I guess that this would be the most appropriate place to share this infomation.
I just can't leave stuff alone, so I've put my 3d printer to work making parts for the re-re worlds car I recently picked up.
Link to the files if you want them:...
Last post
I got those buggy wheels & tires from Amazon and dig them! Thank you for turning me on to them.The outside dia. of the tires are a little tall but that's ok. I found some 12mm hex adapters in my stash (stock ones from a TC4) that worked for now....
I am looking to get some parts printed in PCblend. I think I have one .stl file sourced already. But, another part I need is a variation/prototype version of what later became the production version. There is enough of a difference between the two...
Last post
Looking at the part, it looks quite easy to model... And a nice start to onboard within 3D design with Fusion360...
So I have an Ender3 V2 I picked up last Christmas. I have been using it for smaller functional prints and am curious about making some replacement parts for RC cars. I have been learning to design parts on Tinkercad and have found some on...
Last post
Fusion 360 is free for makers and should suit your needs as long as you aren't a commercial user.
With all the very cool vintage RC cars that I see in this forum, and with the trouble and expense that some people go to get them as good if not better than what they would have been originally, it occurs to me that with the advent of technology...
Last post
It doesn't have to be attached, there is a support material that is removed after the part is finished.
Hey guys, I saw some Lazer ZX parts that nave been designed on the 3D printing website Shapeways and was wondering if anyone's had any Optima parts done yet? I tried searching but nothing came up.
I think the most wanted parts for the first gen...
Last post
How is the plating on those?
The rims in the bag are genuine items. However the extra (wide) insert and (wide) inside rim looks to have been printed. They have a very unusual texture to them. Almost like they've been sandblasted.
This is my first attempt at 3D modelling and then 3D Printing a part , I've started with a fairly simple part , a front steering knuckle for a Yokomo Dogfighter YZ-834b , I thought i'd start with this as i need one and they are hard to find ....
Last post
The other thing is the only plain PA I have is a very soft one or fibre fill that I can't use in the AMS so I need to get some plain PA6 and bambu lab only sell fibre fill so ill have to shop around.
