Post Pictures of your Losi Vehicles
-
- Regular Member
- Posts: 5
- Joined: Thu Aug 31, 2017 6:38 am
- Location: United Kingdom
- Has thanked: 2 times
- Been thanked: 4 times
Re: Post Pictures of your Losi Vehicles
Got a small collection on the go now:
First up is my NIB Losi XX4 Graphite. Recently found in South Africa and shipped to the UK. I may build it one day, but for now stays in the collection:
Next is my XX4 runner. Recently completed a full rebuild on this car with some NIP parts. This is going to be my runner so fitted up with all the Rusti carbon parts, metal motor clamp (not Trinity, but unsure who made it?) Lunsford turnbuckles and Losi white ball ends among others.
Next is my Losi XX Runner. Bought this in terrible condition, but has cleaned up very well again with many NIP parts. Once again a runner so all the Rusti carbon parts along with new Lunsford turnbuckles and Losi white rod ends. Bit of a theme here with my runners ...!
And a brand new Losi XX shell for it once I decide on paint. Managed to source two of these for next to nothing...!
Next up on the workbench is this Losi XXXT MF1 I found on Ebay. An absolute bargain which looks to have been hardly used. Unfortunately missing the all important red plastics. So far I have a brand new set of red wheels for it, a long way to go sourcing the rest!
And my final project, a boxed Losi Mini T Pro. Scored this cheap on Ebay recently too, and only used twice. Not going to run this one, but instead fully rebuild and clean adding some red trinity parts, and anything else I can find. Great memories racing the Mini T back in the day, so one for the shelf.
First up is my NIB Losi XX4 Graphite. Recently found in South Africa and shipped to the UK. I may build it one day, but for now stays in the collection:
Next is my XX4 runner. Recently completed a full rebuild on this car with some NIP parts. This is going to be my runner so fitted up with all the Rusti carbon parts, metal motor clamp (not Trinity, but unsure who made it?) Lunsford turnbuckles and Losi white ball ends among others.
Next is my Losi XX Runner. Bought this in terrible condition, but has cleaned up very well again with many NIP parts. Once again a runner so all the Rusti carbon parts along with new Lunsford turnbuckles and Losi white rod ends. Bit of a theme here with my runners ...!
And a brand new Losi XX shell for it once I decide on paint. Managed to source two of these for next to nothing...!
Next up on the workbench is this Losi XXXT MF1 I found on Ebay. An absolute bargain which looks to have been hardly used. Unfortunately missing the all important red plastics. So far I have a brand new set of red wheels for it, a long way to go sourcing the rest!
And my final project, a boxed Losi Mini T Pro. Scored this cheap on Ebay recently too, and only used twice. Not going to run this one, but instead fully rebuild and clean adding some red trinity parts, and anything else I can find. Great memories racing the Mini T back in the day, so one for the shelf.
-
- Approved Member
- Posts: 98
- Joined: Sun Jun 28, 2020 7:15 pm
- Location: Sweden
- Has thanked: 57 times
- Been thanked: 122 times
Re: Post Pictures of your Losi Vehicles
Those are some clean cars!
Super nice!
I never got into 4wd. But that XX4 has attracted my interest.
Super nice!
I never got into 4wd. But that XX4 has attracted my interest.
Johan
My Jrx2: https://www.rc10talk.com/viewtopic.php?f=27&t=45835
Scrapheap Junior: https://www.rc10talk.com/viewtopic.php?f=27&t=46034
JRX-PRO - The racer: https://www.rc10talk.com/viewtopic.php?f=27&t=46890
My Jrx2: https://www.rc10talk.com/viewtopic.php?f=27&t=45835
Scrapheap Junior: https://www.rc10talk.com/viewtopic.php?f=27&t=46034
JRX-PRO - The racer: https://www.rc10talk.com/viewtopic.php?f=27&t=46890
- Lavigna
- Approved Member
- Posts: 1342
- Joined: Wed Aug 05, 2015 8:24 am
- Location: Petaluma, CA
- Has thanked: 925 times
- Been thanked: 1115 times
Re: Post Pictures of your Losi Vehicles
^ Alexo - Great looking builds. I just placed an order from Rusti Designs myself for an upcoming XX Runner build.
I am jealous of your NIB XX4. That is a great find. Here is my XX4.
I am jealous of your NIB XX4. That is a great find. Here is my XX4.
My Photo Gallery --->https://www.rc10talk.com/viewtopic.php?f=77&t=38934
-
- Approved Member
- Posts: 98
- Joined: Sun Jun 28, 2020 7:15 pm
- Location: Sweden
- Has thanked: 57 times
- Been thanked: 122 times
Re: Post Pictures of your Losi Vehicles
This is the Losi that I had when I stopped competing.
XX CR, Novak Cyclone, Futaba reciever and 9401 servo, Extreme Motorsport 12x2 and Team Orion Vmax 2000 batteies.
Still got the box, spares, manual and setup sheets. Apparently finished 3:rd out of 15 in the last race.
Still makes me smile!
Never done anything to it since the last running. Still got oil in all the shocks, but the Hydradrive is empty.XX CR, Novak Cyclone, Futaba reciever and 9401 servo, Extreme Motorsport 12x2 and Team Orion Vmax 2000 batteies.
Still got the box, spares, manual and setup sheets. Apparently finished 3:rd out of 15 in the last race.
Still makes me smile!
