Houge RC10 with prototype trailing arms
-
- Regular Member
- Posts: 11
- Joined: Wed Oct 09, 2019 12:34 am
- Location: Switzerland
- Has thanked: 19 times
- Been thanked: 15 times
Houge RC10 with prototype trailing arms
I got infected with the vintage RC virus some years back. Over time, many cars and parts have accumulated. Now it’s time to post updates on the various projects I am working on.
Some of these projects will move slowly as I am still acquiring the necessary pieces.
First project I would like to share is a Houge chassis which will be complimented with prototype aluminium arms. Other goodies included are a Houge special stearing kit, a team pit stop chain transmission and a white Andy’s pro race bulkhead.
I will start with the photos of the initial car and parts and will then gradually post progress.
Pls do post comments and thoughts about this build if you are interested.
Some of these projects will move slowly as I am still acquiring the necessary pieces.
First project I would like to share is a Houge chassis which will be complimented with prototype aluminium arms. Other goodies included are a Houge special stearing kit, a team pit stop chain transmission and a white Andy’s pro race bulkhead.
I will start with the photos of the initial car and parts and will then gradually post progress.
Pls do post comments and thoughts about this build if you are interested.
-
- Regular Member
- Posts: 11
- Joined: Wed Oct 09, 2019 12:34 am
- Location: Switzerland
- Has thanked: 19 times
- Been thanked: 15 times
-
- Regular Member
- Posts: 11
- Joined: Wed Oct 09, 2019 12:34 am
- Location: Switzerland
- Has thanked: 19 times
- Been thanked: 15 times
Re: Houge RC10 with prototype trailing arms
On the way (due to difficulty sourcing the original shock towers)
- GoMachV
- Approved Member
- Posts: 11693
- Joined: Mon Apr 30, 2012 2:31 am
- Location: Twin Falls, ID
- Has thanked: 883 times
- Been thanked: 2878 times
Re: Houge RC10 with prototype trailing arms
Looks like the TPS Nova chassis set. Traxxas up front, RC10 at the rear. Have a look at the upper chassis and the servo mount drill pattern...https://www.rc10talk.com/viewtopic.php?t=30125
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- duckhead
- Approved Member
- Posts: 501
- Joined: Fri Nov 06, 2015 5:41 pm
- Location: Minooka, IL
- Has thanked: 128 times
- Been thanked: 155 times
Re: Houge RC10 with prototype trailing arms
I was just going to say that those arms really looks like Traxxas arms, and I have never seen a front bulkhead like that before.GoMachV wrote: ↑Wed Mar 31, 2021 3:53 pm Looks like the TPS Nova chassis set. Traxxas up front, RC10 at the rear. Have a look at the upper chassis and the servo mount drill pattern...https://www.rc10talk.com/viewtopic.php?t=30125
I didn't even know TPS made a chassis set like that. I assume it was a custom job from Composite Craft?
Very cool period piece!
- jwscab
- Approved Member
- Posts: 6536
- Joined: Wed Jan 28, 2009 2:42 pm
- Location: Chalfont, PA
- Has thanked: 11 times
- Been thanked: 469 times
Re: Houge RC10 with prototype trailing arms
yes, that is what that chassis is. VERY COOL. traxxas bullet stuff up front.
-
- Regular Member
- Posts: 11
- Joined: Wed Oct 09, 2019 12:34 am
- Location: Switzerland
- Has thanked: 19 times
- Been thanked: 15 times
Re: Houge RC10 with prototype trailing arms
Thanks all for the help and the positive words.
Would you have any suggestions about where to go with this build?
I wanted to add the aluminum front and trailing arms - but am now having second thoughts.
Maybe the car should just be cleaned and left as is - as a time piece?
Would you have any suggestions about where to go with this build?
I wanted to add the aluminum front and trailing arms - but am now having second thoughts.
Maybe the car should just be cleaned and left as is - as a time piece?
- duckhead
- Approved Member
- Posts: 501
- Joined: Fri Nov 06, 2015 5:41 pm
- Location: Minooka, IL
- Has thanked: 128 times
- Been thanked: 155 times
Re: Houge RC10 with prototype trailing arms
Are those original prototype Houge arms on the left? Never seen them in white before. Machined or injected?
