Hanibel unpacks his RC garage
- RC104ever
- Approved Member
- Posts: 1506
- Joined: Sun May 22, 2011 11:34 am
- Location: Burlington, Ontario - Canada
- Been thanked: 8 times
Re: Hanibel unpacks his RC garage
I had one of those - the downforce was so great on the first run that the car flipped over and it wrecked the wing on the first try. Too bad, its a cool looking wing.
- Chris
Lots of cars...so many cars
Lots of cars...so many cars
Re: Hanibel unpacks his RC garage
Thanks for the input. It sparked a memory of why I never installed it. You needed to mount it forward of the rear axle to control the downforce, but it killed your control in the air.RC104ever wrote:I had one of those - the downforce was so great on the first run that the car flipped over and it wrecked the wing on the first try. Too bad, its a cool looking wing.
Hanibel
Jefferson City, MO
RC10 Cadillac Gold Tub (in pieces)
RC10 Graphite (currently set up for rear motor class)
RC10 DS (SOLD)
TC3 (Last car I raced)
HPI Micro RS4 (lots of fun in a small package)
RC10B5M (Oval conversion for Street Stock)
Jefferson City, MO
RC10 Cadillac Gold Tub (in pieces)
RC10 Graphite (currently set up for rear motor class)
RC10 DS (SOLD)
TC3 (Last car I raced)
HPI Micro RS4 (lots of fun in a small package)
RC10B5M (Oval conversion for Street Stock)
Re: Hanibel unpacks his RC garage
Next batch of unopened parts. Grabbed these from a hobby shop that was eliminating their RC car area.
Composite Craft Bell Cranks - Lime Green - I have one open set

Composite Craft Mystery part - Not for an RC10. lol

Composite Craft Bell Cranks - Lime Green - I have one open set

Composite Craft Mystery part - Not for an RC10. lol

Hanibel
Jefferson City, MO
RC10 Cadillac Gold Tub (in pieces)
RC10 Graphite (currently set up for rear motor class)
RC10 DS (SOLD)
TC3 (Last car I raced)
HPI Micro RS4 (lots of fun in a small package)
RC10B5M (Oval conversion for Street Stock)
Jefferson City, MO
RC10 Cadillac Gold Tub (in pieces)
RC10 Graphite (currently set up for rear motor class)
RC10 DS (SOLD)
TC3 (Last car I raced)
HPI Micro RS4 (lots of fun in a small package)
RC10B5M (Oval conversion for Street Stock)
Re: Hanibel unpacks his RC garage
That is what I thought. Don't know why I would have bought them. Never owed a pan car. Probably for an AE car though.hugger19 wrote:pan car rear pod side plates
Hanibel
Jefferson City, MO
RC10 Cadillac Gold Tub (in pieces)
RC10 Graphite (currently set up for rear motor class)
RC10 DS (SOLD)
TC3 (Last car I raced)
HPI Micro RS4 (lots of fun in a small package)
RC10B5M (Oval conversion for Street Stock)
Jefferson City, MO
RC10 Cadillac Gold Tub (in pieces)
RC10 Graphite (currently set up for rear motor class)
RC10 DS (SOLD)
TC3 (Last car I raced)
HPI Micro RS4 (lots of fun in a small package)
RC10B5M (Oval conversion for Street Stock)
Re: Hanibel unpacks his RC garage
Now we come to the exciting parts.
Unopened bag of stuff from the RC10

Original a-arms plus steering rack.

Battery Tray

Mechanical Speed control

Unopened bag of stuff from the RC10

Original a-arms plus steering rack.

