which turnbuckles and stuff do i need for wide track A-arms?

Post by **pcrussell50** » Sat Jan 11, 2014 12:38 am

from this tower hobbies page:
http://www3.towerhobbies.com/cgi-bin/wti0005p?&I=ASCD6001&P=Z

can anyone tell me besides ordering the wide track A-arms, what else do i need to convert my stock rc10 gold pan to wide track? pretty sure i need longer turnbuckles at the very least, but i have no idea what lengths to order and tower offers too many choices to tell what i need.

thanks guys.

-peter

Post by **GoMachV** » Sat Jan 11, 2014 12:49 am

"Y'ernat Al" posted this reworked chart, this should help you with turnbuckles. Look at the team car lengths.

Assuming you are doing the tower also, you can go to the .71 shock set to help with travel. Those were the main differences...shocks, tower, arms, and buckles.

Post by **RC10resto** » Sat Jan 11, 2014 12:49 am

also this may help

http://www.teamassociated.com/pdf/cars_and_trucks/RC10/CE/10ce90_manuala.pdf

Post by **Y'ernat Al** » Sat Jan 11, 2014 1:00 am

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LX2529&P=Z

..and you can do the math on the chart to realize the turnbuckles and steering linkage is simply 3/8" wider on each side, so you could just buy some more 4-40 rod (support your lhs there), or a longer ball cup like losi's a6015 will do it too, although you probably sacrafice some strength/rigidity going that route.

Post by **THEYTOOKMYTHUMB** » Sat Jan 11, 2014 1:07 am

Y'ernat Al wrote:..and you can do the math

I can't!

Post by **Y'ernat Al** » Sat Jan 11, 2014 2:00 am

THEYTOOKMYTHUMB wrote:
Y'ernat Al wrote:..and you can do the math
I can't!

[youtube]rf3_36a9MWc[/youtube]

Post by **pcrussell50** » Sat Jan 11, 2014 2:17 am

gomachv wrote:"Y'ernat Al" posted this reworked chart, this should help you with turnbuckles. Look at the team car lengths.

Assuming you are doing the tower also, you can go to the .71 shock set to help with travel. Those were the main differences...shocks, tower, arms, and buckles.

Thanks guys. great info, especially ^this^ I didn't see the 0.71 shock setup on Tower's parts page though.

-peter

Post by **Y'ernat Al** » Sat Jan 11, 2014 8:12 am

http://www.teamassociated.com/parts/details/6433/

Me thinks this "low inventory" status will be changing someday.

Post by **scr8p** » Sat Jan 11, 2014 8:18 am

yup, .71's again. i saw them when the new parts for the classic were starting to come out. i was like.... hmmmm.

too bad they're not threaded.

RC10Talk - The Net's Largest Vintage R/C Community

which turnbuckles and stuff do i need for wide track A-arms?

which turnbuckles and stuff do i need for wide track A-arms?

Re: which turnbuckles and stuff do i need for wide track A-a

Re: which turnbuckles and stuff do i need for wide track A-a

Re: which turnbuckles and stuff do i need for wide track A-a

Re: which turnbuckles and stuff do i need for wide track A-a

Re: which turnbuckles and stuff do i need for wide track A-a

Re: which turnbuckles and stuff do i need for wide track A-a

Re: which turnbuckles and stuff do i need for wide track A-a

Re: which turnbuckles and stuff do i need for wide track A-a

Create an account or sign in to join the discussion

Create an account

Sign in

Who is online