I have the instructions tucked away in an inaccessible box. What was posted above are the instructions which are really rudimentary. Basically you need to play around with the placement of the front tranny which allows the dog bones to set in a natural position allowing the knuckles to turn but not be so stretched that it pulls the out drives from the main gear
Started with the basic idea of SRB, pretty much keep a tiny bit of SRB and some after market structural geometry. Plenty of custom made, CNC & hand made parts too.
Together also show my out of whack Mugen Bulldog lol ;)
I've had these thoughts swimming around my head for a couple of years. I've always wanted to combine a MIP 4-10 kit with a fully hopped up Rough Rider SRB chassis. I needed to do some R&D with parts to see if my idea would work. So before I start...
Last post
Blue and gold works so well... and that transmission is so mythical, this should clearly end in a BotY kind of final competition when done! :shock:
I am sharing photos of my MIP/Tamiya car as last raced in early 1985 in the Open class with a Checkpoint Gold motor. This was my very first RC car with the initial kit purchased from Tower Hobbies. I recall the price being $105.00 minus the...
Last post
Very nice,i would like to get me one of those long guards super cool...
lots of cool old stuff listed for crazy prices, but the MIP stuff isnt too out of line if you go off eBay pricing LOL
Last post
The JG part of that transmission case is just the mounts and motor plate. The case is from MIP. IMO hot trick made a much better mount from aluminum....
All I would use from the kit would be the case....not that it'd make finding one any easier....
Since it is not a secret that Tamiys is going to re-re the SRBs soon and a lot of SRB guys would not mind a 4wd conversion, I think we shall try to petition one of the aftermarket manufacturers to also develop a SRB 4wd conversion kit or simply...
Last post
Didn't the SRB 4wd use a speedo cable to power the front tranny. The ones I saw looked interesting but far from something I would want to invest loads of cash in just to have a unique piece. There's lots of other cars that interest me more. Just my...
In admiration of 1300GT's 4wd SRB, I'm starting on my own attempt at building a similar car. I figured out a B4 slipper gearbox setup in this thread -
Now I'm mocking things up for the chassis. 2 3D printed replica MIP gearboxes, 3D Printed front...
Last post
Its virtually impossible to eliminate bump steer on a trailing arm 4wd car as the steering wants to be in front of the gearbox , whole thing is looking really good .