Battery Tray

Mechanical Speed control

Hanibel
Jefferson City, MO
RC10 Cadillac Gold Tub (in pieces)
RC10 Graphite (currently set up for rear motor class)
RC10 DS (SOLD)
TC3 (Last car I raced)
HPI Micro RS4 (lots of fun in a small package)
RC10B5M (Oval conversion for Street Stock)
Jefferson City, MO
RC10 Cadillac Gold Tub (in pieces)
RC10 Graphite (currently set up for rear motor class)
RC10 DS (SOLD)
TC3 (Last car I raced)
HPI Micro RS4 (lots of fun in a small package)
RC10B5M (Oval conversion for Street Stock)
- Phin
- Approved Member
- Posts: 2809
- Joined: Tue Feb 21, 2012 5:17 pm
- Location: NY²
- Has thanked: 83 times
- Been thanked: 236 times
Re: Hanibel unpacks his RC garage
More likely a CC Predator Lynx, though I've never seen them in plastic....especially not green.Hanibel75 wrote:Probably for an AE car though.
The bellcranks look like they are from when CC took over Houge. Board member Ruffy posted pics of some of his green ones a few years back. They all still had Houge Enterprises written on them though.
Re: Hanibel unpacks his RC garage
Cool. Something else to read up on. The bellcranks are cool to look at but pretty cheap. The set that I opened was blue and the plastic was pretty soft.Phin wrote:More likely a CC Predator Lynx, though I've never seen them in plastic....especially not green.Hanibel75 wrote:Probably for an AE car though.
The bellcranks look like they are from when CC took over Houge. Board member Ruffy posted pics of some of his green ones a few years back. They all still had Houge Enterprises written on them though.
Hanibel
Jefferson City, MO
RC10 Cadillac Gold Tub (in pieces)
RC10 Graphite (currently set up for rear motor class)
RC10 DS (SOLD)
TC3 (Last car I raced)
HPI Micro RS4 (lots of fun in a small package)
RC10B5M (Oval conversion for Street Stock)
Jefferson City, MO
RC10 Cadillac Gold Tub (in pieces)
RC10 Graphite (currently set up for rear motor class)
RC10 DS (SOLD)
TC3 (Last car I raced)
HPI Micro RS4 (lots of fun in a small package)
RC10B5M (Oval conversion for Street Stock)
Re: Hanibel unpacks his RC garage
Last batch of photos from this box
Just the random bits and pieces from the RC10




Just the random bits and pieces from the RC10



Hanibel
Jefferson City, MO
RC10 Cadillac Gold Tub (in pieces)
RC10 Graphite (currently set up for rear motor class)
RC10 DS (SOLD)
TC3 (Last car I raced)
HPI Micro RS4 (lots of fun in a small package)
RC10B5M (Oval conversion for Street Stock)
Jefferson City, MO
RC10 Cadillac Gold Tub (in pieces)
RC10 Graphite (currently set up for rear motor class)
RC10 DS (SOLD)
TC3 (Last car I raced)
HPI Micro RS4 (lots of fun in a small package)
RC10B5M (Oval conversion for Street Stock)
Re: Hanibel unpacks his RC garage
Finally found my bodies. Body 1 & 2 came with the Graphite car i bought.
Body #3 was the original that came with the kit. And a really bad attempt at a fade paint job
Body #4 was my primary racing shell. Slightly better paint job.




I also have a sidewinder body will in its original bag. The photos I shot did not come out so I will try again later
Body #3 was the original that came with the kit. And a really bad attempt at a fade paint job
Body #4 was my primary racing shell. Slightly better paint job.




I also have a sidewinder body will in its original bag. The photos I shot did not come out so I will try again later
Hanibel
Jefferson City, MO
RC10 Cadillac Gold Tub (in pieces)
RC10 Graphite (currently set up for rear motor class)
RC10 DS (SOLD)
TC3 (Last car I raced)
HPI Micro RS4 (lots of fun in a small package)
RC10B5M (Oval conversion for Street Stock)
Jefferson City, MO
RC10 Cadillac Gold Tub (in pieces)
RC10 Graphite (currently set up for rear motor class)
RC10 DS (SOLD)
TC3 (Last car I raced)
HPI Micro RS4 (lots of fun in a small package)
RC10B5M (Oval conversion for Street Stock)
Re: Hanibel unpacks his RC garage
And the Next box is .....


