NEW! SEXY DETAIL PARTS for the RC4WD V8 Engine + GIVEAWAY!!
Moderator: toyranosaur
- toyranosaur
- Business Member
- Posts: 233
- Joined: Thu Jul 03, 2008 8:50 am
- Location: USA
- Been thanked: 1 time
NEW! SEXY DETAIL PARTS for the RC4WD V8 Engine + GIVEAWAY!!
Awwwrighty Then! RC4WD is known for Stupendously *****in' parts, no? They recently issued this stunning V8 engine, and did all the major work- An impressive piece, to be sure. But, everything can be improved on, and at customer request I did up a few lil' sumpin's fer this beastie. It looks sorta real, but when the hood goes up, there's some major pieces that needed addressing to kick it into the 'Wowza!!' category, and here they are for your perusal.
DESCRIPTION
This kit comes right from the REC mill, and the paint detail is what sets it off. Now, you can use any colour you wish on the valve covers, and to make this easy I'm including some things along with one of my secrets to accomplishing this. Some 800 grit paper, and a Tri-Grit sanding stick that makes the fins look Chromed. (Complete instructions included.) The air cleaner has a Styrene 'Paper' insert, as well as Stainless mesh if you wish: Valve Covers are Complete with Finned Breathers. Distributor has wire as well as a mounting bracket, heat-shrink tubing for 'Boots', tiny Wire Looms to neaten up dat engine bay & not make it look like a giant spider is eating your motor, plus a diagram of the Chevy V8 firing order for easy, accurate plumbing. Hell, there's even a coil to mount wherever you like so the center wire has somewhere to go! A LOT of thought, design & machine time goes into these and you will be Very happy with what you get for your Hard-Earned dollar. Note: The logo is spelled with an 'o' so as not to upset Vic Edelbrock's lawyers. If you prefer, I can change the engraving to 'ROGUE' in block letters, just make sure I know that!
A Quick Video, Below, Shows the Engine a Bit More-I apologize in advance!
https://youtu.be/PXGCAaYhqBQ
ORDERING- PLEASE READ!
* As the PP links never worked all that well, All payments are now sent in USD directly to my Paypal address, [email protected] (Copy & paste address to avoid misspellings.) Free shipping in US.
* International orders will be charged a flat $10 -This covers a whole order regardless of how many are shipped- Who loves ya?
2 WAYS TO OWN!
1- Get on the cut list with a non-refundable deposit of $5 (per kit) BY April 18th. I will then send you a 'Balance Due' (to the SAME Paypal address ONLY) the deposit came from, just before they're ready to ship! Easy!
OR:
2- You can also just pay in full up front, just add $10 for Int'ls, to the total. Simple!
PRICES
Price Per Kit is $99.99 (FREE Shipping in US)
Do NOT send as 'Gift', and be SURE I have your shipping address!
Only US Dollars accepted
Ship date is 'Estimated', as I never know how many I'll be making
Notes
We are a specialty manufacturer that does NOT maintain an inventory, and most items are never re-done again. Please submit your deposit/payment by midnight the 14th of March (12 days): I'll already be cutting, so if you're not on the cut list, you'll very likely miss out.
Feel free to Email with any questions or suggestions, I value customer input!
Many Thanks,
Chris Cazan
Rogue Element Components
Paypal/Email address: [email protected]
Deposit Due/Order Cutoff date: April 18th, 2016
Estimated Shipping Date: May 18th, 2016
------------------------------GIVEAWAY----------------------------
Yup! I am not mentally stable, spo I'm gonna Give a Full Kit to some lucky poster, for doin' almost Nuthin'! So post up quick-like before my Thorazine gets here. Winner will be picked on April 16th, the only rule is you gotta check back here & if you win, contact ME within 7 days- Or I'll keep it! Best of Luck to all, Chris REC
DESCRIPTION
This kit comes right from the REC mill, and the paint detail is what sets it off. Now, you can use any colour you wish on the valve covers, and to make this easy I'm including some things along with one of my secrets to accomplishing this. Some 800 grit paper, and a Tri-Grit sanding stick that makes the fins look Chromed. (Complete instructions included.) The air cleaner has a Styrene 'Paper' insert, as well as Stainless mesh if you wish: Valve Covers are Complete with Finned Breathers. Distributor has wire as well as a mounting bracket, heat-shrink tubing for 'Boots', tiny Wire Looms to neaten up dat engine bay & not make it look like a giant spider is eating your motor, plus a diagram of the Chevy V8 firing order for easy, accurate plumbing. Hell, there's even a coil to mount wherever you like so the center wire has somewhere to go! A LOT of thought, design & machine time goes into these and you will be Very happy with what you get for your Hard-Earned dollar. Note: The logo is spelled with an 'o' so as not to upset Vic Edelbrock's lawyers. If you prefer, I can change the engraving to 'ROGUE' in block letters, just make sure I know that!
A Quick Video, Below, Shows the Engine a Bit More-I apologize in advance!
https://youtu.be/PXGCAaYhqBQ
ORDERING- PLEASE READ!
* As the PP links never worked all that well, All payments are now sent in USD directly to my Paypal address, [email protected] (Copy & paste address to avoid misspellings.) Free shipping in US.
* International orders will be charged a flat $10 -This covers a whole order regardless of how many are shipped- Who loves ya?
2 WAYS TO OWN!
1- Get on the cut list with a non-refundable deposit of $5 (per kit) BY April 18th. I will then send you a 'Balance Due' (to the SAME Paypal address ONLY) the deposit came from, just before they're ready to ship! Easy!
