870C and Hotdog build

[59burst]

trying 870C rear shocks and tower with Hotdog4. 870C got CC rear tower and I probably go with this setup

[Mr. ED]

First time i try this on my mobile...

PhotoEditor_2015_09_13_21_34_59.jpg (78.07 KiB) Viewed 1235 times

PhotoEditor_2015_09_13_21_34_59.jpg (78.07 KiB) Viewed 1235 times

The battery top strap is missing; i havent run the car for awhile but you get the idea. Beside the battery posts i used 4 servo posts and scrap graphite material. The servo and servo saver were swapped over from right to left

[59burst]

First time i try this on my mobile...

PhotoEditor_2015_09_13_21_34_59.jpg

The battery top strap is missing; i havent run the car for awhile but you get the idea. Beside the battery posts i used 4 servo posts and scrap graphite material. The servo and servo saver were swapped over from right to left

not easy to see from this small picture. but I can't put the battery like that way on my narrow Hotdog4 ( = YR4) chassis for off road.

[Mr. ED]

I found a better app. This should be bigger...
The chassis of the hotdog is large enough to do this, but I don't know whether the body will still fit.

[59burst]

I see how you did with your chassis. but it looks ugly

[Mr. ED]

... but it looks ugly

It looks better with the battery in place and wiring cleaned up

[59burst]

I believe so.
and, thanks for the tip. I might try B44.3 shorty tray

[59burst]

some new pics with the bodies

[59burst]

1/8" thick shock towers and G10 top deck. thanks to GoMachV.
the clearance between the battery and the belt is now 2mm with the epoxy holders