Here is a shot of a black original worlds rear bulkhead. I have taken my re-re rear bulkheads and done the cutting to make them appear the same, it is pretty easy/quick.
Here is a modded re-re rear bulkhead
--Joey --
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
scr8p wrote:You should move the front body mount to the right steering bellcrank as well.
Here's a question. I thought about doing that, but, does the original world's have the hole in the nose plate too? If it does, I can definitely do that, I have the proper screw to do so.
| XXT | XXT 'CR' Graphite Plus | RC10T | RC10T2 | RC10 World's Re-release | HPI Blitz ESE | Schumacher SV2 |
Just need 1/4" rear wheels, the original rear tires (or something similar) and she should be ready for electronics and paint. I may take a stab at doing my own paint on this body, so we'll see.
Proline flat 80's are a similar looking tire they are what I have on my B2 here is a picture.
The original rear wheels still carry the same part no. as the new ones, just that they are 3/16" axle. I'd be fine with using that if those tires are pretty close?
| XXT | XXT 'CR' Graphite Plus | RC10T | RC10T2 | RC10 World's Re-release | HPI Blitz ESE | Schumacher SV2 |
I was kicking the idea around about buying the world's re release car. I've heard good things and bad things about it. What's y'alls opinion on the car and is it worth the buy?
Last post
Oh yeah they're awesome about custom service. When I built my new t5m they replaced a few items for me with no hesitation. Will always run AE vehicles for the value, quality and the way they take care of us racers.
Hi guys. Here is my Team Associated World's Car re-release. I completed the build last year (Sept. 2016). Some of you might remember seeing it. I haven't done anything to it since then, and it has only been driven a couple times. It was a really fun...
Last post
Savox can be loud, I almost always use the same model, some make noise and others not a peep. Go figure. I saw a review online that showed Turnigy 1258 is basically identical but around $40. I may try one.
Well nothing very special since it has already been disclosed here, but I thought I would share this one with you too. I won a 60$ beater Team Car with a world's front end (almost 2 actually) on Ebay and then saw the Composite Craft and...
Don't worry, I have not forgoten the 1993 Kinwald replica, but due to some difficulties with the right Carbon fiber plate of the rear tower, and about the machined motor plate, I work on some extra project until...
Last post
I am in the process of reassembling this car. I have absolutely everything, except this famous part. Do you know if anyone has tried to reproduce it in 3D printing?