All the aluminum bits on the right prototypes that Ruffy did? I remember him doing some prototype rear trailing arms, but I have never seen the front arms or steering bellcrank, very cool! Are the arms the same width as Andy's Pro Race arms?
- duckhead
- Approved Member
- Posts: 501
- Joined: Fri Nov 06, 2015 5:41 pm
- Location: Minooka, IL
- Has thanked: 128 times
- Been thanked: 155 times
Re: Houge RC10 with prototype trailing arms
HoudiniTheG wrote: ↑Wed Mar 31, 2021 4:20 pm Thanks all for the help and the positive words.
Would you have any suggestions about where to go with this build?
I wanted to add the aluminum front and trailing arms - but am now having second thoughts.
Maybe the car should just be cleaned and left as is - as a time piece?
If it was me, I'd clean it up and keep it intact as a period time piece.
The stuff that Ruffy did almost deserves it's own build, in Andy's Pro Race fashion. Tough stuff to source, but the towers that Jeff just did are a start!
- TheDiamondOne
- Approved Member
- Posts: 446
- Joined: Fri Nov 12, 2010 7:26 pm
- Location: Energy, IL
- Has thanked: 1744 times
- Been thanked: 458 times
Re: Houge RC10 with prototype trailing arms
Cool build! The TPS tranny is the icing on the cake! Awsome
David, The artist formerly known as coxbros
-
- Regular Member
- Posts: 11
- Joined: Wed Oct 09, 2019 12:34 am
- Location: Switzerland
- Has thanked: 19 times
- Been thanked: 15 times
Re: Houge RC10 with prototype trailing arms
Thanks all!!!
Some answers to the questions raised:
- The white arms are machined
- According to my mail exchange with Ruffy, the aluminum parts are the real Houge prototypes
- I am not sure about the width of the front arms, but will soon be able to tell
The idea to add the aluminum prototype parts to the chassis was inspired by a chassis that was recently available on the bay. Unfortunately, it sold at a rather high price, so missed out on that one...
Below pics of this other chassis and parts:
Some answers to the questions raised:
- The white arms are machined
- According to my mail exchange with Ruffy, the aluminum parts are the real Houge prototypes
- I am not sure about the width of the front arms, but will soon be able to tell
The idea to add the aluminum prototype parts to the chassis was inspired by a chassis that was recently available on the bay. Unfortunately, it sold at a rather high price, so missed out on that one...
Below pics of this other chassis and parts:
- duckhead
- Approved Member
- Posts: 501
- Joined: Fri Nov 06, 2015 5:41 pm
- Location: Minooka, IL
- Has thanked: 128 times
- Been thanked: 155 times
Re: Houge RC10 with prototype trailing arms
HoudiniTheG wrote: ↑Wed Mar 31, 2021 5:46 pm Thanks all!!!
Some answers to the questions raised:
- The white arms are machined
- According to my mail exchange with Ruffy, the aluminum parts are the real Houge prototypes
- I am not sure about the width of the front arms, but will soon be able to tell
The idea to add the aluminum prototype parts to the chassis was inspired by a chassis that was recently available on the bay. Unfortunately, it sold at a rather high price, so missed out on that one...
Below pics of this other chassis and parts:
Interesting about the white arms, do you have a few closer up photos? The reason I am curious is I have never seen the plastic arms in white, and it also looks like there are ejector pin marks on them which makes me think these are injected molded, not machined.
If you look close at the right arm you can see the ejector pins marks (the round circles). What also intrigues me about the white arms is they do not appear to have the "HOUGE ENTERPRISES" marking on them. Maybe an early prototype mold?
Houge did have some early (I guess they could be called prototype) aluminum arms before the black injection molded arms came out.
Reason I asked about Ruffy's was that I thought possibly they were the prototypes he personally did here: https://www.rc10talk.com/viewtopic.php?f=35&t=14968&start=45#p153548 If so, that is really cool!
Regarding that prototype Andy's chassis, I watched that auction too I am curious if anyone on here was the winner of it. It got too rich for my blood, but I have some regret that I didn't go big on it. That is one of a kind...
