Thanks -
Everytime I´m about to paint a body, I have big plans; Japanese flags, checkered goal flags, My Little Pony´s and rainbows - Learning airbrush techniques and stuff. (Still have an unsed airbrush sitting on a shelf going on fifth year)
But I always end up with the most simple schemes know to man
I picked up a Losi XX and some parts cars after reading through the threads and seeing the appreciation everyone seems to have for it. My last Losi was a JRXT I had as a kid. I loved that truck and still have it today. While I am not the best driver...
Last post
Wow this is great information. Thank you all for your help. My head was starting to spin reading through all the XX post and looking at the pictures.
I am going to clean them up as 2 buggies and a truck. I just wanted to try to keep them as...
Drove my T2 this past weekend at my local indoor clay track for the first time since refurbishing it. Truck was good on straights and jumping, but turns were a nightmare! The first issue is my rear universals were popping out when I drove it hard...
Last post
Thanks for the tips Joey. After a few weeks of trial and error, I have the truck setup nice. Is there a blank T2 setup sheet floating around? I couldn't find one. Anyway here is where I'm at. No bones slipping out of the drives either.
I have a few T3 runners so I have collected quite a few parts of the years. My daughter is getting to the age where I thought I'd put a truck together for her too. After digging thru my stuff I discovered I have enough parts to build a truck with...
Last post
Cool build you've got. I've become a big fan of the T3/B2/3 series over the past year. I am nearly done with my T3, and currently working on my B3.
That's nice! I believe you picked up a B3 from me in 2021. My all new build I did similar to my T3...
So I am just getting back into this with my kids since about the time when these Masami cars first hit the stage, so this is probably a bit of a stupid question.
Where would be a smart place to get the parts to complete one of these chassis kits. I...
Last post
You would need someone willing to sell you a complete set..
You re looking at ..expensive..
Kit 200
3d parts 120
Hingepins and turnbuckles 60
Shocks 80
unis and misc parts (bearings etc..) 100
Stealth, motor plate etc 80
I was going to start disassemble and clean my 10T when I had a thought. Do I have enough spare parts to put another tub together? The answer of course was yes. It may not be pretty or complete(yet) :D But it has some cool stuff on it.Nothing was...
Last post
Thats pretty cool that you built that with spare parts man. I need to buy some more parts lots my stock pile is looking a little low. great job
I have been collecting these parts for years now and finally have made a start on building the car. I can't believe some of the differences with the XLS.
Happy new year to all
Cheers
Alan
Last post
Any more upto date pics Alan I'm very interested to see how it is now as I'm starting to source parts for one aswell
Even though this is technically a buggy, I'm doing a truck conversion with it.
The plan is to build as much of it from my parts/junk boxes as possible. Of what you see here, the transmission ($40 parts trans)and rear control arms are the only...
Last post
Lookin' good! At first I thought this was gonna be a straight 10T build but it's more of an old school conversion! I fondly remember the truck conversion wars from bitd. I snapped up an Eagle right when they came out. Looking back on it now, all it...