Hanibel
Jefferson City, MO
RC10 Cadillac Gold Tub (in pieces)
RC10 Graphite (currently set up for rear motor class)
RC10 DS (SOLD)
TC3 (Last car I raced)
HPI Micro RS4 (lots of fun in a small package)
RC10B5M (Oval conversion for Street Stock)
Jefferson City, MO
RC10 Cadillac Gold Tub (in pieces)
RC10 Graphite (currently set up for rear motor class)
RC10 DS (SOLD)
TC3 (Last car I raced)
HPI Micro RS4 (lots of fun in a small package)
RC10B5M (Oval conversion for Street Stock)
Re: Hanibel unpacks his RC garage
And here is what was in the Stealth Transmission box







Hanibel
Jefferson City, MO
RC10 Cadillac Gold Tub (in pieces)
RC10 Graphite (currently set up for rear motor class)
RC10 DS (SOLD)
TC3 (Last car I raced)
HPI Micro RS4 (lots of fun in a small package)
RC10B5M (Oval conversion for Street Stock)
Jefferson City, MO
RC10 Cadillac Gold Tub (in pieces)
RC10 Graphite (currently set up for rear motor class)
RC10 DS (SOLD)
TC3 (Last car I raced)
HPI Micro RS4 (lots of fun in a small package)
RC10B5M (Oval conversion for Street Stock)
Re: Hanibel unpacks his RC garage
Next box in the collection
DS10 conversion


DS10 conversion


Hanibel
Jefferson City, MO
RC10 Cadillac Gold Tub (in pieces)
RC10 Graphite (currently set up for rear motor class)
RC10 DS (SOLD)
TC3 (Last car I raced)
HPI Micro RS4 (lots of fun in a small package)
RC10B5M (Oval conversion for Street Stock)
Jefferson City, MO
RC10 Cadillac Gold Tub (in pieces)
RC10 Graphite (currently set up for rear motor class)
RC10 DS (SOLD)
TC3 (Last car I raced)
HPI Micro RS4 (lots of fun in a small package)
RC10B5M (Oval conversion for Street Stock)
Re: Hanibel unpacks his RC garage
And the first things out of this box are motors






And one speed control

And one speed control
Hanibel
Jefferson City, MO
RC10 Cadillac Gold Tub (in pieces)
RC10 Graphite (currently set up for rear motor class)
RC10 DS (SOLD)
TC3 (Last car I raced)
HPI Micro RS4 (lots of fun in a small package)
RC10B5M (Oval conversion for Street Stock)
Jefferson City, MO
RC10 Cadillac Gold Tub (in pieces)
RC10 Graphite (currently set up for rear motor class)
RC10 DS (SOLD)
TC3 (Last car I raced)
HPI Micro RS4 (lots of fun in a small package)
RC10B5M (Oval conversion for Street Stock)
Re: Hanibel unpacks his RC garage
More items from the DS10 box










Hanibel
Jefferson City, MO
RC10 Cadillac Gold Tub (in pieces)
RC10 Graphite (currently set up for rear motor class)
RC10 DS (SOLD)
TC3 (Last car I raced)
HPI Micro RS4 (lots of fun in a small package)
RC10B5M (Oval conversion for Street Stock)
Jefferson City, MO
RC10 Cadillac Gold Tub (in pieces)
RC10 Graphite (currently set up for rear motor class)
RC10 DS (SOLD)
TC3 (Last car I raced)
HPI Micro RS4 (lots of fun in a small package)
RC10B5M (Oval conversion for Street Stock)
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 12 Replies
- 6970 Views
-
Last post by TM Ru22311
-
- 25 Replies
- 2898 Views
-
Last post by Lowgear
-
- 6 Replies
- 2056 Views
-
Last post by Seabass
-
- 4 Replies
- 2754 Views
-
Last post by hondaman
-
- 6 Replies
- 3779 Views
-
Last post by Dazza
-
- 1 Replies
- 2063 Views
-
Last post by greazy
-
- 2 Replies
- 1305 Views
-
Last post by flipwils11
-
- 3 Replies
- 1043 Views
-
Last post by uofmhockey
Who is online
Users browsing this forum: No registered users and 15 guests