So I'm looking to build a racer with a graphite chassis as a base. Ive got RCCW shock towers, trans brace, and battery holder.
This was the first car I actually owned so I finally got around to reviving it. Parts not listed were already owned.
Front Shock tower: RCCW
Rear Shock tower: RCCW
Stealth Trans brace: RCCW
Battery brace: RCCW
1/4" Polished UJ's: Ebay
Stainless steel screws: fastenal
Front Sway bar: Ebay
Bell Cranks: Jconcepts
Black re-re Motor plate: Tower
JP front bumper: ebay
Five spoke front & rear wheels: JC racing
Anaconda tires: Traxxas (I like the tires so dont bash)
motor gaurd: Ebay (will probably upgrade to a black one from RPM)
Robinson Racing RC10gt Idler
Aluminum Differential gear: Dhawk
electronics:
Castle Sidewinder 3 ESC
Castle 3800KV 4 pole motor (so much torque)
Futaba R603FS 3 channel reciever
Venom 7.4V 4000mah Battery
LHS LS-500 servo
As title says I have some questions on my build, pictures will follow.
What I have:
Graphite chassis (nose cut off, I got it like that)
RC10T nose plate
RPM wide arms nip all around (yes the wide arms intended for the rpm narrow chassis...
Last post
The nose brace rods will connect to my signature standing low profile servo mounts. That will be the only way to package a standard size LiPo or 6-cell battery.
I originally developed that design to fit 7-cell NIMHs without the hump in my RC10....
Halloween is my second favorite holiday (next to Christmas). This time of year begins my 8 month slow down for work (you can only work so many 12 hour days :roll: ).
My 5 year old daughter has been BEGGING me to take her to a haunted house so we...
Last post
well our halloween was spent taking two of our dogs to a local pet costume contest. my border collie kay-ak went dressed as a sheep and took first place. the prize was a $35 off certificate for any grooming service which covers most grooming...
Just another Alloy build in progress. All the extra parts from my first alloy build being put into another. I have an extra set of electronics but I want to put them on a graphite racer.
A lot of the parts are actually from members here so this is...
Last post
the build looks awesome. I would have one minor suggestion, that is to put some spacers in the shocks under the piston heads. shoot for level rear arms, and slightly above level on the front end. it will give it a more 'serious' attitude.
The same little shop I got my pro-x from also has a NIB On Road car that looks like a Formula-1 racecar. it looks like a F1 but it come's with a stock car body? if anybody wants it I can pick it up for you he wants around 200.00 for it but its still...
Last post
Let me know if anyone wants it? I dont. I looked at it and I liked the Pro-X more
So I need to make a bit of Christmas money so I am finally pulling my finger out and unpacking all my stuff. Last night after work I got out my Dog Fighter collection...
In this pic from top left going clockwise;
-Wonder Dog Fighter (earmarked...
Last post
I really need to get myself a digital camera so I can upload pics. The one I have is from the stone age :|
hello all, i have exciting news! i BELIEVE i have created the worlds first mid motor traxxas bandit check the pics, it be true. all it takes is a bandit, a dremel, a whole bunch of cutting bits, and some time. (btw check out my amazing hinge made...
Last post
bumps are full of little bumps within them, without bumps in the bumps they are not a bump!
So my kid has really been bugging me about racing with him so i ordered a new b4.1 FT worlds buggy, Novak GTB 2, Reedy Sonic 13.5, Airtronics MX3 sport and venom lipo's. Been awhile since i raced but im looking forward to it and my son is really...
Last post
So I finally broke down and upgraded to the +8mm WE Chassis. I'm still waiting for a motor to show up, (Peak 17.5) for the meantime until my motor Sponsor Banzai gets more motors in. I haven't made many changes from before, other than the new...
Mojeek [Bot] and 45 guests