OR:
2- You can also just pay in full up front, just add $10 for Int'ls, to the total. Simple!
PRICES
Price Per Kit is $99.99 (FREE Shipping in US)
Do NOT send as 'Gift', and be SURE I have your shipping address!
Only US Dollars accepted
Ship date is 'Estimated', as I never know how many I'll be making
Notes
We are a specialty manufacturer that does NOT maintain an inventory, and most items are never re-done again. Please submit your deposit/payment by midnight the 14th of March (12 days): I'll already be cutting, so if you're not on the cut list, you'll very likely miss out.
Feel free to Email with any questions or suggestions, I value customer input!
Many Thanks,
Chris Cazan
Rogue Element Components
Paypal/Email address: [email protected]
Deposit Due/Order Cutoff date: April 18th, 2016
Estimated Shipping Date: May 18th, 2016
------------------------------GIVEAWAY----------------------------
Yup! I am not mentally stable, spo I'm gonna Give a Full Kit to some lucky poster, for doin' almost Nuthin'! So post up quick-like before my Thorazine gets here. Winner will be picked on April 16th, the only rule is you gotta check back here & if you win, contact ME within 7 days- Or I'll keep it! Best of Luck to all, Chris REC
- limestang
- Approved Member
- Posts: 898
- Joined: Tue Sep 27, 2011 9:48 am
- Location: Fort Worth, TX
- Has thanked: 25 times
- Been thanked: 160 times
Re: NEW! SEXY DETAIL PARTS for the RC4WD V8 Engine + GIVEAWA
Chris, one of these will go very nicely with my scale crawler, another for my drag car, heck this engine would awesome on anything RC!!!!
- Limestang
- Limestang
Re: NEW! SEXY DETAIL PARTS for the RC4WD V8 Engine + GIVEAWA
definitely in for one. hope you get enough orders....
Re: NEW! SEXY DETAIL PARTS for the RC4WD V8 Engine + GIVEAWA
YOU ARE THE MAN, Count me in, just pure art!!!!
Guess I will be working this Sat , can not afford to pass on this kit !!!!!!
Guess I will be working this Sat , can not afford to pass on this kit !!!!!!
- Diamond Dave
- Approved Member
- Posts: 1500
- Joined: Tue Nov 29, 2011 1:42 am
- Location: Calgary
- Has thanked: 570 times
- Been thanked: 103 times
Re: NEW! SEXY DETAIL PARTS for the RC4WD V8 Engine + GIVEAWA
Chris, that is some great work.
If I needed one, I would buy one for sure.
Still waiting for a one off... Nice work either way.
If I needed one, I would buy one for sure.
Still waiting for a one off... Nice work either way.
- shodog
- Approved Member
- Posts: 3816
- Joined: Thu Oct 05, 2006 3:09 pm
- Location: Washington
- Has thanked: 3 times
- Been thanked: 86 times
- RC10resto
- Super Member
- Posts: 2946
- Joined: Tue Sep 09, 2008 2:26 am
- Location: Los Angeles, CA
- Has thanked: 1138 times
- Been thanked: 441 times
Re: NEW! SEXY DETAIL PARTS for the RC4WD V8 Engine + GIVEAWA
so that explains the YouTube clip's soundtrackYup! I am not mentally stable
- Supernaut
- Approved Member
- Posts: 129
- Joined: Tue Nov 05, 2013 5:30 pm
- Location: Algonac, MI
- Has thanked: 5 times
- Been thanked: 66 times
Re: NEW! SEXY DETAIL PARTS for the RC4WD V8 Engine + GIVEAWA
That looks Great!!!!
Love to build......need to practice painting
Associated - Worlds, B6D
Traxxas - Rad2, TCP, Stampede, Villain IV
Tamiya - CLODBUSTER
As you can see....I sold most of my cars. Funding Pinball now.
Associated - Worlds, B6D
Traxxas - Rad2, TCP, Stampede, Villain IV
Tamiya - CLODBUSTER
As you can see....I sold most of my cars. Funding Pinball now.
- ChisaiKuso
- Approved Member
- Posts: 526
- Joined: Sun Jun 17, 2012 7:50 pm
- Location: United States
- Has thanked: 4 times
- Been thanked: 27 times
Re: NEW! SEXY DETAIL PARTS for the RC4WD V8 Engine + GIVEAWA
In it to win it...
Amazing work as always.
Amazing work as always.
Something clever goes here...
- Diamond Dave
- Approved Member
- Posts: 1500
- Joined: Tue Nov 29, 2011 1:42 am
- Location: Calgary
- Has thanked: 570 times
- Been thanked: 103 times
Re: NEW! SEXY DETAIL PARTS for the RC4WD V8 Engine + GIVEAWA
If I get the win, we can do a server auction with it.
-
- Approved Member
- Posts: 2022
- Joined: Sat Jan 20, 2007 4:41 pm
- Location: Cape Carteret.NC
- Been thanked: 22 times
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0 Replies
- 401 Views
-
Last post by Phin
-
- 24 Replies
- 2583 Views
-
Last post by tiger1
-
- 1 Replies
- 865 Views
-
Last post by GoMachV
-
- 25 Replies
- 2502 Views
-
Last post by farmer
-
- 26 Replies
- 5217 Views
-
Last post by mrlexan
-
- 16 Replies
- 1001 Views
-
Last post by Halgar
-
- 22 Replies
- 1946 Views
-
Last post by Brandon G
-
- 63 Replies
- 8261 Views
-
Last post by limestang
Who is online
Users browsing this forum: No registered users and 0 guests