In case you haven't figured it out, I have an unhealthy relationship with anything Houge, Andy's (Pro Race) stuff
->Mark
- jwscab
- Approved Member
- Posts: 6536
- Joined: Wed Jan 28, 2009 2:42 pm
- Location: Chalfont, PA
- Has thanked: 11 times
- Been thanked: 469 times
Re: Houge RC10 with prototype trailing arms
I would build it as designed. Tps trans, bullet front end parts. I'd probably put the machined white houge arms on it.
-
- Regular Member
- Posts: 11
- Joined: Wed Oct 09, 2019 12:34 am
- Location: Switzerland
- Has thanked: 19 times
- Been thanked: 15 times
Re: Houge RC10 with prototype trailing arms
Hi Mark
You were right : the white arms are indeed injection moulded - see below a more detailed picture. They are also marked.
Thanks to everyone for the interest and helpful insights - much appreciated!!
Am still a bit torn on what to do with the build. Will for sure though update the thread as soon as there is some progress.
You were right : the white arms are indeed injection moulded - see below a more detailed picture. They are also marked.
Thanks to everyone for the interest and helpful insights - much appreciated!!
Am still a bit torn on what to do with the build. Will for sure though update the thread as soon as there is some progress.
- highwayracer
- Approved Member
- Posts: 1187
- Joined: Thu Dec 13, 2007 2:43 am
- Location: Illinois, USA
- Been thanked: 3 times
Re: Houge RC10 with prototype trailing arms
hello Everyone,
I haven't been here in a while, but I have some info on the various aluminum arms that are posted on this thread.
The first pictures of the ebay car with the large aluminum rear arms are actually the Andy's prototypes that were done in conjunction with houge. I was told these were produced right around the time the molded chassus was being discussed...becasue houge wanted to use a molded graphite chassis. I received this information from Andy a few years ago when I found a different picture of the arms online.
The second pair of rear arms that look like the plastic houge were actually sold by Race Prep. They were made for a kyosho car, but slightly longer. Jim Deiter began making chassis and installed those arms on RC10s. One of the cars is at a local hobby shop...and I went there to take a closer look. It just so happens that there was an old school racer that knew about the car...and he also had 2 sets of arms. One set was purchased by a frined of mine while the other car will be restored and given back to Jim,. Jim's car is at a local hobby shop and is a little different than others because of the gray delrin used to make the arm mounts and body mounts.
As for houge, after they saw the aluminum version, they began making the plastic version. I do not know if they received approval from Race prep.
Roger
I haven't been here in a while, but I have some info on the various aluminum arms that are posted on this thread.
The first pictures of the ebay car with the large aluminum rear arms are actually the Andy's prototypes that were done in conjunction with houge. I was told these were produced right around the time the molded chassus was being discussed...becasue houge wanted to use a molded graphite chassis. I received this information from Andy a few years ago when I found a different picture of the arms online.
The second pair of rear arms that look like the plastic houge were actually sold by Race Prep. They were made for a kyosho car, but slightly longer. Jim Deiter began making chassis and installed those arms on RC10s. One of the cars is at a local hobby shop...and I went there to take a closer look. It just so happens that there was an old school racer that knew about the car...and he also had 2 sets of arms. One set was purchased by a frined of mine while the other car will be restored and given back to Jim,. Jim's car is at a local hobby shop and is a little different than others because of the gray delrin used to make the arm mounts and body mounts.
As for houge, after they saw the aluminum version, they began making the plastic version. I do not know if they received approval from Race prep.
Roger
-
- Similar Topics
- Replies
- Views
- Last post
-
- 8 Replies
- 1407 Views
-
Last post by RC10Eh
-
- 18 Replies
- 1939 Views
-
Last post by mrlexan
-
- 7 Replies
- 1457 Views
-
Last post by duckhead
-
- 5 Replies
- 1599 Views
-
Last post by Zac_F71
-
- 21 Replies
- 2507 Views
-
Last post by RichieRich
-
- 2 Replies
- 169 Views
-
Last post by Bottom Feeder
-
- 0 Replies
- 484 Views
-
Last post by mrlexan
-
- 5 Replies
- 1343 Views
-
Last post by railey72
Who is online
Users browsing this forum: Bing [Bot], CommonCrawl [Bot], Facebook [Bot] and 2 guests