
- 1794 Views
-
Last post by lotus74
Who is online
Users browsing this forum: No registered users and 2 guests