Johan
My Jrx2: https://www.rc10talk.com/viewtopic.php?f=27&t=45835
Scrapheap Junior: https://www.rc10talk.com/viewtopic.php?f=27&t=46034
JRX-PRO - The racer: https://www.rc10talk.com/viewtopic.php?f=27&t=46890
My Jrx2: https://www.rc10talk.com/viewtopic.php?f=27&t=45835
Scrapheap Junior: https://www.rc10talk.com/viewtopic.php?f=27&t=46034
JRX-PRO - The racer: https://www.rc10talk.com/viewtopic.php?f=27&t=46890
-
- Approved Member
- Posts: 76
- Joined: Sun Feb 07, 2021 7:14 pm
- Location: Indiana
- Has thanked: 191 times
- Been thanked: 41 times
Re: Post Pictures of your Losi Vehicles
The one that started it all, the XXT CR. My first Losi truck, now restored basically the way I ran it back in the day. Blue Associated hardware & shock mounts, HG titanium top shaft & diff nut, dual-disk slipper, MIP Lite Drives & aluminum CVDs, RPM gear cover, front bumper & rod ends, Lunsford titanium turnbuckles, Rear swaybar, a few graphite goodies, Tekin G12c III, Futaba AM radio gear, Green Machine. Sanyo 2000 cells (for display only). I did the body work. She's a shelf queen.
The truck I wanted but couldn't afford as a kid, the XXT CR Graphite +, with all the Trinity bling, a Novak Cyclone & Mercury. I got the body used. (If only it had a D2!) I actually run this one... carefully. The Trinity Chamelon Pro is pretty quick.
I recently got into LXTs, this one I've restored to original down to the screws, with the retrofit trans/hydradrive, the only non-Losi hard parts are Lunsford titanium turnbuckles. I even found some NOS aluminum axles. It has a Novak Tempest & Mercury (even though they're a little past the truck's era). The body is painted as homage to the Pro-SE buggy, Bradley Fine Design did the body work.
And the LXT runner that I'm still not quite finished with. It has some blue Associated hardware, some purple Sabula Tech hardware & ESC shelf, RPM front bulkhead, Factory Works front & rear wheels, some old Pro-Line rubber, and modern Reedy 3300kv brushless combo. I haven't even driven it yet.
-
- Regular Member
- Posts: 25
- Joined: Thu Jan 23, 2020 7:50 pm
- Location: NJ
- Has thanked: 12 times
- Been thanked: 18 times
Re: Post Pictures of your Losi Vehicles
Just a couple of mine. LXT Collection(Top right is my original one) the two others were parts trucks and my new to me XX-CR. Missing are pictures of my original XXT-CR and a NIB XXT-CR
Current Collection:
LXT (my original and 3 for parts)
XXT CR (my original and 1 NIB)
XX-CR
Clodbuster
Super Clodbuster
RC10LSS
RC12L - NIB
Blackfoot
Nissan King Cab
RC10 Worlds Car Re-Re
Bear Hawk - In transit
LXT (my original and 3 for parts)
XXT CR (my original and 1 NIB)
XX-CR
Clodbuster
Super Clodbuster
RC10LSS
RC12L - NIB
Blackfoot
Nissan King Cab
RC10 Worlds Car Re-Re
Bear Hawk - In transit
- Lavigna
- Approved Member
- Posts: 1342
- Joined: Wed Aug 05, 2015 8:24 am
- Location: Petaluma, CA
- Has thanked: 925 times
- Been thanked: 1115 times
Re: Post Pictures of your Losi Vehicles
Losi XX Kinwald build
My Photo Gallery --->https://www.rc10talk.com/viewtopic.php?f=77&t=38934
- Lavigna
- Approved Member
- Posts: 1342
- Joined: Wed Aug 05, 2015 8:24 am
- Location: Petaluma, CA
- Has thanked: 925 times
- Been thanked: 1115 times
Re: Post Pictures of your Losi Vehicles
Keep the pictures coming!
My Photo Gallery --->https://www.rc10talk.com/viewtopic.php?f=77&t=38934
- Essejay
- Approved Member
- Posts: 70
- Joined: Sat Apr 02, 2016 6:15 am
- Location: Angers, France
- Has thanked: 101 times
- Been thanked: 78 times
Re: Post Pictures of your Losi Vehicles
Hello!
Two pictures from my Junior T (sorry for the quality of the pictures, made from a cheap mobile phone and during the night )
Have a nice week-end!
Essejay
Two pictures from my Junior T (sorry for the quality of the pictures, made from a cheap mobile phone and during the night )
Have a nice week-end!
Essejay
- Essejay
- Approved Member
- Posts: 70
- Joined: Sat Apr 02, 2016 6:15 am
- Location: Angers, France
- Has thanked: 101 times
- Been thanked: 78 times
Re: Post Pictures of your Losi Vehicles
I have a few other Losi cars, I will try to post some pictures
-
- Similar Topics
- Replies
- Views
- Last post
-
- 21 Replies
- 3361 Views
-
Last post by jwscab
-
- 28 Replies
- 3697 Views
-
Last post by paNX2K&SE-R
-
- 18 Replies
- 2651 Views
-
Last post by tamiya
-
- 4 Replies
- 777 Views
-
Last post by slapshot1979
-
- 20 Replies
- 1590 Views
-
Last post by purpletimbo
-
- 4 Replies
- 1330 Views
-
Last post by BIGHUNGRY755
-
- 7 Replies
- 1197 Views
-
Last post by RichieRich
-
- 19 Replies
- 5277 Views
-
Last post by USA-1
Who is online
Users browsing this forum: Amazon [Bot], CommonCrawl [Bot] and 0 guests